mariadb

Commit Graph

Author	SHA1	Message	Date
Marko Mäkelä	4c50120d14	MDEV-23474 InnoDB fails to restart after SET GLOBAL innodb_log_checksums=OFF Regretfully, the parameter innodb_log_checksums was introduced in MySQL 5.7.9 (the first GA release of that series) by mysql/mysql-server@af0acedd885eb7103e319f79d25fda7386ef1506 which partly replaced a parameter that had been introduced in 5.7.8 mysql/mysql-server@22ba38218e1d76c24f69b5a5595ad3bf5933acb0 as innodb_log_checksum_algorithm. Given that the CRC-32C operations are accelerated on many processor implementations (AMD64 with SSE4.2; since MDEV-22669 also on IA-32 with SSE4.2, POWER 8 and later, ARMv8 with some extensions) and by lookup tables when only generic SISD instructions are available, there should be no valid reason to disable checksums. In MariaDB 10.5.2, as a preparation for MDEV-12353, MDEV-19543 deprecated and ignored the parameter innodb_log_checksums altogether. This should imply that after a clean shutdown with innodb_log_checksums=OFF one cannot upgrade to MariaDB Server 10.5 at all. Due to these problems, let us deprecate the parameter innodb_log_checksums and honor it only during server startup. The command SET GLOBAL innodb_log_checksums will always set the parameter to ON.	5 years ago
Vlad Lesin	d39d5dd2bc	MDEV-20060: Failing assertion: srv_log_file_size <= 512ULL << 30 while preparing backup The general reason why innodb redo log file is limited by 512G is that log_block_convert_lsn_to_no() returns value limited by 1G. But there is no need to have unique log block numbers in log group. The fix removes 512G limit and limits log group size by (uint32_t maximum value) * (minimum page size), which, in turns, can be removed if fil_io() is no longer used for innodb redo log io.	6 years ago
Vicențiu Ciorbaru	5543b75550	Update FSF Address * Update wrong zip-code	7 years ago
Vicențiu Ciorbaru	c0ac0b8860	Update FSF address	7 years ago
Marko Mäkelä	59caf2c3c1	MDEV-13485 MTR tests fail massively with --innodb-sync-debug The parameter --innodb-sync-debug, which is disabled by default, aims to find potential deadlocks in InnoDB. When the parameter is enabled, lots of tests failed. Most of these failures were due to bogus diagnostics. But, as part of this fix, we are also fixing a bug in error handling code and removing dead code, and fixing cases where an uninitialized mutex was being locked and unlocked. dict_create_foreign_constraints_low(): Remove an extraneous mutex_exit() call that could cause corruption in an error handling path. Also, do not unnecessarily acquire dict_foreign_err_mutex. Its only purpose is to control concurrent access to dict_foreign_err_file. row_ins_foreign_trx_print(): Replace a redundant condition with a debug assertion. srv_dict_tmpfile, srv_dict_tmpfile_mutex: Remove. The temporary file is never being written to or read from. log_free_check(): Allow SYNC_FTS_CACHE (fts_cache_t::lock) to be held. ha_innobase::inplace_alter_table(), row_merge_insert_index_tuples(): Assert that no unexpected latches are being held. sync_latch_meta_init(): Properly initialize dict_operation_lock_key at SYNC_DICT_OPERATION. dict_sys->mutex is SYNC_DICT, and the now-removed SRV_DICT_TMPFILE was wrongly registered at SYNC_DICT_OPERATION. buf_block_init(): Correctly register buf_block_t::debug_latch. It was previously misleadingly reported as LATCH_ID_DICT_FOREIGN_ERR. latch_level_t: Correct the relative latching order of SYNC_IBUF_PESS_INSERT_MUTEX,SYNC_INDEX_TREE and SYNC_FILE_FORMAT_TAG,SYNC_DICT_OPERATION to avoid bogus failures. row_drop_table_for_mysql(): Avoid accessing btr_defragment_mutex if the defragmentation thread has not been started. This is the case during fts_drop_orphaned_tables() in recv_recovery_rollback_active(). fil_space_destroy_crypt_data(): Avoid acquiring fil_crypt_threads_mutex when it is uninitialized. We may have created crypt_data before the mutex was created, and the mutex creation would be skipped if InnoDB startup failed or --innodb-read-only was specified.	8 years ago
Marko Mäkelä	8c71c6aa8b	MDEV-12548 Initial implementation of Mariabackup for MariaDB 10.2 InnoDB I/O and buffer pool interfaces and the redo log format have been changed between MariaDB 10.1 and 10.2, and the backup code has to be adjusted accordingly. The code has been simplified, and many memory leaks have been fixed. Instead of the file name xtrabackup_logfile, the file name ib_logfile0 is being used for the copy of the redo log. Unnecessary InnoDB startup and shutdown and some unnecessary threads have been removed. Some help was provided by Vladislav Vaintroub. Parameters have been cleaned up and aligned with those of MariaDB 10.2. The --dbug option has been added, so that in debug builds, --dbug=d,ib_log can be specified to enable diagnostic messages for processing redo log entries. By default, innodb_doublewrite=OFF, so that --prepare works faster. If more crash-safety for --prepare is needed, double buffering can be enabled. The parameter innodb_log_checksums=OFF can be used to ignore redo log checksums in --backup. Some messages have been cleaned up. Unless --export is specified, Mariabackup will not deal with undo log. The InnoDB mini-transaction redo log is not only about user-level transactions; it is actually about mini-transactions. To avoid confusion, call it the redo log, not transaction log. We disable any undo log processing in --prepare. Because MariaDB 10.2 supports indexed virtual columns, the undo log processing would need to be able to evaluate virtual column expressions. To reduce the amount of code dependencies, we will not process any undo log in prepare. This means that the --export option must be disabled for now. This also means that the following options are redundant and have been removed: xtrabackup --apply-log-only innobackupex --redo-only In addition to disabling any undo log processing, we will disable any further changes to data pages during --prepare, including the change buffer merge. This means that restoring incremental backups should reliably work even when change buffering is being used on the server. Because of this, preparing a backup will not generate any further redo log, and the redo log file can be safely deleted. (If the --export option is enabled in the future, it must generate redo log when processing undo logs and buffered changes.) In --prepare, we cannot easily know if a partial backup was used, especially when restoring a series of incremental backups. So, we simply warn about any missing files, and ignore the redo log for them. FIXME: Enable the --export option. FIXME: Improve the handling of the MLOG_INDEX_LOAD record, and write a test that initiates a backup while an ALGORITHM=INPLACE operation is creating indexes or rebuilding a table. An error should be detected when preparing the backup. FIXME: In --incremental --prepare, xtrabackup_apply_delta() should ensure that if FSP_SIZE is modified, the file size will be adjusted accordingly.	8 years ago
Marko Mäkelä	50faeda4d6	Remove trx_t::has_search_latch and simplify debug code When the btr_search_latch was split into an array of latches in MySQL 5.7.8 as part of the Oracle Bug#20985298 fix, the "caching" of the latch across storage engine API calls was removed, and the field trx->has_search_latch would only be set during a short time frame in the execution of row_search_mvcc(), which was formerly called row_search_for_mysql(). This means that the column INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_LATCHED will always report 0. That column cannot be removed in MariaDB 10.2, but it can be removed in future releases. trx_t::has_search_latch: Remove. trx_assert_no_search_latch(): Remove. row_sel_try_search_shortcut_for_mysql(): Remove a redundant condition on trx->has_search_latch (it was always true). sync_check_iterate(): Make the parameter const. sync_check_functor_t: Make the operator() const, and remove result() and the virtual destructor. There is no need to have mutable state in the functors. sync_checker<bool>: Replaces dict_sync_check and btrsea_sync_check. sync_check: Replaces btrsea_sync_check. dict_sync_check: Instantiated from sync_checker. sync_allowed_latches: Use std::find() directly on the array. Remove the std::vector. TrxInInnoDB::enter(), TrxInInnoDB::exit(): Remove obviously redundant debug assertions on trx->in_depth, and use equality comparison against 0 because it could be more efficient on some architectures.	8 years ago
Marko Mäkelä	63574f1275	MDEV-11690 Remove UNIV_HOTBACKUP The InnoDB source code contains quite a few references to a closed-source hot backup tool which was originally called InnoDB Hot Backup (ibbackup) and later incorporated in MySQL Enterprise Backup. The open source backup tool XtraBackup uses the full database for recovery. So, the references to UNIV_HOTBACKUP are only cluttering the source code.	9 years ago
Jan Lindström	fec844aca8	Merge InnoDB 5.7 from mysql-5.7.14. Contains also: MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE \|\| m_lock_type != 2' failed. (branch bb-10.2-jan) Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan) enable tests that were fixed in MDEV-10549 MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan) fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables	9 years ago
Jan Lindström	2e814d4702	Merge InnoDB 5.7 from mysql-5.7.9. Contains also MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7 The failure happened because 5.7 has changed the signature of the bool handler::primary_key_is_clustered() const virtual function ("const" was added). InnoDB was using the old signature which caused the function not to be used. MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7 Fixed mutexing problem on lock_trx_handle_wait. Note that rpl_parallel and rpl_optimistic_parallel tests still fail. MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan) Reason: incorrect merge MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan) Reason: incorrect merge	9 years ago
Sergei Golubchik	6d06fbbd1d	move to storage/innobase	11 years ago
Sergei Golubchik	14a142fca6	move to storage/xtradb	11 years ago
Sergei Golubchik	fd39c56eff	move to storage/xtradb/	11 years ago
Sergei Golubchik	014214d034	percona-server-5.5.39-36.0	11 years ago
Sergei Golubchik	89b6517c4c	percona-server-5.6.20-68.0	11 years ago
Sergei Golubchik	0175860925	initial commit into innodb-5.6 mergetree	12 years ago
Sergei Golubchik	52c26f7a1f	Percona-Server-5.6.14-rel62.0.tar.gz	12 years ago
Sergei Golubchik	dbd009d661	Percona-Server-5.5.33-rel31.1.tar.gz	12 years ago
Sergei Golubchik	bcfa90b471	Percona-Server-5.5.30-rel30.2.tar.gz	13 years ago
Sergei Golubchik	54ab9ea20f	xtradb 5.5.13	14 years ago
unknown	9ec2d5b6e5	Updated with changes from lp:percona-server/release-5.1.49-12 as of September 3, 2010	15 years ago
unknown	0c6afe17dc	updated with changes from Percona-Server-5.1.47-11.2	15 years ago
Vasil Dimov	410e23a6af	Move everything into a subdirectory in order to circumvent a bzr merge bug.	16 years ago
Vasil Dimov	3d4ef17d6a	Move everything into a subdirectory in order to circumvent a bzr merge bug.	16 years ago
Vasil Dimov	d587bd4b15	Move everything into a subdirectory xyz/	16 years ago
Vasil Dimov	167b68fecb	Move everything into a subdirectory xyz/	16 years ago
Vasil Dimov	5107604b02	Move everything into a subdir in order to workaround a bzr merge bug: https://bugs.launchpad.net/bzr/+bug/375898	16 years ago
Vasil Dimov	c75d70fdc4	Move everything into a subdir in order to workaround a bzr merge bug: https://bugs.launchpad.net/bzr/+bug/375898	16 years ago
marko	227df33ed6	branches/innodb+: Merge revisions 6560:6773 from branches/zip: ------------------------------------------------------------------------ r6560 \| sunny \| 2010-02-04 16:11:23 +0200 (Thu, 04 Feb 2010) \| 7 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: Remove the additional check introduced in r6534 which tries to check if the joining transaction has any other transactions waiting on its locks. This optimization results in excessive deadlocks when running Sysbench with a large number of threads. The function seems to return FALSE positives. rb://250 ------------------------------------------------------------------------ r6591 \| marko \| 2010-02-08 10:06:39 +0200 (Mon, 08 Feb 2010) \| 3 lines Changed paths: M /branches/zip/row/row0merge.c branches/zip: row_merge_drop_index(): Remove redundant condition on SYS_INDEXES.TABLE_ID. INDEX_ID must be instance-widely unique, because SYS_FIELDS is not indexed by TABLE_ID. ------------------------------------------------------------------------ r6594 \| marko \| 2010-02-08 12:55:04 +0200 (Mon, 08 Feb 2010) \| 2 lines Changed paths: M /branches/zip/rem/rem0rec.c branches/zip: rec_get_nth_field_offs_old(): Replace if (!cond) ut_error; tests with ut_a(cond). ------------------------------------------------------------------------ r6595 \| marko \| 2010-02-08 13:53:02 +0200 (Mon, 08 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/btr0pcur.h M /branches/zip/include/btr0pcur.ic branches/zip: btr_pcur_commit(): Unused function, remove. ------------------------------------------------------------------------ r6608 \| marko \| 2010-02-09 11:02:37 +0200 (Tue, 09 Feb 2010) \| 1 line Changed paths: M /branches/zip/handler/handler0alter.cc branches/zip: ha_innobase::add_index(): Check for !innodb_table. ------------------------------------------------------------------------ r6609 \| marko \| 2010-02-09 13:45:40 +0200 (Tue, 09 Feb 2010) \| 1 line Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_field_print_low(): Add const qualifier. ------------------------------------------------------------------------ r6610 \| marko \| 2010-02-09 13:53:59 +0200 (Tue, 09 Feb 2010) \| 17 lines Changed paths: M /branches/zip/dict/dict0boot.c M /branches/zip/include/dict0boot.h M /branches/zip/row/row0merge.c M /branches/zip/row/row0mysql.c branches/zip: When dropping temporary indexes and tables at startup, first load them to the data dictionary cache and use the normal routines for dropping tables or indexes. This should reduce the risk of bugs and also make the code compatible with the upcoming TablespaceDictionary implementation. DICT_SYS_INDEXES_NAME_FIELD: The clustered index position of SYS_INDEXES.NAME. row_merge_drop_temp_indexes(): Scan SYS_INDEXES for tables containing temporary indexes, and load the tables as needed. Invoke row_merge_drop_index() to drop the indexes. row_mysql_drop_temp_tables(): Scan SYS_TABLES for temporary tables, load them with dict_load_table() and drop them with row_drop_table_for_mysql(). rb://251, not yet reviewed ------------------------------------------------------------------------ r6611 \| marko \| 2010-02-09 14:28:25 +0200 (Tue, 09 Feb 2010) \| 11 lines Changed paths: M /branches/zip/include/log0recv.h M /branches/zip/log/log0recv.c M /branches/zip/srv/srv0start.c branches/zip: Roll back dictionary transaction(s) before scanning .ibd files innobase_start_or_create_for_mysql(): Roll back data dictionary transactions before scanning the .ibd files. Then, data dictionary records can be loaded to the cache before opening the .ibd files. recv_recovery_rollback_active(): Refactored from recv_recovery_from_checkpoint_finish(). rb://235, committing without review, because this is needed for TablespaceDictionary. ------------------------------------------------------------------------ r6612 \| marko \| 2010-02-09 14:32:39 +0200 (Tue, 09 Feb 2010) \| 3 lines Changed paths: M /branches/zip/log/log0recv.c branches/zip: recv_recovery_rollback_active(): Drop the temporary tables and indexes after enabling sync order checks. This should not make any difference. This could have been done in r6611. ------------------------------------------------------------------------ r6614 \| inaam \| 2010-02-09 20:26:23 +0200 (Tue, 09 Feb 2010) \| 7 lines Changed paths: M /branches/zip/srv/srv0srv.c branches/plugin rb://242 Let the master thread sleep if the amount of work to be done is calibrated as taking less than a second. Approved by: Heikki ------------------------------------------------------------------------ r6631 \| marko \| 2010-02-10 09:19:52 +0200 (Wed, 10 Feb 2010) \| 1 line Changed paths: M /branches/zip/ChangeLog branches/zip: Document r6614 in ChangeLog. ------------------------------------------------------------------------ r6633 \| marko \| 2010-02-10 10:40:55 +0200 (Wed, 10 Feb 2010) \| 31 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/buf/buf0buf.c M /branches/zip/lock/lock0lock.c branches/zip: Merge revisions 6538:6613 from branches/5.1: ------------------------------------------------------------------------ r6545 \| jyang \| 2010-02-03 03:57:32 +0200 (Wed, 03 Feb 2010) \| 8 lines Changed paths: M /branches/5.1/lock/lock0lock.c branches/5.1: Fix bug #49001, "SHOW INNODB STATUS deadlock info incorrect when deadlock detection aborts". Print the correct lock owner when recursive function lock_deadlock_recursive() exceeds its maximum depth LOCK_MAX_DEPTH_IN_DEADLOCK_CHECK. rb://217, approved by Marko. ------------------------------------------------------------------------ r6613 \| inaam \| 2010-02-09 20:23:09 +0200 (Tue, 09 Feb 2010) \| 11 lines Changed paths: M /branches/5.1/buf/buf0buf.c M /branches/5.1/buf/buf0rea.c M /branches/5.1/include/buf0rea.h branches/5.1: Fix Bug #38901 InnoDB logs error repeatedly when trying to load page into buffer pool In buf_page_get_gen() if we are unable to read a page (because of corruption or some other reason) we keep on retrying. This fills up error log with millions of entries in no time and we'd eventually run out of disk space. This patch limits the number of attempts that we make (currently set to 100) and after that we abort with a message. rb://241 Approved by: Heikki ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6635 \| marko \| 2010-02-10 11:07:05 +0200 (Wed, 10 Feb 2010) \| 4 lines Changed paths: M /branches/zip/row/row0sel.c branches/zip: Clean up after r6559. Now that btr_pcur_open_with_no_init() is a macro, do not mix preprocessor directives in the macro invocation, because it is implementation-defined whether that is going to work. ------------------------------------------------------------------------ r6639 \| marko \| 2010-02-10 13:11:04 +0200 (Wed, 10 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/trx0rseg.h M /branches/zip/trx/trx0rseg.c branches/zip: trx_rseg_create(): Unused function, remove. ------------------------------------------------------------------------ r6660 \| marko \| 2010-02-11 11:21:11 +0200 (Thu, 11 Feb 2010) \| 7 lines Changed paths: M /branches/zip/row/row0umod.c branches/zip: Clarify the rollback of INSERT by UPDATE of delete-marked rec. row_undo_mod_remove_clust_low(): Augment the function comment. row_undo_mod_remove_clust_low(), row_undo_mod_del_mark_or_remove_sec_low(), row_undo_mod_del_mark_or_remove_sec(), row_undo_mod_upd_del_sec(): Add ut_ad(node->rec_type == TRX_UNDO_UPD_DEL_REC); ------------------------------------------------------------------------ r6672 \| marko \| 2010-02-11 13:01:18 +0200 (Thu, 11 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/que0que.h M /branches/zip/include/que0que.ic M /branches/zip/row/row0umod.c branches/zip: Introduce thr_is_recv(). ------------------------------------------------------------------------ r6673 \| marko \| 2010-02-11 13:09:48 +0200 (Thu, 11 Feb 2010) \| 9 lines Changed paths: M /branches/zip/btr/btr0cur.c M /branches/zip/include/trx0types.h M /branches/zip/row/row0umod.c branches/zip: Relax a debug assertion about a missing BLOB. (Issue #452) When rolling back an incomplete transaction in purge, tolerate missing BLOBs also in update undo, when undoing an INSERT by updating a delete-marked record, and the delete-marked record is no longer needed. Previously, we only tolerated missing BLOBs in insert undo. This merely fixes a debug assertion; the code performed correctly without UNIV_DEBUG. rb://249 approved by Sunny Bains. ------------------------------------------------------------------------ r6674 \| inaam \| 2010-02-11 17:54:44 +0200 (Thu, 11 Feb 2010) \| 16 lines Changed paths: M /branches/zip/include/mem0mem.h M /branches/zip/include/mem0mem.ic M /branches/zip/mem/mem0mem.c branches/zip bug# 49535 This is a backport of r4924. mem_heap_get_size() scans all allocated blocks to calculate the total size of the heap. This patch introduces a new, total_size, field in mem_block_info_struct. This field is valid only for base block (i.e.: the first block allocated for the heap) and is set to ULINT_UNDEFINED in other blocks. This considerably improves the performance of redo scan during recovery. rb://108 issue#216 Approved by: Heikki ------------------------------------------------------------------------ r6675 \| marko \| 2010-02-11 22:41:11 +0200 (Thu, 11 Feb 2010) \| 1 line Changed paths: M /branches/zip/row/row0umod.c branches/zip: Remove bogus debug assertions introduced in r6660. ------------------------------------------------------------------------ r6707 \| inaam \| 2010-02-12 19:22:35 +0200 (Fri, 12 Feb 2010) \| 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip ChangeLog entry for r6674. ------------------------------------------------------------------------ r6712 \| marko \| 2010-02-16 10:05:36 +0200 (Tue, 16 Feb 2010) \| 2 lines Changed paths: M /branches/zip/trx/trx0trx.c branches/zip: trx_lists_init_at_db_start(): Assert that the kernel_mutex is held by the caller. ------------------------------------------------------------------------ r6713 \| sunny \| 2010-02-16 10:12:17 +0200 (Tue, 16 Feb 2010) \| 7 lines Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Change the bit fields back to ulint. Bit fields were causing problems with concurrency on SMP systems because of word packing issues. The number of trx_t's in a system is not sufficient enough to require that we try and save a few bytes in the data structure. See rb://255 for details. ------------------------------------------------------------------------ r6714 \| sunny \| 2010-02-16 10:12:25 +0200 (Tue, 16 Feb 2010) \| 2 lines Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Update the comments and fix the whitespace issues. See rb://255 Approved by: Marko ------------------------------------------------------------------------ r6715 \| sunny \| 2010-02-16 10:14:21 +0200 (Tue, 16 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Fix comment. Non functional change. ------------------------------------------------------------------------ r6717 \| marko \| 2010-02-16 14:53:20 +0200 (Tue, 16 Feb 2010) \| 2 lines Changed paths: M /branches/zip/include/log0log.ic branches/zip: log_reserve_and_write_fast(): Correct a race condition in UNIV_LOG_LSN_DEBUG. This could have caused Issue #440. ------------------------------------------------------------------------ r6718 \| marko \| 2010-02-16 15:06:16 +0200 (Tue, 16 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Fix a comment. ------------------------------------------------------------------------ r6723 \| marko \| 2010-02-17 11:48:34 +0200 (Wed, 17 Feb 2010) \| 3 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: lock_table_other_has_incompatible(): Return an incompatible lock or NULL instead of TRUE or FALSE. Approved by Sunny over IM. ------------------------------------------------------------------------ r6724 \| marko \| 2010-02-17 15:52:05 +0200 (Wed, 17 Feb 2010) \| 11 lines Changed paths: M /branches/zip/os/os0file.c branches/zip: Merge revisions 6613:6669 from branches/5.1: ------------------------------------------------------------------------ r6669 \| jyang \| 2010-02-11 12:24:19 +0200 (Thu, 11 Feb 2010) \| 7 lines branches/5.1: Fix bug #50691, AIX implementation of readdir_r causes InnoDB errors. readdir_r() returns an non-NULL value in the case of reaching the end of a directory. It should not be treated as an error return. rb://238 approved by Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6726 \| marko \| 2010-02-17 18:49:21 +0200 (Wed, 17 Feb 2010) \| 3 lines Changed paths: M /branches/zip/include/fil0fil.h branches/zip: FIL_PAGE_FILE_FLUSH_LSN: Note that the field is only valid for the first page of each ibdata file, not .ibd files. Suggested by Heikki, in connection with the LSN warning noted in Issue #341. ------------------------------------------------------------------------ r6727 \| marko \| 2010-02-17 18:50:20 +0200 (Wed, 17 Feb 2010) \| 2 lines Changed paths: M /branches/zip/fsp/fsp0fsp.c branches/zip: fsp_init_file_page_low(): Declare the page uninitialized for Valgrind. ------------------------------------------------------------------------ r6728 \| marko \| 2010-02-17 18:54:04 +0200 (Wed, 17 Feb 2010) \| 3 lines Changed paths: M /branches/zip/fsp/fsp0fsp.c M /branches/zip/include/univ.i branches/zip: Remove UNIV_BASIC_LOG_DEBUG. This fixes the FILE_FLUSH_LSN printouts mentioned in Issue #341. Suggested by Heikki. ------------------------------------------------------------------------ r6740 \| sunny \| 2010-02-18 13:44:31 +0200 (Thu, 18 Feb 2010) \| 6 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: Don't print the entire lock bit set if the block was not found in the buffer pool. Only print the bits that are set and that information is in the lock and not in the block. See rb://256 approved by Marko. ------------------------------------------------------------------------ r6749 \| vasil \| 2010-02-20 18:45:41 +0200 (Sat, 20 Feb 2010) \| 5 lines Changed paths: M /branches/embedded-1.0/btr/btr0btr.c M /branches/embedded-1.0/btr/btr0cur.c M /branches/embedded-1.0/btr/btr0pcur.c M /branches/embedded-1.0/buf/buf0buf.c M /branches/embedded-1.0/buf/buf0flu.c M /branches/embedded-1.0/buf/buf0lru.c M /branches/embedded-1.0/dict/dict0boot.c M /branches/embedded-1.0/dict/dict0crea.c M /branches/embedded-1.0/dict/dict0dict.c M /branches/embedded-1.0/dict/dict0load.c M /branches/embedded-1.0/fil/fil0fil.c M /branches/embedded-1.0/fsp/fsp0fsp.c M /branches/embedded-1.0/ibuf/ibuf0ibuf.c M /branches/embedded-1.0/include/btr0btr.h M /branches/embedded-1.0/include/btr0cur.h M /branches/embedded-1.0/include/btr0pcur.h M /branches/embedded-1.0/include/btr0pcur.ic M /branches/embedded-1.0/include/buf0buf.h M /branches/embedded-1.0/include/buf0buf.ic M /branches/embedded-1.0/include/dict0boot.h M /branches/embedded-1.0/include/fil0fil.h M /branches/embedded-1.0/include/lock0lock.h M /branches/embedded-1.0/include/log0log.h M /branches/embedded-1.0/include/log0log.ic M /branches/embedded-1.0/include/log0recv.h M /branches/embedded-1.0/include/mem0dbg.h M /branches/embedded-1.0/include/mem0dbg.ic M /branches/embedded-1.0/include/mem0mem.h M /branches/embedded-1.0/include/mem0mem.ic M /branches/embedded-1.0/include/os0file.h M /branches/embedded-1.0/include/os0sync.h M /branches/embedded-1.0/include/os0sync.ic M /branches/embedded-1.0/include/os0thread.h M /branches/embedded-1.0/include/que0que.h M /branches/embedded-1.0/include/que0que.ic M /branches/embedded-1.0/include/row0merge.h M /branches/embedded-1.0/include/row0prebuilt.h M /branches/embedded-1.0/include/srv0srv.h M /branches/embedded-1.0/include/sync0sync.h M /branches/embedded-1.0/include/trx0rseg.h M /branches/embedded-1.0/include/trx0sys.h M /branches/embedded-1.0/include/trx0trx.h M /branches/embedded-1.0/include/trx0types.h M /branches/embedded-1.0/include/trx0undo.h M /branches/embedded-1.0/include/trx0xa.h M /branches/embedded-1.0/include/univ.i M /branches/embedded-1.0/include/ut0vec.h M /branches/embedded-1.0/include/ut0vec.ic M /branches/embedded-1.0/lock/lock0lock.c M /branches/embedded-1.0/log/log0log.c M /branches/embedded-1.0/log/log0recv.c M /branches/embedded-1.0/mem/mem0mem.c M /branches/embedded-1.0/os/os0file.c M /branches/embedded-1.0/os/os0thread.c M /branches/embedded-1.0/page/page0page.c M /branches/embedded-1.0/rem/rem0rec.c M /branches/embedded-1.0/row/row0ins.c M /branches/embedded-1.0/row/row0merge.c M /branches/embedded-1.0/row/row0prebuilt.c M /branches/embedded-1.0/row/row0sel.c M /branches/embedded-1.0/row/row0umod.c M /branches/embedded-1.0/row/row0undo.c M /branches/embedded-1.0/row/row0upd.c M /branches/embedded-1.0/srv/srv0srv.c M /branches/embedded-1.0/srv/srv0start.c M /branches/embedded-1.0/sync/sync0sync.c M /branches/embedded-1.0/trx/trx0sys.c M /branches/embedded-1.0/trx/trx0trx.c M /branches/embedded-1.0/trx/trx0undo.c M /branches/embedded-1.0/ut/ut0mem.c M /branches/innodb+/btr/btr0btr.c M /branches/innodb+/btr/btr0cur.c M /branches/innodb+/btr/btr0pcur.c M /branches/innodb+/buf/buf0buf.c M /branches/innodb+/buf/buf0lru.c M /branches/innodb+/dict/dict0crea.c M /branches/innodb+/dict/dict0dict.c M /branches/innodb+/dict/dict0load.c M /branches/innodb+/handler/ha_innodb.cc M /branches/innodb+/handler/ha_innodb.h M /branches/innodb+/handler/handler0alter.cc M /branches/innodb+/include/btr0btr.h M /branches/innodb+/include/btr0cur.h M /branches/innodb+/include/btr0pcur.h M /branches/innodb+/include/btr0pcur.ic M /branches/innodb+/include/buf0buf.h M /branches/innodb+/include/log0log.h M /branches/innodb+/include/mem0dbg.h M /branches/innodb+/include/mem0dbg.ic M /branches/innodb+/include/os0file.h M /branches/innodb+/include/row0mysql.h M /branches/innodb+/include/srv0srv.h M /branches/innodb+/include/sync0sync.h M /branches/innodb+/include/trx0trx.h M /branches/innodb+/lock/lock0lock.c M /branches/innodb+/log/log0log.c M /branches/innodb+/log/log0recv.c M /branches/innodb+/mem/mem0dbg.c M /branches/innodb+/os/os0file.c M /branches/innodb+/page/page0page.c M /branches/innodb+/row/row0ins.c M /branches/innodb+/row/row0mysql.c M /branches/innodb+/row/row0sel.c M /branches/innodb+/srv/srv0srv.c M /branches/innodb+/srv/srv0start.c M /branches/innodb+/sync/sync0sync.c M /branches/innodb+_metrics_table/btr/btr0btr.c M /branches/innodb+_metrics_table/buf/buf0buf.c M /branches/innodb+_metrics_table/buf/buf0flu.c M /branches/innodb+_metrics_table/dict/dict0crea.c M /branches/innodb+_metrics_table/dict/dict0dict.c M /branches/innodb+_metrics_table/dict/dict0load.c M /branches/innodb+_metrics_table/handler/ha_innodb.cc M /branches/innodb+_metrics_table/handler/ha_innodb.h M /branches/innodb+_metrics_table/handler/handler0alter.cc M /branches/innodb+_metrics_table/handler/i_s.cc M /branches/innodb+_metrics_table/handler/i_s.h M /branches/innodb+_metrics_table/include/mem0dbg.h M /branches/innodb+_metrics_table/include/mem0dbg.ic M /branches/innodb+_metrics_table/include/srv0mon.h M /branches/innodb+_metrics_table/include/srv0mon.ic M /branches/innodb+_metrics_table/include/srv0srv.h M /branches/innodb+_metrics_table/lock/lock0lock.c M /branches/innodb+_metrics_table/log/log0log.c M /branches/innodb+_metrics_table/mem/mem0dbg.c M /branches/innodb+_metrics_table/os/os0file.c M /branches/innodb+_metrics_table/page/page0zip.c M /branches/innodb+_metrics_table/row/row0mysql.c M /branches/innodb+_metrics_table/row/row0purge.c M /branches/innodb+_metrics_table/row/row0sel.c M /branches/innodb+_metrics_table/srv/srv0mon.c M /branches/innodb+_metrics_table/srv/srv0srv.c M /branches/innodb+_metrics_table/sync/sync0sync.c M /branches/innodb+_metrics_table/trx/trx0roll.c M /branches/innodb+_metrics_table/trx/trx0trx.c M /branches/innodb+_persistent_stats/btr/btr0btr.c M /branches/innodb+_persistent_stats/buf/buf0buf.c M /branches/innodb+_persistent_stats/data/data0type.c M /branches/innodb+_persistent_stats/dict/dict0boot.c M /branches/innodb+_persistent_stats/dict/dict0crea.c M /branches/innodb+_persistent_stats/dict/dict0dict.c M /branches/innodb+_persistent_stats/dict/dict0load.c M /branches/innodb+_persistent_stats/dict/dict0mem.c M /branches/innodb+_persistent_stats/fil/fil0fil.c M /branches/innodb+_persistent_stats/fsp/fsp0fsp.c M /branches/innodb+_persistent_stats/handler/ha_innodb.cc M /branches/innodb+_persistent_stats/handler/ha_innodb.h M /branches/innodb+_persistent_stats/handler/handler0alter.cc M /branches/innodb+_persistent_stats/ibuf/ibuf0ibuf.c M /branches/innodb+_persistent_stats/include/btr0pcur.h M /branches/innodb+_persistent_stats/include/btr0pcur.ic M /branches/innodb+_persistent_stats/include/db0err.h M /branches/innodb+_persistent_stats/include/dict0dict.h M /branches/innodb+_persistent_stats/include/dict0mem.h M /branches/innodb+_persistent_stats/include/ha_prototypes.h M /branches/innodb+_persistent_stats/include/lock0lock.h M /branches/innodb+_persistent_stats/include/log0log.h M /branches/innodb+_persistent_stats/include/log0recv.h M /branches/innodb+_persistent_stats/include/mem0dbg.h M /branches/innodb+_persistent_stats/include/mem0dbg.ic M /branches/innodb+_persistent_stats/include/os0file.h M /branches/innodb+_persistent_stats/include/pars0pars.h M /branches/innodb+_persistent_stats/include/srv0srv.h M /branches/innodb+_persistent_stats/include/sync0sync.h M /branches/innodb+_persistent_stats/include/trx0sys.h M /branches/innodb+_persistent_stats/include/trx0trx.h M /branches/innodb+_persistent_stats/include/ut0lst.h M /branches/innodb+_persistent_stats/include/ut0ut.h M /branches/innodb+_persistent_stats/lock/lock0lock.c M /branches/innodb+_persistent_stats/log/log0log.c M /branches/innodb+_persistent_stats/log/log0recv.c M /branches/innodb+_persistent_stats/mem/mem0dbg.c M /branches/innodb+_persistent_stats/os/os0file.c M /branches/innodb+_persistent_stats/page/page0page.c M /branches/innodb+_persistent_stats/pars/pars0pars.c M /branches/innodb+_persistent_stats/row/row0merge.c M /branches/innodb+_persistent_stats/row/row0mysql.c M /branches/innodb+_persistent_stats/row/row0sel.c M /branches/innodb+_persistent_stats/row/row0umod.c M /branches/innodb+_persistent_stats/row/row0upd.c M /branches/innodb+_persistent_stats/srv/srv0srv.c M /branches/innodb+_persistent_stats/srv/srv0start.c M /branches/innodb+_persistent_stats/sync/sync0sync.c M /branches/innodb+_persistent_stats/trx/trx0i_s.c M /branches/innodb+_persistent_stats/trx/trx0sys.c M /branches/innodb+_persistent_stats/trx/trx0trx.c M /branches/innodb+_persistent_stats/ut/ut0ut.c M /branches/innofts+/handler/ha_innodb.cc M /branches/innofts+/handler/i_s.cc M /branches/innofts+/handler/i_s.h M /branches/innofts+/include/fut0fut.h M /branches/performance_schema/btr/btr0sea.c M /branches/performance_schema/buf/buf0buf.c M /branches/performance_schema/dict/dict0dict.c M /branches/performance_schema/fil/fil0fil.c M /branches/performance_schema/handler/ha_innodb.cc M /branches/performance_schema/include/srv0srv.h M /branches/performance_schema/include/sync0rw.h M /branches/performance_schema/include/sync0rw.ic M /branches/performance_schema/include/sync0sync.h M /branches/performance_schema/include/sync0sync.ic M /branches/performance_schema/include/sync0types.h M /branches/performance_schema/log/log0log.c M /branches/performance_schema/srv/srv0srv.c M /branches/performance_schema/sync/sync0rw.c M /branches/performance_schema/trx/trx0i_s.c M /branches/performance_schema/trx/trx0purge.c M /branches/plugin-2.0/buf/buf0buf.c M /branches/plugin-2.0/buf/buf0lru.c M /branches/plugin-2.0/dict/dict0boot.c M /branches/plugin-2.0/dict/dict0crea.c M /branches/plugin-2.0/dict/dict0dict.c M /branches/plugin-2.0/dict/dict0load.c M /branches/plugin-2.0/dict/dict0mem.c M /branches/plugin-2.0/fil/fil0fil.c M /branches/plugin-2.0/fsp/fsp0fsp.c M /branches/plugin-2.0/handler/ha_innodb.cc M /branches/plugin-2.0/handler/ha_innodb.h M /branches/plugin-2.0/handler/handler0alter.cc M /branches/plugin-2.0/ibuf/ibuf0ibuf.c M /branches/plugin-2.0/include/dict0mem.h M /branches/plugin-2.0/include/ha_prototypes.h M /branches/plugin-2.0/include/lock0lock.h M /branches/plugin-2.0/include/log0log.h M /branches/plugin-2.0/include/log0recv.h M /branches/plugin-2.0/include/mem0dbg.h M /branches/plugin-2.0/include/mem0dbg.ic M /branches/plugin-2.0/include/os0file.h M /branches/plugin-2.0/include/row0mysql.h M /branches/plugin-2.0/include/srv0srv.h M /branches/plugin-2.0/include/sync0sync.h M /branches/plugin-2.0/include/trx0sys.h M /branches/plugin-2.0/include/trx0trx.h M /branches/plugin-2.0/lock/lock0lock.c M /branches/plugin-2.0/log/log0log.c M /branches/plugin-2.0/log/log0recv.c M /branches/plugin-2.0/mem/mem0dbg.c M /branches/plugin-2.0/os/os0file.c M /branches/plugin-2.0/page/page0page.c M /branches/plugin-2.0/row/row0merge.c M /branches/plugin-2.0/row/row0mysql.c M /branches/plugin-2.0/row/row0sel.c M /branches/plugin-2.0/row/row0umod.c M /branches/plugin-2.0/row/row0upd.c M /branches/plugin-2.0/srv/srv0srv.c M /branches/plugin-2.0/srv/srv0start.c M /branches/plugin-2.0/sync/sync0sync.c M /branches/plugin-2.0/trx/trx0i_s.c M /branches/plugin-2.0/trx/trx0sys.c M /branches/plugin-2.0/trx/trx0trx.c M /branches/zip/btr/btr0btr.c M /branches/zip/btr/btr0cur.c M /branches/zip/btr/btr0pcur.c M /branches/zip/buf/buf0buf.c M /branches/zip/buf/buf0lru.c M /branches/zip/dict/dict0boot.c M /branches/zip/dict/dict0crea.c M /branches/zip/dict/dict0dict.c M /branches/zip/dict/dict0load.c M /branches/zip/fsp/fsp0fsp.c M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h M /branches/zip/handler/handler0alter.cc M /branches/zip/include/btr0btr.h M /branches/zip/include/btr0cur.h M /branches/zip/include/btr0pcur.h M /branches/zip/include/btr0pcur.ic M /branches/zip/include/buf0buf.h M /branches/zip/include/dict0boot.h M /branches/zip/include/fil0fil.h M /branches/zip/include/log0log.h M /branches/zip/include/log0log.ic M /branches/zip/include/log0recv.h M /branches/zip/include/mem0dbg.h M /branches/zip/include/mem0dbg.ic M /branches/zip/include/mem0mem.h M /branches/zip/include/mem0mem.ic M /branches/zip/include/os0file.h M /branches/zip/include/que0que.h M /branches/zip/include/que0que.ic M /branches/zip/include/row0mysql.h M /branches/zip/include/srv0srv.h M /branches/zip/include/sync0sync.h M /branches/zip/include/trx0rseg.h M /branches/zip/include/trx0trx.h M /branches/zip/include/trx0types.h M /branches/zip/include/univ.i M /branches/zip/lock/lock0lock.c M /branches/zip/log/log0log.c M /branches/zip/log/log0recv.c M /branches/zip/mem/mem0dbg.c M /branches/zip/mem/mem0mem.c M /branches/zip/os/os0file.c M /branches/zip/page/page0page.c M /branches/zip/rem/rem0rec.c M /branches/zip/row/row0ins.c M /branches/zip/row/row0merge.c M /branches/zip/row/row0mysql.c M /branches/zip/row/row0sel.c M /branches/zip/row/row0umod.c M /branches/zip/srv/srv0srv.c M /branches/zip/srv/srv0start.c M /branches/zip/sync/sync0sync.c M /branches/zip/trx/trx0rseg.c M /branches/zip/trx/trx0trx.c Non-functional change: update copyright year to 2010 of the files that have been modified after 2010-01-01 according to svn. for f in $(svn log -v -r{2010-01-01}:HEAD \|grep "^ M " \|cut -b 16- \|sort -u) ; do sed -i "" -E 's/(Copyright $c$ [0-9]{4},) [0-9]{4}, (.Innobase Oy.+All Rights Reserved)/\1 2010, \2/' $f ; done ------------------------------------------------------------------------ r6750 \| marko \| 2010-02-22 08:57:23 +0200 (Mon, 22 Feb 2010) \| 2 lines Changed paths: M /branches/zip/include/row0sel.h M /branches/zip/row/row0sel.c branches/zip: row_fetch_store_uint4(): Remove unused function. This was added to trunk in r435. ------------------------------------------------------------------------ r6754 \| marko \| 2010-02-24 10:56:43 +0200 (Wed, 24 Feb 2010) \| 17 lines Changed paths: M /branches/zip/row/row0merge.c branches/zip: Allocate the merge sort buffers from a heap, not stack. The merge sort can use up to 48KiB of buffers when merging blocks. That can cause a stack overflow, especially on 64-bit systems when not building with inlined functions. This was reported as Issue #462. row_merge_dup_report(): Allocate buf and offsets from a heap. row_merge_heap_create(): Allocate space for buf[3] too. Fix bogus sizeof arithmetics that happened to work, because sizeof(ulint)==sizeof(void*). row_merge_blocks(), row_merge_blocks_copy(): Allocate buf[3] from heap. row_merge_insert_index_tuples(): Allocate buf from graph_heap. rb://258 approved and tested by Sunny Bains ------------------------------------------------------------------------ r6767 \| calvin \| 2010-03-01 18:16:10 +0200 (Mon, 01 Mar 2010) \| 3 lines Changed paths: M /branches/zip/srv/srv0srv.c branches/zip: fix bug#51587 Non-functional change. ------------------------------------------------------------------------ r6768 \| vasil \| 2010-03-02 18:20:48 +0200 (Tue, 02 Mar 2010) \| 5 lines Changed paths: M /branches/zip/include/btr0btr.h M /branches/zip/include/btr0btr.ic branches/zip: Add a NOTE to the comment of btr_node_ptr_get_child_page_no() to prevent mysterious bugs. ------------------------------------------------------------------------ r6770 \| marko \| 2010-03-03 12:52:55 +0200 (Wed, 03 Mar 2010) \| 12 lines Changed paths: M /branches/zip/handler/handler0alter.cc M /branches/zip/mysql-test/innodb-index.result M /branches/zip/mysql-test/innodb-index.test M /branches/zip/mysql-test/innodb.result M /branches/zip/mysql-test/innodb.test branches/zip: Disallow duplicate index name when creating an index. This should fix Mantis Issue #461. innodb.test, innodb.result, innodb-index.test, innodb-index.result: Adjust the test result and mention that the introduced restriction has been reported as MySQL Bug #51451. innobase_check_index_keys(): Add a parameter for the InnoDB table and check that no duplicate index name is added. Report errors by my_error() instead of sql_print_error(). rb://260 approved by Sunny Bains ------------------------------------------------------------------------ r6771 \| marko \| 2010-03-03 14:52:43 +0200 (Wed, 03 Mar 2010) \| 1 line Changed paths: M /branches/zip/ChangeLog Document r6770. ------------------------------------------------------------------------ r6773 \| marko \| 2010-03-03 15:31:54 +0200 (Wed, 03 Mar 2010) \| 2 lines Changed paths: M /branches/zip/row/row0row.c branches/zip: row_raw_format(): Silence a GCC 4.4.2 warning of possibly uninitialized variable format_in_hex. ------------------------------------------------------------------------	16 years ago
marko	fb2ff6daf3	branches/innodb+: Merge revisions 6560:6773 from branches/zip: ------------------------------------------------------------------------ r6560 \| sunny \| 2010-02-04 16:11:23 +0200 (Thu, 04 Feb 2010) \| 7 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: Remove the additional check introduced in r6534 which tries to check if the joining transaction has any other transactions waiting on its locks. This optimization results in excessive deadlocks when running Sysbench with a large number of threads. The function seems to return FALSE positives. rb://250 ------------------------------------------------------------------------ r6591 \| marko \| 2010-02-08 10:06:39 +0200 (Mon, 08 Feb 2010) \| 3 lines Changed paths: M /branches/zip/row/row0merge.c branches/zip: row_merge_drop_index(): Remove redundant condition on SYS_INDEXES.TABLE_ID. INDEX_ID must be instance-widely unique, because SYS_FIELDS is not indexed by TABLE_ID. ------------------------------------------------------------------------ r6594 \| marko \| 2010-02-08 12:55:04 +0200 (Mon, 08 Feb 2010) \| 2 lines Changed paths: M /branches/zip/rem/rem0rec.c branches/zip: rec_get_nth_field_offs_old(): Replace if (!cond) ut_error; tests with ut_a(cond). ------------------------------------------------------------------------ r6595 \| marko \| 2010-02-08 13:53:02 +0200 (Mon, 08 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/btr0pcur.h M /branches/zip/include/btr0pcur.ic branches/zip: btr_pcur_commit(): Unused function, remove. ------------------------------------------------------------------------ r6608 \| marko \| 2010-02-09 11:02:37 +0200 (Tue, 09 Feb 2010) \| 1 line Changed paths: M /branches/zip/handler/handler0alter.cc branches/zip: ha_innobase::add_index(): Check for !innodb_table. ------------------------------------------------------------------------ r6609 \| marko \| 2010-02-09 13:45:40 +0200 (Tue, 09 Feb 2010) \| 1 line Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_field_print_low(): Add const qualifier. ------------------------------------------------------------------------ r6610 \| marko \| 2010-02-09 13:53:59 +0200 (Tue, 09 Feb 2010) \| 17 lines Changed paths: M /branches/zip/dict/dict0boot.c M /branches/zip/include/dict0boot.h M /branches/zip/row/row0merge.c M /branches/zip/row/row0mysql.c branches/zip: When dropping temporary indexes and tables at startup, first load them to the data dictionary cache and use the normal routines for dropping tables or indexes. This should reduce the risk of bugs and also make the code compatible with the upcoming TablespaceDictionary implementation. DICT_SYS_INDEXES_NAME_FIELD: The clustered index position of SYS_INDEXES.NAME. row_merge_drop_temp_indexes(): Scan SYS_INDEXES for tables containing temporary indexes, and load the tables as needed. Invoke row_merge_drop_index() to drop the indexes. row_mysql_drop_temp_tables(): Scan SYS_TABLES for temporary tables, load them with dict_load_table() and drop them with row_drop_table_for_mysql(). rb://251, not yet reviewed ------------------------------------------------------------------------ r6611 \| marko \| 2010-02-09 14:28:25 +0200 (Tue, 09 Feb 2010) \| 11 lines Changed paths: M /branches/zip/include/log0recv.h M /branches/zip/log/log0recv.c M /branches/zip/srv/srv0start.c branches/zip: Roll back dictionary transaction(s) before scanning .ibd files innobase_start_or_create_for_mysql(): Roll back data dictionary transactions before scanning the .ibd files. Then, data dictionary records can be loaded to the cache before opening the .ibd files. recv_recovery_rollback_active(): Refactored from recv_recovery_from_checkpoint_finish(). rb://235, committing without review, because this is needed for TablespaceDictionary. ------------------------------------------------------------------------ r6612 \| marko \| 2010-02-09 14:32:39 +0200 (Tue, 09 Feb 2010) \| 3 lines Changed paths: M /branches/zip/log/log0recv.c branches/zip: recv_recovery_rollback_active(): Drop the temporary tables and indexes after enabling sync order checks. This should not make any difference. This could have been done in r6611. ------------------------------------------------------------------------ r6614 \| inaam \| 2010-02-09 20:26:23 +0200 (Tue, 09 Feb 2010) \| 7 lines Changed paths: M /branches/zip/srv/srv0srv.c branches/plugin rb://242 Let the master thread sleep if the amount of work to be done is calibrated as taking less than a second. Approved by: Heikki ------------------------------------------------------------------------ r6631 \| marko \| 2010-02-10 09:19:52 +0200 (Wed, 10 Feb 2010) \| 1 line Changed paths: M /branches/zip/ChangeLog branches/zip: Document r6614 in ChangeLog. ------------------------------------------------------------------------ r6633 \| marko \| 2010-02-10 10:40:55 +0200 (Wed, 10 Feb 2010) \| 31 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/buf/buf0buf.c M /branches/zip/lock/lock0lock.c branches/zip: Merge revisions 6538:6613 from branches/5.1: ------------------------------------------------------------------------ r6545 \| jyang \| 2010-02-03 03:57:32 +0200 (Wed, 03 Feb 2010) \| 8 lines Changed paths: M /branches/5.1/lock/lock0lock.c branches/5.1: Fix bug #49001, "SHOW INNODB STATUS deadlock info incorrect when deadlock detection aborts". Print the correct lock owner when recursive function lock_deadlock_recursive() exceeds its maximum depth LOCK_MAX_DEPTH_IN_DEADLOCK_CHECK. rb://217, approved by Marko. ------------------------------------------------------------------------ r6613 \| inaam \| 2010-02-09 20:23:09 +0200 (Tue, 09 Feb 2010) \| 11 lines Changed paths: M /branches/5.1/buf/buf0buf.c M /branches/5.1/buf/buf0rea.c M /branches/5.1/include/buf0rea.h branches/5.1: Fix Bug #38901 InnoDB logs error repeatedly when trying to load page into buffer pool In buf_page_get_gen() if we are unable to read a page (because of corruption or some other reason) we keep on retrying. This fills up error log with millions of entries in no time and we'd eventually run out of disk space. This patch limits the number of attempts that we make (currently set to 100) and after that we abort with a message. rb://241 Approved by: Heikki ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6635 \| marko \| 2010-02-10 11:07:05 +0200 (Wed, 10 Feb 2010) \| 4 lines Changed paths: M /branches/zip/row/row0sel.c branches/zip: Clean up after r6559. Now that btr_pcur_open_with_no_init() is a macro, do not mix preprocessor directives in the macro invocation, because it is implementation-defined whether that is going to work. ------------------------------------------------------------------------ r6639 \| marko \| 2010-02-10 13:11:04 +0200 (Wed, 10 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/trx0rseg.h M /branches/zip/trx/trx0rseg.c branches/zip: trx_rseg_create(): Unused function, remove. ------------------------------------------------------------------------ r6660 \| marko \| 2010-02-11 11:21:11 +0200 (Thu, 11 Feb 2010) \| 7 lines Changed paths: M /branches/zip/row/row0umod.c branches/zip: Clarify the rollback of INSERT by UPDATE of delete-marked rec. row_undo_mod_remove_clust_low(): Augment the function comment. row_undo_mod_remove_clust_low(), row_undo_mod_del_mark_or_remove_sec_low(), row_undo_mod_del_mark_or_remove_sec(), row_undo_mod_upd_del_sec(): Add ut_ad(node->rec_type == TRX_UNDO_UPD_DEL_REC); ------------------------------------------------------------------------ r6672 \| marko \| 2010-02-11 13:01:18 +0200 (Thu, 11 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/que0que.h M /branches/zip/include/que0que.ic M /branches/zip/row/row0umod.c branches/zip: Introduce thr_is_recv(). ------------------------------------------------------------------------ r6673 \| marko \| 2010-02-11 13:09:48 +0200 (Thu, 11 Feb 2010) \| 9 lines Changed paths: M /branches/zip/btr/btr0cur.c M /branches/zip/include/trx0types.h M /branches/zip/row/row0umod.c branches/zip: Relax a debug assertion about a missing BLOB. (Issue #452) When rolling back an incomplete transaction in purge, tolerate missing BLOBs also in update undo, when undoing an INSERT by updating a delete-marked record, and the delete-marked record is no longer needed. Previously, we only tolerated missing BLOBs in insert undo. This merely fixes a debug assertion; the code performed correctly without UNIV_DEBUG. rb://249 approved by Sunny Bains. ------------------------------------------------------------------------ r6674 \| inaam \| 2010-02-11 17:54:44 +0200 (Thu, 11 Feb 2010) \| 16 lines Changed paths: M /branches/zip/include/mem0mem.h M /branches/zip/include/mem0mem.ic M /branches/zip/mem/mem0mem.c branches/zip bug# 49535 This is a backport of r4924. mem_heap_get_size() scans all allocated blocks to calculate the total size of the heap. This patch introduces a new, total_size, field in mem_block_info_struct. This field is valid only for base block (i.e.: the first block allocated for the heap) and is set to ULINT_UNDEFINED in other blocks. This considerably improves the performance of redo scan during recovery. rb://108 issue#216 Approved by: Heikki ------------------------------------------------------------------------ r6675 \| marko \| 2010-02-11 22:41:11 +0200 (Thu, 11 Feb 2010) \| 1 line Changed paths: M /branches/zip/row/row0umod.c branches/zip: Remove bogus debug assertions introduced in r6660. ------------------------------------------------------------------------ r6707 \| inaam \| 2010-02-12 19:22:35 +0200 (Fri, 12 Feb 2010) \| 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip ChangeLog entry for r6674. ------------------------------------------------------------------------ r6712 \| marko \| 2010-02-16 10:05:36 +0200 (Tue, 16 Feb 2010) \| 2 lines Changed paths: M /branches/zip/trx/trx0trx.c branches/zip: trx_lists_init_at_db_start(): Assert that the kernel_mutex is held by the caller. ------------------------------------------------------------------------ r6713 \| sunny \| 2010-02-16 10:12:17 +0200 (Tue, 16 Feb 2010) \| 7 lines Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Change the bit fields back to ulint. Bit fields were causing problems with concurrency on SMP systems because of word packing issues. The number of trx_t's in a system is not sufficient enough to require that we try and save a few bytes in the data structure. See rb://255 for details. ------------------------------------------------------------------------ r6714 \| sunny \| 2010-02-16 10:12:25 +0200 (Tue, 16 Feb 2010) \| 2 lines Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Update the comments and fix the whitespace issues. See rb://255 Approved by: Marko ------------------------------------------------------------------------ r6715 \| sunny \| 2010-02-16 10:14:21 +0200 (Tue, 16 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Fix comment. Non functional change. ------------------------------------------------------------------------ r6717 \| marko \| 2010-02-16 14:53:20 +0200 (Tue, 16 Feb 2010) \| 2 lines Changed paths: M /branches/zip/include/log0log.ic branches/zip: log_reserve_and_write_fast(): Correct a race condition in UNIV_LOG_LSN_DEBUG. This could have caused Issue #440. ------------------------------------------------------------------------ r6718 \| marko \| 2010-02-16 15:06:16 +0200 (Tue, 16 Feb 2010) \| 1 line Changed paths: M /branches/zip/include/trx0trx.h branches/zip: Fix a comment. ------------------------------------------------------------------------ r6723 \| marko \| 2010-02-17 11:48:34 +0200 (Wed, 17 Feb 2010) \| 3 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: lock_table_other_has_incompatible(): Return an incompatible lock or NULL instead of TRUE or FALSE. Approved by Sunny over IM. ------------------------------------------------------------------------ r6724 \| marko \| 2010-02-17 15:52:05 +0200 (Wed, 17 Feb 2010) \| 11 lines Changed paths: M /branches/zip/os/os0file.c branches/zip: Merge revisions 6613:6669 from branches/5.1: ------------------------------------------------------------------------ r6669 \| jyang \| 2010-02-11 12:24:19 +0200 (Thu, 11 Feb 2010) \| 7 lines branches/5.1: Fix bug #50691, AIX implementation of readdir_r causes InnoDB errors. readdir_r() returns an non-NULL value in the case of reaching the end of a directory. It should not be treated as an error return. rb://238 approved by Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6726 \| marko \| 2010-02-17 18:49:21 +0200 (Wed, 17 Feb 2010) \| 3 lines Changed paths: M /branches/zip/include/fil0fil.h branches/zip: FIL_PAGE_FILE_FLUSH_LSN: Note that the field is only valid for the first page of each ibdata file, not .ibd files. Suggested by Heikki, in connection with the LSN warning noted in Issue #341. ------------------------------------------------------------------------ r6727 \| marko \| 2010-02-17 18:50:20 +0200 (Wed, 17 Feb 2010) \| 2 lines Changed paths: M /branches/zip/fsp/fsp0fsp.c branches/zip: fsp_init_file_page_low(): Declare the page uninitialized for Valgrind. ------------------------------------------------------------------------ r6728 \| marko \| 2010-02-17 18:54:04 +0200 (Wed, 17 Feb 2010) \| 3 lines Changed paths: M /branches/zip/fsp/fsp0fsp.c M /branches/zip/include/univ.i branches/zip: Remove UNIV_BASIC_LOG_DEBUG. This fixes the FILE_FLUSH_LSN printouts mentioned in Issue #341. Suggested by Heikki. ------------------------------------------------------------------------ r6740 \| sunny \| 2010-02-18 13:44:31 +0200 (Thu, 18 Feb 2010) \| 6 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: Don't print the entire lock bit set if the block was not found in the buffer pool. Only print the bits that are set and that information is in the lock and not in the block. See rb://256 approved by Marko. ------------------------------------------------------------------------ r6749 \| vasil \| 2010-02-20 18:45:41 +0200 (Sat, 20 Feb 2010) \| 5 lines Changed paths: M /branches/embedded-1.0/btr/btr0btr.c M /branches/embedded-1.0/btr/btr0cur.c M /branches/embedded-1.0/btr/btr0pcur.c M /branches/embedded-1.0/buf/buf0buf.c M /branches/embedded-1.0/buf/buf0flu.c M /branches/embedded-1.0/buf/buf0lru.c M /branches/embedded-1.0/dict/dict0boot.c M /branches/embedded-1.0/dict/dict0crea.c M /branches/embedded-1.0/dict/dict0dict.c M /branches/embedded-1.0/dict/dict0load.c M /branches/embedded-1.0/fil/fil0fil.c M /branches/embedded-1.0/fsp/fsp0fsp.c M /branches/embedded-1.0/ibuf/ibuf0ibuf.c M /branches/embedded-1.0/include/btr0btr.h M /branches/embedded-1.0/include/btr0cur.h M /branches/embedded-1.0/include/btr0pcur.h M /branches/embedded-1.0/include/btr0pcur.ic M /branches/embedded-1.0/include/buf0buf.h M /branches/embedded-1.0/include/buf0buf.ic M /branches/embedded-1.0/include/dict0boot.h M /branches/embedded-1.0/include/fil0fil.h M /branches/embedded-1.0/include/lock0lock.h M /branches/embedded-1.0/include/log0log.h M /branches/embedded-1.0/include/log0log.ic M /branches/embedded-1.0/include/log0recv.h M /branches/embedded-1.0/include/mem0dbg.h M /branches/embedded-1.0/include/mem0dbg.ic M /branches/embedded-1.0/include/mem0mem.h M /branches/embedded-1.0/include/mem0mem.ic M /branches/embedded-1.0/include/os0file.h M /branches/embedded-1.0/include/os0sync.h M /branches/embedded-1.0/include/os0sync.ic M /branches/embedded-1.0/include/os0thread.h M /branches/embedded-1.0/include/que0que.h M /branches/embedded-1.0/include/que0que.ic M /branches/embedded-1.0/include/row0merge.h M /branches/embedded-1.0/include/row0prebuilt.h M /branches/embedded-1.0/include/srv0srv.h M /branches/embedded-1.0/include/sync0sync.h M /branches/embedded-1.0/include/trx0rseg.h M /branches/embedded-1.0/include/trx0sys.h M /branches/embedded-1.0/include/trx0trx.h M /branches/embedded-1.0/include/trx0types.h M /branches/embedded-1.0/include/trx0undo.h M /branches/embedded-1.0/include/trx0xa.h M /branches/embedded-1.0/include/univ.i M /branches/embedded-1.0/include/ut0vec.h M /branches/embedded-1.0/include/ut0vec.ic M /branches/embedded-1.0/lock/lock0lock.c M /branches/embedded-1.0/log/log0log.c M /branches/embedded-1.0/log/log0recv.c M /branches/embedded-1.0/mem/mem0mem.c M /branches/embedded-1.0/os/os0file.c M /branches/embedded-1.0/os/os0thread.c M /branches/embedded-1.0/page/page0page.c M /branches/embedded-1.0/rem/rem0rec.c M /branches/embedded-1.0/row/row0ins.c M /branches/embedded-1.0/row/row0merge.c M /branches/embedded-1.0/row/row0prebuilt.c M /branches/embedded-1.0/row/row0sel.c M /branches/embedded-1.0/row/row0umod.c M /branches/embedded-1.0/row/row0undo.c M /branches/embedded-1.0/row/row0upd.c M /branches/embedded-1.0/srv/srv0srv.c M /branches/embedded-1.0/srv/srv0start.c M /branches/embedded-1.0/sync/sync0sync.c M /branches/embedded-1.0/trx/trx0sys.c M /branches/embedded-1.0/trx/trx0trx.c M /branches/embedded-1.0/trx/trx0undo.c M /branches/embedded-1.0/ut/ut0mem.c M /branches/innodb+/btr/btr0btr.c M /branches/innodb+/btr/btr0cur.c M /branches/innodb+/btr/btr0pcur.c M /branches/innodb+/buf/buf0buf.c M /branches/innodb+/buf/buf0lru.c M /branches/innodb+/dict/dict0crea.c M /branches/innodb+/dict/dict0dict.c M /branches/innodb+/dict/dict0load.c M /branches/innodb+/handler/ha_innodb.cc M /branches/innodb+/handler/ha_innodb.h M /branches/innodb+/handler/handler0alter.cc M /branches/innodb+/include/btr0btr.h M /branches/innodb+/include/btr0cur.h M /branches/innodb+/include/btr0pcur.h M /branches/innodb+/include/btr0pcur.ic M /branches/innodb+/include/buf0buf.h M /branches/innodb+/include/log0log.h M /branches/innodb+/include/mem0dbg.h M /branches/innodb+/include/mem0dbg.ic M /branches/innodb+/include/os0file.h M /branches/innodb+/include/row0mysql.h M /branches/innodb+/include/srv0srv.h M /branches/innodb+/include/sync0sync.h M /branches/innodb+/include/trx0trx.h M /branches/innodb+/lock/lock0lock.c M /branches/innodb+/log/log0log.c M /branches/innodb+/log/log0recv.c M /branches/innodb+/mem/mem0dbg.c M /branches/innodb+/os/os0file.c M /branches/innodb+/page/page0page.c M /branches/innodb+/row/row0ins.c M /branches/innodb+/row/row0mysql.c M /branches/innodb+/row/row0sel.c M /branches/innodb+/srv/srv0srv.c M /branches/innodb+/srv/srv0start.c M /branches/innodb+/sync/sync0sync.c M /branches/innodb+_metrics_table/btr/btr0btr.c M /branches/innodb+_metrics_table/buf/buf0buf.c M /branches/innodb+_metrics_table/buf/buf0flu.c M /branches/innodb+_metrics_table/dict/dict0crea.c M /branches/innodb+_metrics_table/dict/dict0dict.c M /branches/innodb+_metrics_table/dict/dict0load.c M /branches/innodb+_metrics_table/handler/ha_innodb.cc M /branches/innodb+_metrics_table/handler/ha_innodb.h M /branches/innodb+_metrics_table/handler/handler0alter.cc M /branches/innodb+_metrics_table/handler/i_s.cc M /branches/innodb+_metrics_table/handler/i_s.h M /branches/innodb+_metrics_table/include/mem0dbg.h M /branches/innodb+_metrics_table/include/mem0dbg.ic M /branches/innodb+_metrics_table/include/srv0mon.h M /branches/innodb+_metrics_table/include/srv0mon.ic M /branches/innodb+_metrics_table/include/srv0srv.h M /branches/innodb+_metrics_table/lock/lock0lock.c M /branches/innodb+_metrics_table/log/log0log.c M /branches/innodb+_metrics_table/mem/mem0dbg.c M /branches/innodb+_metrics_table/os/os0file.c M /branches/innodb+_metrics_table/page/page0zip.c M /branches/innodb+_metrics_table/row/row0mysql.c M /branches/innodb+_metrics_table/row/row0purge.c M /branches/innodb+_metrics_table/row/row0sel.c M /branches/innodb+_metrics_table/srv/srv0mon.c M /branches/innodb+_metrics_table/srv/srv0srv.c M /branches/innodb+_metrics_table/sync/sync0sync.c M /branches/innodb+_metrics_table/trx/trx0roll.c M /branches/innodb+_metrics_table/trx/trx0trx.c M /branches/innodb+_persistent_stats/btr/btr0btr.c M /branches/innodb+_persistent_stats/buf/buf0buf.c M /branches/innodb+_persistent_stats/data/data0type.c M /branches/innodb+_persistent_stats/dict/dict0boot.c M /branches/innodb+_persistent_stats/dict/dict0crea.c M /branches/innodb+_persistent_stats/dict/dict0dict.c M /branches/innodb+_persistent_stats/dict/dict0load.c M /branches/innodb+_persistent_stats/dict/dict0mem.c M /branches/innodb+_persistent_stats/fil/fil0fil.c M /branches/innodb+_persistent_stats/fsp/fsp0fsp.c M /branches/innodb+_persistent_stats/handler/ha_innodb.cc M /branches/innodb+_persistent_stats/handler/ha_innodb.h M /branches/innodb+_persistent_stats/handler/handler0alter.cc M /branches/innodb+_persistent_stats/ibuf/ibuf0ibuf.c M /branches/innodb+_persistent_stats/include/btr0pcur.h M /branches/innodb+_persistent_stats/include/btr0pcur.ic M /branches/innodb+_persistent_stats/include/db0err.h M /branches/innodb+_persistent_stats/include/dict0dict.h M /branches/innodb+_persistent_stats/include/dict0mem.h M /branches/innodb+_persistent_stats/include/ha_prototypes.h M /branches/innodb+_persistent_stats/include/lock0lock.h M /branches/innodb+_persistent_stats/include/log0log.h M /branches/innodb+_persistent_stats/include/log0recv.h M /branches/innodb+_persistent_stats/include/mem0dbg.h M /branches/innodb+_persistent_stats/include/mem0dbg.ic M /branches/innodb+_persistent_stats/include/os0file.h M /branches/innodb+_persistent_stats/include/pars0pars.h M /branches/innodb+_persistent_stats/include/srv0srv.h M /branches/innodb+_persistent_stats/include/sync0sync.h M /branches/innodb+_persistent_stats/include/trx0sys.h M /branches/innodb+_persistent_stats/include/trx0trx.h M /branches/innodb+_persistent_stats/include/ut0lst.h M /branches/innodb+_persistent_stats/include/ut0ut.h M /branches/innodb+_persistent_stats/lock/lock0lock.c M /branches/innodb+_persistent_stats/log/log0log.c M /branches/innodb+_persistent_stats/log/log0recv.c M /branches/innodb+_persistent_stats/mem/mem0dbg.c M /branches/innodb+_persistent_stats/os/os0file.c M /branches/innodb+_persistent_stats/page/page0page.c M /branches/innodb+_persistent_stats/pars/pars0pars.c M /branches/innodb+_persistent_stats/row/row0merge.c M /branches/innodb+_persistent_stats/row/row0mysql.c M /branches/innodb+_persistent_stats/row/row0sel.c M /branches/innodb+_persistent_stats/row/row0umod.c M /branches/innodb+_persistent_stats/row/row0upd.c M /branches/innodb+_persistent_stats/srv/srv0srv.c M /branches/innodb+_persistent_stats/srv/srv0start.c M /branches/innodb+_persistent_stats/sync/sync0sync.c M /branches/innodb+_persistent_stats/trx/trx0i_s.c M /branches/innodb+_persistent_stats/trx/trx0sys.c M /branches/innodb+_persistent_stats/trx/trx0trx.c M /branches/innodb+_persistent_stats/ut/ut0ut.c M /branches/innofts+/handler/ha_innodb.cc M /branches/innofts+/handler/i_s.cc M /branches/innofts+/handler/i_s.h M /branches/innofts+/include/fut0fut.h M /branches/performance_schema/btr/btr0sea.c M /branches/performance_schema/buf/buf0buf.c M /branches/performance_schema/dict/dict0dict.c M /branches/performance_schema/fil/fil0fil.c M /branches/performance_schema/handler/ha_innodb.cc M /branches/performance_schema/include/srv0srv.h M /branches/performance_schema/include/sync0rw.h M /branches/performance_schema/include/sync0rw.ic M /branches/performance_schema/include/sync0sync.h M /branches/performance_schema/include/sync0sync.ic M /branches/performance_schema/include/sync0types.h M /branches/performance_schema/log/log0log.c M /branches/performance_schema/srv/srv0srv.c M /branches/performance_schema/sync/sync0rw.c M /branches/performance_schema/trx/trx0i_s.c M /branches/performance_schema/trx/trx0purge.c M /branches/plugin-2.0/buf/buf0buf.c M /branches/plugin-2.0/buf/buf0lru.c M /branches/plugin-2.0/dict/dict0boot.c M /branches/plugin-2.0/dict/dict0crea.c M /branches/plugin-2.0/dict/dict0dict.c M /branches/plugin-2.0/dict/dict0load.c M /branches/plugin-2.0/dict/dict0mem.c M /branches/plugin-2.0/fil/fil0fil.c M /branches/plugin-2.0/fsp/fsp0fsp.c M /branches/plugin-2.0/handler/ha_innodb.cc M /branches/plugin-2.0/handler/ha_innodb.h M /branches/plugin-2.0/handler/handler0alter.cc M /branches/plugin-2.0/ibuf/ibuf0ibuf.c M /branches/plugin-2.0/include/dict0mem.h M /branches/plugin-2.0/include/ha_prototypes.h M /branches/plugin-2.0/include/lock0lock.h M /branches/plugin-2.0/include/log0log.h M /branches/plugin-2.0/include/log0recv.h M /branches/plugin-2.0/include/mem0dbg.h M /branches/plugin-2.0/include/mem0dbg.ic M /branches/plugin-2.0/include/os0file.h M /branches/plugin-2.0/include/row0mysql.h M /branches/plugin-2.0/include/srv0srv.h M /branches/plugin-2.0/include/sync0sync.h M /branches/plugin-2.0/include/trx0sys.h M /branches/plugin-2.0/include/trx0trx.h M /branches/plugin-2.0/lock/lock0lock.c M /branches/plugin-2.0/log/log0log.c M /branches/plugin-2.0/log/log0recv.c M /branches/plugin-2.0/mem/mem0dbg.c M /branches/plugin-2.0/os/os0file.c M /branches/plugin-2.0/page/page0page.c M /branches/plugin-2.0/row/row0merge.c M /branches/plugin-2.0/row/row0mysql.c M /branches/plugin-2.0/row/row0sel.c M /branches/plugin-2.0/row/row0umod.c M /branches/plugin-2.0/row/row0upd.c M /branches/plugin-2.0/srv/srv0srv.c M /branches/plugin-2.0/srv/srv0start.c M /branches/plugin-2.0/sync/sync0sync.c M /branches/plugin-2.0/trx/trx0i_s.c M /branches/plugin-2.0/trx/trx0sys.c M /branches/plugin-2.0/trx/trx0trx.c M /branches/zip/btr/btr0btr.c M /branches/zip/btr/btr0cur.c M /branches/zip/btr/btr0pcur.c M /branches/zip/buf/buf0buf.c M /branches/zip/buf/buf0lru.c M /branches/zip/dict/dict0boot.c M /branches/zip/dict/dict0crea.c M /branches/zip/dict/dict0dict.c M /branches/zip/dict/dict0load.c M /branches/zip/fsp/fsp0fsp.c M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h M /branches/zip/handler/handler0alter.cc M /branches/zip/include/btr0btr.h M /branches/zip/include/btr0cur.h M /branches/zip/include/btr0pcur.h M /branches/zip/include/btr0pcur.ic M /branches/zip/include/buf0buf.h M /branches/zip/include/dict0boot.h M /branches/zip/include/fil0fil.h M /branches/zip/include/log0log.h M /branches/zip/include/log0log.ic M /branches/zip/include/log0recv.h M /branches/zip/include/mem0dbg.h M /branches/zip/include/mem0dbg.ic M /branches/zip/include/mem0mem.h M /branches/zip/include/mem0mem.ic M /branches/zip/include/os0file.h M /branches/zip/include/que0que.h M /branches/zip/include/que0que.ic M /branches/zip/include/row0mysql.h M /branches/zip/include/srv0srv.h M /branches/zip/include/sync0sync.h M /branches/zip/include/trx0rseg.h M /branches/zip/include/trx0trx.h M /branches/zip/include/trx0types.h M /branches/zip/include/univ.i M /branches/zip/lock/lock0lock.c M /branches/zip/log/log0log.c M /branches/zip/log/log0recv.c M /branches/zip/mem/mem0dbg.c M /branches/zip/mem/mem0mem.c M /branches/zip/os/os0file.c M /branches/zip/page/page0page.c M /branches/zip/rem/rem0rec.c M /branches/zip/row/row0ins.c M /branches/zip/row/row0merge.c M /branches/zip/row/row0mysql.c M /branches/zip/row/row0sel.c M /branches/zip/row/row0umod.c M /branches/zip/srv/srv0srv.c M /branches/zip/srv/srv0start.c M /branches/zip/sync/sync0sync.c M /branches/zip/trx/trx0rseg.c M /branches/zip/trx/trx0trx.c Non-functional change: update copyright year to 2010 of the files that have been modified after 2010-01-01 according to svn. for f in $(svn log -v -r{2010-01-01}:HEAD \|grep "^ M " \|cut -b 16- \|sort -u) ; do sed -i "" -E 's/(Copyright $c$ [0-9]{4},) [0-9]{4}, (.Innobase Oy.+All Rights Reserved)/\1 2010, \2/' $f ; done ------------------------------------------------------------------------ r6750 \| marko \| 2010-02-22 08:57:23 +0200 (Mon, 22 Feb 2010) \| 2 lines Changed paths: M /branches/zip/include/row0sel.h M /branches/zip/row/row0sel.c branches/zip: row_fetch_store_uint4(): Remove unused function. This was added to trunk in r435. ------------------------------------------------------------------------ r6754 \| marko \| 2010-02-24 10:56:43 +0200 (Wed, 24 Feb 2010) \| 17 lines Changed paths: M /branches/zip/row/row0merge.c branches/zip: Allocate the merge sort buffers from a heap, not stack. The merge sort can use up to 48KiB of buffers when merging blocks. That can cause a stack overflow, especially on 64-bit systems when not building with inlined functions. This was reported as Issue #462. row_merge_dup_report(): Allocate buf and offsets from a heap. row_merge_heap_create(): Allocate space for buf[3] too. Fix bogus sizeof arithmetics that happened to work, because sizeof(ulint)==sizeof(void*). row_merge_blocks(), row_merge_blocks_copy(): Allocate buf[3] from heap. row_merge_insert_index_tuples(): Allocate buf from graph_heap. rb://258 approved and tested by Sunny Bains ------------------------------------------------------------------------ r6767 \| calvin \| 2010-03-01 18:16:10 +0200 (Mon, 01 Mar 2010) \| 3 lines Changed paths: M /branches/zip/srv/srv0srv.c branches/zip: fix bug#51587 Non-functional change. ------------------------------------------------------------------------ r6768 \| vasil \| 2010-03-02 18:20:48 +0200 (Tue, 02 Mar 2010) \| 5 lines Changed paths: M /branches/zip/include/btr0btr.h M /branches/zip/include/btr0btr.ic branches/zip: Add a NOTE to the comment of btr_node_ptr_get_child_page_no() to prevent mysterious bugs. ------------------------------------------------------------------------ r6770 \| marko \| 2010-03-03 12:52:55 +0200 (Wed, 03 Mar 2010) \| 12 lines Changed paths: M /branches/zip/handler/handler0alter.cc M /branches/zip/mysql-test/innodb-index.result M /branches/zip/mysql-test/innodb-index.test M /branches/zip/mysql-test/innodb.result M /branches/zip/mysql-test/innodb.test branches/zip: Disallow duplicate index name when creating an index. This should fix Mantis Issue #461. innodb.test, innodb.result, innodb-index.test, innodb-index.result: Adjust the test result and mention that the introduced restriction has been reported as MySQL Bug #51451. innobase_check_index_keys(): Add a parameter for the InnoDB table and check that no duplicate index name is added. Report errors by my_error() instead of sql_print_error(). rb://260 approved by Sunny Bains ------------------------------------------------------------------------ r6771 \| marko \| 2010-03-03 14:52:43 +0200 (Wed, 03 Mar 2010) \| 1 line Changed paths: M /branches/zip/ChangeLog Document r6770. ------------------------------------------------------------------------ r6773 \| marko \| 2010-03-03 15:31:54 +0200 (Wed, 03 Mar 2010) \| 2 lines Changed paths: M /branches/zip/row/row0row.c branches/zip: row_raw_format(): Silence a GCC 4.4.2 warning of possibly uninitialized variable format_in_hex. ------------------------------------------------------------------------	16 years ago
vasil	13aa9d0833	Non-functional change: update copyright year to 2010 of the files that have been modified after 2010-01-01 according to svn. for f in $(svn log -v -r{2010-01-01}:HEAD \|grep "^ M " \|cut -b 16- \|sort -u) ; do sed -i "" -E 's/(Copyright $c$ [0-9]{4},) [0-9]{4}, (.*Innobase Oy.+All Rights Reserved)/\1 2010, \2/' $f ; done	16 years ago
vasil	6c3ab906d5	Non-functional change: update copyright year to 2010 of the files that have been modified after 2010-01-01 according to svn. for f in $(svn log -v -r{2010-01-01}:HEAD \|grep "^ M " \|cut -b 16- \|sort -u) ; do sed -i "" -E 's/(Copyright $c$ [0-9]{4},) [0-9]{4}, (.*Innobase Oy.+All Rights Reserved)/\1 2010, \2/' $f ; done	16 years ago
marko	517c40e4ab	branches/zip: log_reserve_and_write_fast(): Correct a race condition in UNIV_LOG_LSN_DEBUG. This could have caused Issue #440.	16 years ago
marko	b045a484e8	branches/zip: log_reserve_and_write_fast(): Correct a race condition in UNIV_LOG_LSN_DEBUG. This could have caused Issue #440.	16 years ago
Aleksandr Kuzminsky	5b0ab60a4b	Synced with extensions-1.0.6 Rev. 135	16 years ago
inaam	0757affd7b	branches/innodb+: Merged revisions 5525:5971 from branches/zip ------------------------------------------------------------------------ r5971 \| marko \| 2009-09-23 09:03:51 -0400 (Wed, 23 Sep 2009) \| 2 lines branches/zip: os_file_pwrite(): Make the code compile in InnoDB Hot Backup when the pwrite system call is not available. ------------------------------------------------------------------------ r5956 \| calvin \| 2009-09-22 19:30:10 -0400 (Tue, 22 Sep 2009) \| 4 lines branches/zip: remove handler0vars.h from Makefile.am Left over from r5950. ------------------------------------------------------------------------ r5951 \| calvin \| 2009-09-22 11:17:01 -0400 (Tue, 22 Sep 2009) \| 4 lines branches/zip: adjust CMake file to work with old versions of MySQL Tested with MySQL 5.1.38 and 5.1.30. ------------------------------------------------------------------------ r5950 \| calvin \| 2009-09-22 02:42:46 -0400 (Tue, 22 Sep 2009) \| 17 lines branches/zip: adjust Windows loading method for 5.1.38 Starting at 5.1.38, MySQL server exports symbols needed for dynamic plugin on Windows. There is no need for Windows specific loading. Also, the CMake files are simplified in 5.1.38. When WITH_INNOBASE_STORAGE_ENGINE is specified during configuration (win\configure.js), InnoDB is built as a static library. Otherwise, a dynamic InnoDB will be built (ha_innodb.dll). CMakeLists.txt requires minor changes in order to work with MySQL prior to 5.1.38. The changes will be in a separate patch. This patch addresses Mantis issue#286. ------------------------------------------------------------------------ r5945 \| calvin \| 2009-09-21 10:53:22 -0400 (Mon, 21 Sep 2009) \| 4 lines branches/zip: fix a type in r5935 Should be innodb_open_files, spotted by Michael. ------------------------------------------------------------------------ r5940 \| vasil \| 2009-09-21 01:26:04 -0400 (Mon, 21 Sep 2009) \| 4 lines branches/zip: Add ChangeLog entries for c5938. ------------------------------------------------------------------------ r5938 \| calvin \| 2009-09-19 03:14:25 -0400 (Sat, 19 Sep 2009) \| 41 lines branches/zip: Merge revisions 2584:2956 from branches/6.0, except c2932. Bug#37232 and bug#31183 were fixed in the 6.0 branch only. They should be fixed in the plugin too, specially MySQL 6.0 is discontinued at this point. ------------------------------------------------------------------------ r2604 \| inaam \| 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) \| 8 lines branches/6.0 bug#37232 Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1. Now SELECT on t1 is performed as a consistent read when the isolation level is set to READ COMMITTED. Reviewed by: Heikki ------------------------------------------------------------------------ r2605 \| inaam \| 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) \| 7 lines branches/6.0 Added a comment to clarify why distinct calls to read MySQL binary log file name and log position do not entail any race condition. Suggested by: Heikki ------------------------------------------------------------------------ r2956 \| inaam \| 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) \| 11 lines branches/6.0 bug#31183 If the system tablespace runs out of space because 'autoextend' is not specified with innodb_data_file_path there was no error message printed to the error log. The client would get 'table full' error. This patch prints an appropriate error message to the error log. rb://43 Approved by: Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5935 \| calvin \| 2009-09-18 17:08:02 -0400 (Fri, 18 Sep 2009) \| 6 lines branches/zip: fix bug#44338; minor non-functional changes Bug#44338 innodb has message about non-existing option innodb_max_files_open. Change the option to innodb_open_files. The fix was committed into 6.0 branch. ------------------------------------------------------------------------ r5934 \| vasil \| 2009-09-18 13:06:46 -0400 (Fri, 18 Sep 2009) \| 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5924 \| vasil \| 2009-09-18 00:59:30 -0400 (Fri, 18 Sep 2009) \| 4 lines branches/zip: White space and formatting cleanup in the ChangeLog ------------------------------------------------------------------------ r5922 \| marko \| 2009-09-17 02:32:08 -0400 (Thu, 17 Sep 2009) \| 4 lines branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3. Apparently, the definition of compressBound() has slightly changed. This has been filed as Mantis Issue #345. ------------------------------------------------------------------------ r5920 \| vasil \| 2009-09-16 14:47:22 -0400 (Wed, 16 Sep 2009) \| 4 lines branches/zip: Add ChangeLog entries for r5916. ------------------------------------------------------------------------ r5919 \| vasil \| 2009-09-16 14:37:13 -0400 (Wed, 16 Sep 2009) \| 4 lines branches/zip: Whitespace cleanup in the ChangeLog. ------------------------------------------------------------------------ r5917 \| marko \| 2009-09-16 05:56:23 -0400 (Wed, 16 Sep 2009) \| 1 line branches/zip: innobase_get_cset_width(): Cache the value of current_thd. ------------------------------------------------------------------------ r5916 \| marko \| 2009-09-16 05:54:43 -0400 (Wed, 16 Sep 2009) \| 128 lines branches/zip: Merge revisions 5622:5912 from branches/5.1, except r5700 (changes to CMakeLists.txt) ------------------------------------------------------------------------ r5622 \| vasil \| 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) \| 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ r5740 \| jyang \| 2009-09-03 06:33:47 +0300 (Thu, 03 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Sunny Bains. ------------------------------------------------------------------------ r5741 \| jyang \| 2009-09-03 07:16:01 +0300 (Thu, 03 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5757 \| jyang \| 2009-09-04 04:26:13 +0300 (Fri, 04 Sep 2009) \| 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h D /branches/5.1/mysql-test/innodb_bug46000.result D /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Revert change in 5740. Making the fix in a subsequent check in. ------------------------------------------------------------------------ r5760 \| jyang \| 2009-09-04 07:07:34 +0300 (Fri, 04 Sep 2009) \| 3 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc D /branches/5.1/mysql-test/innodb_bug44369.result D /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: This is to revert change 5741. A return status for create_table_def() needs to be fixed. ------------------------------------------------------------------------ r5797 \| calvin \| 2009-09-09 18:26:29 +0300 (Wed, 09 Sep 2009) \| 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: merge change from 5.1.38 HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. ------------------------------------------------------------------------ r5799 \| calvin \| 2009-09-09 20:47:31 +0300 (Wed, 09 Sep 2009) \| 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: fix bug#46256 Allow tables to be dropped even if the collation is not found, but issue a warning. Could not find an easy way to add mysql-test since it requires changes to charsets and restarting the server. Tests were executed manually. Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5805 \| vasil \| 2009-09-10 08:41:48 +0300 (Thu, 10 Sep 2009) \| 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix a compilation warning caused by c5799: handler/ha_innodb.cc: In function 'void innobase_get_cset_width(ulint, ulint, ulint)': handler/ha_innodb.cc:830: warning: format '%d' expects type 'int', but argument 2 has type 'ulint' ------------------------------------------------------------------------ r5834 \| jyang \| 2009-09-11 00:43:05 +0300 (Fri, 11 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5895 \| jyang \| 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Marko Makela. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5910 \| marko \| 2009-09-16 04:07:21 -0400 (Wed, 16 Sep 2009) \| 9 lines branches/zip: Introduce UNIV_LOG_LSN_DEBUG and MLOG_LSN for redo log diagnostics. This was written in order to better track down Issue #313 in InnoDB Hot Backup. MLOG_LSN: A new redo log entry type, for recording the current log sequence number (LSN). This will be checked in an assertion in recv_parse_log_rec(). rb://161, discussed with Sunny and Vasil. ------------------------------------------------------------------------ r5899 \| marko \| 2009-09-15 07:26:01 -0400 (Tue, 15 Sep 2009) \| 4 lines branches/zip: ut0ut.h: Do not #include "os0sync.h" #ifdef UNIV_HOTBACKUP. Since r5872, the InnoDB Hot Backup build was broken. Fix it by not defining any thread synchronization primitives in ut0ut.h. InnoDB Hot Backup is a single-threaded program. ------------------------------------------------------------------------ r5898 \| marko \| 2009-09-15 06:18:50 -0400 (Tue, 15 Sep 2009) \| 2 lines branches/zip: Add /.dirstamp to svn:ignore, for https://svn.innodb.com/svn/hotbackup/branches/3.5 ------------------------------------------------------------------------ r5897 \| marko \| 2009-09-15 04:29:00 -0400 (Tue, 15 Sep 2009) \| 8 lines branches/zip: Avoid bogus messages about latching order violations when UNIV_SYNC_DEBUG is defined. sync_thread_levels_g(): Add the parameter "warn". Do not print anything unless it is set. sync_thread_add_level(): Pass warn=TRUE to sync_thread_levels_g() when the check is within an assertion; FALSE if it is not. ------------------------------------------------------------------------ r5893 \| inaam \| 2009-09-14 11:20:48 -0400 (Mon, 14 Sep 2009) \| 10 lines branches/zip rb://159 In case of pages that are not made young the counter is incremented only when the page in question is 'old'. In case of pages that are made young the counter is incremented in case of all pages. For apple to apple comparison this patch changes the 'young-making' counter to consider only 'old' blocks. Approved by: Marko ------------------------------------------------------------------------ r5889 \| vasil \| 2009-09-14 05:17:18 -0400 (Mon, 14 Sep 2009) \| 5 lines branches/zip: Add missing return statement in the test program that could have caused a warning. ------------------------------------------------------------------------ r5888 \| vasil \| 2009-09-14 04:38:45 -0400 (Mon, 14 Sep 2009) \| 40 lines branches/zip: Back-merge c5880 and c5881 from branches/embedded-1.0: ------------------------------------------------------------------------ r5880 \| vasil \| 2009-09-12 17:28:44 +0300 (Sat, 12 Sep 2009) \| 18 lines Changed paths: M /branches/embedded-1.0/configure.in M /branches/embedded-1.0/include/os0sync.h M /branches/embedded-1.0/srv/srv0start.c branches/embedded-1.0: Clean up and simplify the code that surrounds the atomic ops: Simplify the code that prints what atomics are used: Instead of repeating the same conditions on which each atomics are used use just one printf that prints a variable defined by the code which chooses what atomics to use. * In os0sync.h pick up each atomic variant only if it has been selected by autoconf (based on IB_ATOMIC_MODE_* macros). Define the startup message to be printed. * In configure.in: check what user has chosen and if he has chosen something that is not available, emit an error. If nothing has been chosen explicitly by the user, auto select an option according to the described logic in configure.in. ------------------------------------------------------------------------ r5881 \| vasil \| 2009-09-12 20:08:27 +0300 (Sat, 12 Sep 2009) \| 4 lines Changed paths: M /branches/embedded-1.0/configure.in branches/embedded-1.0: Fix syntax error in test program. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5875 \| vasil \| 2009-09-12 08:11:25 -0400 (Sat, 12 Sep 2009) \| 4 lines branches/zip: Remove unnecessary macro. ------------------------------------------------------------------------ r5872 \| vasil \| 2009-09-12 05:35:17 -0400 (Sat, 12 Sep 2009) \| 5 lines branches/zip: Explicitly include os0sync.h to the places where HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are used to avoid potential problems. ------------------------------------------------------------------------ r5871 \| vasil \| 2009-09-12 05:25:44 -0400 (Sat, 12 Sep 2009) \| 6 lines branches/zip: Rename HAVE_SOLARIS_ATOMICS to HAVE_IB_SOLARIS_ATOMICS and IB_HAVE_PAUSE_INSTRUCTION to HAVE_IB_PAUSE_INSTRUCTION so they all follow the same HAVE_IB_* convention. ------------------------------------------------------------------------ r5870 \| vasil \| 2009-09-12 05:13:44 -0400 (Sat, 12 Sep 2009) \| 7 lines branches/zip: Define HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS in os0sync.h instead of in univ.i. The code expects os_() macros to be present if HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are defined. So define them next to defining the os_() macros. ------------------------------------------------------------------------ r5869 \| vasil \| 2009-09-12 04:33:11 -0400 (Sat, 12 Sep 2009) \| 15 lines branches/zip: Include ut0auxconf.h only if none of the macros it would define is defined. The check when to include this header was outdated from the time when there was only one macro involved. Move the atomics checks that are in univ.i outside of #if windows ... #else ... #endif This simplifies the code and removes some duplicates like defining HAVE_ATOMIC_BUILTINS if HAVE_WINDOWS_ATOMICS is defined in both branches. Do not define the same macro HAVE_ATOMIC_PTHREAD_T for different events. Instead define HAVE_IB_ATOMIC_PTHREAD_T_GCC and HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS. ------------------------------------------------------------------------ r5868 \| vasil \| 2009-09-12 04:01:17 -0400 (Sat, 12 Sep 2009) \| 6 lines branches/zip: Move the check whether to include ut0auxconf.h before everything because we are now even checking for GCC atomics, we relied on MySQL to define this macro before. ------------------------------------------------------------------------ r5867 \| vasil \| 2009-09-12 03:43:45 -0400 (Sat, 12 Sep 2009) \| 4 lines branches/zip: Update comment to reflect reality. ------------------------------------------------------------------------ r5866 \| vasil \| 2009-09-12 03:30:08 -0400 (Sat, 12 Sep 2009) \| 5 lines branches/zip: Add the check for GCC atomics to ut0auxconf* (copied from plug.in) because we no longer rely on MySQL's HAVE_GCC_ATOMIC_BUILTINS. ------------------------------------------------------------------------ r5865 \| vasil \| 2009-09-12 03:26:03 -0400 (Sat, 12 Sep 2009) \| 10 lines branches/zip: Simplify the compile time checks by splittig them into 5 independent checks: * Whether GCC atomics are available * Whether pthread_t can be used by GCC atomics * Whether Solaris libc atomics are available * Whether pthread_t can be used by Solaris libs atomics * Checking the size of pthread_t ------------------------------------------------------------------------ r5864 \| vasil \| 2009-09-12 03:22:55 -0400 (Sat, 12 Sep 2009) \| 4 lines branches/zip: Include string.h which is needed for memset(). ------------------------------------------------------------------------ r5863 \| vasil \| 2009-09-12 03:07:08 -0400 (Sat, 12 Sep 2009) \| 10 lines branches/zip: Check that pthread_t can indeed be passed to Solaris atomic functions, instead of assuming that it can be passed if 0 can be assigned to it. It could be that: * 0 can be assigned, but pthread_t cannot be passed and * 0 cannot be assigned but pthread_t can be passed Better to check what we are interested in, not something else and make assumptions. ------------------------------------------------------------------------ r5858 \| vasil \| 2009-09-11 13:46:47 -0400 (Fri, 11 Sep 2009) \| 4 lines branches/zip: Fix the indentation of the closing bracket. ------------------------------------------------------------------------ r5826 \| marko \| 2009-09-10 07:29:46 -0400 (Thu, 10 Sep 2009) \| 12 lines branches/zip: Roll back recovered dictionary transactions before dropping incomplete indexes (Issue #337). trx_rollback_or_clean_recovered(ibool all): New function, split from trx_rollback_or_clean_all_recovered(). all==FALSE will only roll back dictionary transactions. recv_recovery_from_checkpoint_finish(): Call trx_rollback_or_clean_recovered(FALSE) before row_merge_drop_temp_indexes(). rb://158 approved by Sunny Bains ------------------------------------------------------------------------ r5825 \| marko \| 2009-09-10 06:47:09 -0400 (Thu, 10 Sep 2009) \| 20 lines branches/zip: Reduce mutex contention that was introduced when addressing Bug #45015 (Issue #316), in r5703. buf_page_set_accessed_make_young(): New auxiliary function, called by buf_page_get_zip(), buf_page_get_gen(), buf_page_optimistic_get_func(). Call ut_time_ms() outside of buf_pool_mutex. Use cached access_time. buf_page_set_accessed(): Add the parameter time_ms, so that ut_time_ms() need not be called while holding buf_pool_mutex. buf_page_optimistic_get_func(), buf_page_get_known_nowait(): Read buf_page_t::access_time without holding buf_pool_mutex. This should be OK, because the field is only used for heuristic purposes. buf_page_peek_if_too_old(): If buf_pool->freed_page_clock == 0, return FALSE, so that we will not waste time moving blocks in the LRU list in the warm-up phase or when the workload fits in the buffer pool. rb://156 approved by Sunny Bains ------------------------------------------------------------------------ r5822 \| marko \| 2009-09-10 06:10:20 -0400 (Thu, 10 Sep 2009) \| 1 line branches/zip: buf_page_release(): De-stutter the function comment. ------------------------------------------------------------------------ r5804 \| marko \| 2009-09-10 01:29:31 -0400 (Thu, 10 Sep 2009) \| 1 line branches/zip: trx_cleanup_at_db_startup(): Fix a typo in comment. ------------------------------------------------------------------------ r5798 \| calvin \| 2009-09-09 11:28:10 -0400 (Wed, 09 Sep 2009) \| 5 lines branches/zip: HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. But the plugin should still work with previous versions of MySQL. ------------------------------------------------------------------------ r5792 \| vasil \| 2009-09-09 09:35:58 -0400 (Wed, 09 Sep 2009) \| 32 lines branches/zip: Fix a bug in manipulating the variable innodb_old_blocks_pct: for any value assigned it got that value -1, except for 75. When assigned 75, it got 75. mysql> set global innodb_old_blocks_pct=15; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ \| Variable_name \| Value \| +-----------------------+-------+ \| innodb_old_blocks_pct \| 14 \| +-----------------------+-------+ 1 row in set (0.00 sec) mysql> set global innodb_old_blocks_pct=75; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ \| Variable_name \| Value \| +-----------------------+-------+ \| innodb_old_blocks_pct \| 75 \| +-----------------------+-------+ After the fix it gets exactly what was assigned. Approved by: Marko (via IM) ------------------------------------------------------------------------ r5783 \| marko \| 2009-09-09 03:25:00 -0400 (Wed, 09 Sep 2009) \| 1 line branches/zip: buf_page_is_accessed(): Correct the function comment. ------------------------------------------------------------------------ r5782 \| marko \| 2009-09-09 03:00:59 -0400 (Wed, 09 Sep 2009) \| 2 lines branches/zip: buf_page_peek_if_too_old(): Silence a compiler warning that was introduced in r5779 on 32-bit systems. ------------------------------------------------------------------------ r5780 \| marko \| 2009-09-09 02:50:50 -0400 (Wed, 09 Sep 2009) \| 1 line branches/zip: ut_time_ms(): Return ulint, not uint. ------------------------------------------------------------------------ r5779 \| marko \| 2009-09-09 02:17:19 -0400 (Wed, 09 Sep 2009) \| 2 lines branches/zip: buf_page_peek_if_too_old(): Make the bitmasking work when buf_pool->freed_page_clock is wider than 32 bits. ------------------------------------------------------------------------ r5777 \| marko \| 2009-09-08 11:50:25 -0400 (Tue, 08 Sep 2009) \| 2 lines branches/zip: Remove BUF_LRU_INITIAL_RATIO, which should have been removed together with buf_LRU_get_recent_limit(). ------------------------------------------------------------------------ r5775 \| calvin \| 2009-09-07 17:15:05 -0400 (Mon, 07 Sep 2009) \| 13 lines branches/zip: Build InnoDB on Windows with UNIV_HOTBACKUP The changes are non-functional changes for normal InnoDB, but needed for building the Hot Backup on Windows (with UNIV_HOTBACKUP defined). - Define os_aio_use_native_aio for HB. - Do not acquire seek mutexes for backup since HB is single threaded. - Do not use srv_flush_log_at_trx_commit for HB build rb://155 Approved by: Marko ------------------------------------------------------------------------ r5752 \| marko \| 2009-09-03 10:55:51 -0400 (Thu, 03 Sep 2009) \| 10 lines branches/zip: recv_recover_page_func(): Write the log sequence number to the compressed page, if there is one. Previously, the function only wrote the LSN to the uncompressed page. It is not clear why recv_recover_page_func() is updating FIL_PAGE_LSN in the buffer pool. The log sequence number will be stamped on the page when it is flushed to disk, in buf_flush_init_for_writing(). I noticed this inconsistency when analyzing Issue #313, but this patch does not fix it. That is no surprise, since FIL_PAGE_LSN should only matter on disk files, not in the buffer pool. ------------------------------------------------------------------------ r5751 \| marko \| 2009-09-03 10:36:15 -0400 (Thu, 03 Sep 2009) \| 7 lines branches/zip: row_merge(): Remove a bogus debug assertion that was triggered when creating an index on an empty table. row_merge_sort(): Add debug assertions and comments that justify the loop termination condition. The bogus assertion ut_ad(ihalf > 0) was reported by Michael. ------------------------------------------------------------------------ r5748 \| marko \| 2009-09-03 07:05:44 -0400 (Thu, 03 Sep 2009) \| 1 line branches/zip: MLOG_MULTI_REC_END: Correct the comment. ------------------------------------------------------------------------ r5747 \| marko \| 2009-09-03 06:46:38 -0400 (Thu, 03 Sep 2009) \| 2 lines branches/zip: recv_scan_log_recs(): Replace while with do...while, because the termination condition will always hold on the first iteration. ------------------------------------------------------------------------ r5746 \| marko \| 2009-09-03 04:55:36 -0400 (Thu, 03 Sep 2009) \| 2 lines branches/zip: log_reserve_and_write_fast(): Do not cache the log_sys pointer in a local variable. ------------------------------------------------------------------------ r5745 \| marko \| 2009-09-03 04:38:22 -0400 (Thu, 03 Sep 2009) \| 2 lines branches/zip: log_check_log_recs(): Enclose in #ifdef UNIV_LOG_DEBUG. Add const qualifiers. ------------------------------------------------------------------------ r5744 \| marko \| 2009-09-03 04:28:35 -0400 (Thu, 03 Sep 2009) \| 1 line branches/zip: ut_align(): Make ptr const, like in ut_align_down(). ------------------------------------------------------------------------ r5743 \| marko \| 2009-09-03 02:36:12 -0400 (Thu, 03 Sep 2009) \| 3 lines branches/zip: log_reserve_and_write_fast(): Remove the redundant output parameter "success". Success is also indicated by a nonzero return value. ------------------------------------------------------------------------ r5736 \| marko \| 2009-09-02 03:53:19 -0400 (Wed, 02 Sep 2009) \| 1 line branches/zip: Enclose some timestamp functions in #ifndef UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5735 \| marko \| 2009-09-02 03:43:09 -0400 (Wed, 02 Sep 2009) \| 2 lines branches/zip: univ.i: Do not undefine PACKAGE or VERSION. InnoDB source code does not refer to these macros. ------------------------------------------------------------------------ r5734 \| sunny \| 2009-09-02 03:08:45 -0400 (Wed, 02 Sep 2009) \| 2 lines branches/zip: Update ChangeLog with r5733 changes. ------------------------------------------------------------------------ r5733 \| sunny \| 2009-09-02 03:05:15 -0400 (Wed, 02 Sep 2009) \| 6 lines branches/zip: Fix a regression introduced by the fix for bug#26316. We check whether a transaction holds any AUTOINC locks before we acquire the kernel mutex and release those locks. Fix for rb://153. Approved by Marko. ------------------------------------------------------------------------ r5716 \| vasil \| 2009-08-31 03:47:49 -0400 (Mon, 31 Aug 2009) \| 9 lines branches/zip: Fix Bug#46718 InnoDB plugin incompatible with gcc 4.1 (at least: on PPC): "Undefined symbol" by implementing our own check in plug.in instead of using the result from the check from MySQL because it is insufficient. Approved by: Marko (rb://154) ------------------------------------------------------------------------ r5714 \| marko \| 2009-08-31 02:10:10 -0400 (Mon, 31 Aug 2009) \| 5 lines branches/zip: buf_chunk_not_freed(): Do not acquire block->mutex unless block->page.state == BUF_BLOCK_FILE_PAGE. Check that block->page.state makes sense. Approved by Sunny Bains over the IM. ------------------------------------------------------------------------ r5709 \| inaam \| 2009-08-28 02:22:46 -0400 (Fri, 28 Aug 2009) \| 5 lines branches/zip rb://152 Disable display of deprecated parameter innodb_file_io_threads in 'show variables'. ------------------------------------------------------------------------ r5708 \| inaam \| 2009-08-27 18:43:32 -0400 (Thu, 27 Aug 2009) \| 4 lines branches/zip Remove redundant TRUE : FALSE from the return statement ------------------------------------------------------------------------ r5707 \| inaam \| 2009-08-27 12:20:35 -0400 (Thu, 27 Aug 2009) \| 6 lines branches/zip Remove unused macros as we erased the random readahead code in r5703. Also fixed some comments. ------------------------------------------------------------------------ r5706 \| inaam \| 2009-08-27 12:00:27 -0400 (Thu, 27 Aug 2009) \| 20 lines branches/zip rb://147 Done away with following two status variables: innodb_buffer_pool_read_ahead_rnd innodb_buffer_pool_read_ahead_seq Introduced two new status variables: innodb_buffer_pool_read_ahead = number of pages read as part of readahead since server startup innodb_buffer_pool_read_ahead_evicted = number of pages that are read in as readahead but were evicted before ever being accessed since server startup i.e.: a measure of how badly our readahead is performing SHOW INNODB STATUS will show two extra numbers in buffer pool section: pages read ahead/sec and pages evicted without access/sec Approved by: Marko ------------------------------------------------------------------------ r5705 \| marko \| 2009-08-27 07:56:24 -0400 (Thu, 27 Aug 2009) \| 11 lines branches/zip: dict_index_find_cols(): On column name lookup failure, return DB_CORRUPTION (HA_ERR_CRASHED) instead of abnormally terminating the server. Also, disable the previously added diagnostic output to the error log, because mysql-test-run does not like extra output in the error log. (Bug #44571) dict_index_add_to_cache(): Handle errors from dict_index_find_cols(). mysql-test/innodb_bug44571.test: A test case for triggering the bug. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5704 \| marko \| 2009-08-27 04:31:17 -0400 (Thu, 27 Aug 2009) \| 32 lines branches/zip: Fix a critical bug in fast index creation that could corrupt the created indexes. row_merge(): Make "half" an in/out parameter. Determine the offset of half the output file. Copy the last blocks record-by-record instead of block-by-block, so that the records can be counted. Check that the input and output have matching n_rec. row_merge_sort(): Do not assume that two blocks of size N are merged into a block of size 2N. The output block can be shorter than the input if the last page of each input block is almost empty. Use an accurate termination condition, based on the "half" computed by row_merge(). row_merge_read(), row_merge_write(), row_merge_blocks(): Add debug output. merge_file_t, row_merge_file_create(): Add n_rec, the number of records in the merge file. row_merge_read_clustered_index(): Update n_rec. row_merge_blocks(): Update and check n_rec. row_merge_blocks_copy(): New function, for copying the last blocks in row_merge(). Update and check n_rec. This bug was discovered with a user-supplied test case that creates an index where the initial temporary file is 249 one-megabyte blocks and the merged files become smaller. In the test, possible merge record sizes are 10, 18, and 26 bytes. rb://150 approved by Sunny Bains. This addresses Issue #320. ------------------------------------------------------------------------ r5703 \| marko \| 2009-08-27 03:25:00 -0400 (Thu, 27 Aug 2009) \| 41 lines branches/zip: Replace the constant 3/8 ratio that controls the LRU_old size with the settable global variable innodb_old_blocks_pct. The minimum and maximum values are 5 and 95 per cent, respectively. The default is 1003/8, in line with the old behavior. ut_time_ms(): New utility function, to return the current time in milliseconds. TODO: Is there a more efficient timestamp function, such as rdtsc divided by a power of two? buf_LRU_old_threshold_ms: New variable, corresponding to innodb_old_blocks_time. The value 0 is the default behaviour: no timeout before making blocks 'new'. bpage->accessed, bpage->LRU_position, buf_pool->ulint_clock: Remove. bpage->access_time: New field, replacing bpage->accessed. Protected by buf_pool_mutex instead of bpage->mutex. Updated when a page is created or accessed the first time in the buffer pool. buf_LRU_old_ratio, innobase_old_blocks_pct: New variables, corresponding to innodb_old_blocks_pct buf_LRU_old_ratio_update(), innobase_old_blocks_pct_update(): Update functions for buf_LRU_old_ratio, innobase_old_blocks_pct. buf_page_peek_if_too_old(): Compare ut_time_ms() to bpage->access_time if buf_LRU_old_threshold_ms && bpage->old. Else observe buf_LRU_old_ratio and bpage->freed_page_clock. buf_pool_t: Add n_pages_made_young, n_pages_not_made_young, n_pages_made_young_old, n_pages_not_made_young, for statistics. buf_print(): Display buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is only for crash diagnostics. buf_print_io(): Display buf_pool->LRU_old_len and quantities derived from buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is invoked by SHOW ENGINE INNODB STATUS. rb://129 approved by Heikki Tuuri. This addresses Bug #45015. ------------------------------------------------------------------------ r5702 \| marko \| 2009-08-27 03:03:15 -0400 (Thu, 27 Aug 2009) \| 1 line branches/zip: Document also the files affected by r5698 in the ChangeLog. ------------------------------------------------------------------------ r5701 \| marko \| 2009-08-27 03:01:42 -0400 (Thu, 27 Aug 2009) \| 1 line branches/zip: Document r5698 in the ChangeLog. ------------------------------------------------------------------------ r5698 \| inaam \| 2009-08-26 10:34:35 -0400 (Wed, 26 Aug 2009) \| 13 lines branches/zip bug#42885 rb://148 The call to put IO threads to sleep was most probably meant for Windows only as the comment in buf0rea.c suggests. However it was enabled on all platforms. This patch restricts the sleep call to windows. This approach of not putting threads to sleep makes even more sense because now we have multiple threads working in the background and it probably is not a good idea to put all of them to sleep because a user thread wants to post a batch for readahead. Approved by: Marko ------------------------------------------------------------------------ r5697 \| vasil \| 2009-08-26 09:44:40 -0400 (Wed, 26 Aug 2009) \| 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5696 \| vasil \| 2009-08-26 09:15:59 -0400 (Wed, 26 Aug 2009) \| 14 lines branches/zip: Merge a change from MySQL: http://lists.mysql.com/commits/80832 2968 Jonathan Perkin 2009-08-14 Build fixes for Windows, AIX, HP/UX and Sun Studio11, from Timothy Smith. modified: CMakeLists.txt cmd-line-utils/readline/util.c storage/innodb_plugin/handler/i_s.cc storage/innodb_plugin/include/univ.i ------------------------------------------------------------------------ r5695 \| marko \| 2009-08-26 09:14:59 -0400 (Wed, 26 Aug 2009) \| 1 line branches/zip: UNIV_DEBUG_LOCK_VALIDATE: Move the definition to univ.i. ------------------------------------------------------------------------ r5694 \| marko \| 2009-08-26 07:25:26 -0400 (Wed, 26 Aug 2009) \| 2 lines branches/zip: buf_page_t: Clarify that bpage->list may contain garbage. This comment was provoked by Inaam. ------------------------------------------------------------------------ r5687 \| vasil \| 2009-08-20 05:20:22 -0400 (Thu, 20 Aug 2009) \| 8 lines branches/zip: ChangeLog: Follow the convention from the rest of the ChangeLog: for bugfixes from bugs.mysql.com only the bug number and title goes in the ChangeLog. Detailed explanation on what is the problem and how it was fixed is present in the bugs database. ------------------------------------------------------------------------ r5686 \| vasil \| 2009-08-20 05:15:05 -0400 (Thu, 20 Aug 2009) \| 4 lines branches/zip: White-space fixup. ------------------------------------------------------------------------ r5685 \| sunny \| 2009-08-20 04:18:29 -0400 (Thu, 20 Aug 2009) \| 2 lines branches/zip: Update the ChangeLog with r5684 change. ------------------------------------------------------------------------ r5684 \| sunny \| 2009-08-20 04:05:30 -0400 (Thu, 20 Aug 2009) \| 10 lines branches/zip: Fix bug# 46650: Innodb assertion autoinc_lock == lock in lock_table_remove_low on INSERT SELECT We only store the autoinc locks that are granted in the transaction's autoinc lock vector. A transacton, that has been rolled back due to a deadlock because of an AUTOINC lock attempt, will not have added that lock to the vector. We need to check for that when we remove that lock. rb://145 Approved by Marko. ------------------------------------------------------------------------ r5681 \| sunny \| 2009-08-14 02:16:24 -0400 (Fri, 14 Aug 2009) \| 3 lines branches/zip: When building HotBackup srv_use_sys_malloc is #ifdef out. We move access to the this variable within a !UNIV_HOTBACKUP block. ------------------------------------------------------------------------ r5671 \| marko \| 2009-08-13 04:46:33 -0400 (Thu, 13 Aug 2009) \| 5 lines branches/zip: ha_innobase::add_index(): Fix Bug #46557: after a successful operation, read innodb_table->flags from the newly created table object, not from the old one that was just freed. Approved by Sunny. ------------------------------------------------------------------------ r5670 \| marko \| 2009-08-12 09:16:37 -0400 (Wed, 12 Aug 2009) \| 2 lines branches/zip: trx_undo_rec_copy(): Add const qualifier to undo_rec. This is a non-functional change. ------------------------------------------------------------------------ r5663 \| marko \| 2009-08-11 07:42:37 -0400 (Tue, 11 Aug 2009) \| 2 lines branches/zip: trx_general_rollback_for_mysql(): Remove the redundant parameter partial. If savept==NULL, partial==FALSE. ------------------------------------------------------------------------ r5662 \| marko \| 2009-08-11 05:54:16 -0400 (Tue, 11 Aug 2009) \| 1 line branches/zip: Bump the version number to 1.0.5 after releasing 1.0.4. ------------------------------------------------------------------------ r5642 \| calvin \| 2009-08-06 19:04:03 -0400 (Thu, 06 Aug 2009) \| 2 lines branches/zip: remove duplicate "the" in comments. ------------------------------------------------------------------------ r5639 \| marko \| 2009-08-06 06:39:34 -0400 (Thu, 06 Aug 2009) \| 3 lines branches/zip: mem_heap_block_free(): If innodb_use_sys_malloc is set, do not tell Valgrind that the memory is free, to avoid a bogus warning in Valgrind's built-in free() hook. ------------------------------------------------------------------------ r5636 \| marko \| 2009-08-05 08:27:30 -0400 (Wed, 05 Aug 2009) \| 2 lines branches/zip: lock_rec_validate_page(): Add the parameter zip_size. This should help track down Mantis Issue #289. ------------------------------------------------------------------------ r5635 \| marko \| 2009-08-05 07:06:55 -0400 (Wed, 05 Aug 2009) \| 2 lines branches/zip: Replace <number> with NUMBER in some comments, to avoid problems with Doxygen XML output. ------------------------------------------------------------------------ r5629 \| marko \| 2009-08-04 07:42:44 -0400 (Tue, 04 Aug 2009) \| 1 line branches/zip: mysql-test: Pass MTR's internal checks. ------------------------------------------------------------------------ r5626 \| vasil \| 2009-08-04 01:53:31 -0400 (Tue, 04 Aug 2009) \| 4 lines branches/zip: Revert the dummy change from c5625. ------------------------------------------------------------------------ r5625 \| vasil \| 2009-08-04 01:52:48 -0400 (Tue, 04 Aug 2009) \| 32 lines branches/zip: Merge 5518:5622 from branches/5.1, resolving conflict in r5622 (after resolving the conflict Makefile.am was not changed so I have made a dummy change so I can commit and thus record that branches/5.1 has been merged in branches/zip up to 5622): ------------------------------------------------------------------------ r5622 \| vasil \| 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) \| 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5614 \| vasil \| 2009-07-31 11:09:07 -0400 (Fri, 31 Jul 2009) \| 6 lines branches/zip: Add fsp0types.h to the list of noinst_HEADERS Suggested by: Sergey Vojtovich <svoj@sun.com> ------------------------------------------------------------------------ r5539 \| vasil \| 2009-07-21 06:28:27 -0400 (Tue, 21 Jul 2009) \| 4 lines branches/zip: Add a test program to check whether the PAUSE instruction is available. ------------------------------------------------------------------------ r5537 \| vasil \| 2009-07-21 05:31:26 -0400 (Tue, 21 Jul 2009) \| 5 lines branches/zip: Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per line. ------------------------------------------------------------------------ r5527 \| sunny \| 2009-07-20 17:56:30 -0400 (Mon, 20 Jul 2009) \| 2 lines branches/zip: For HotBackup builds we don't want to hide the symbols. ------------------------------------------------------------------------ r5525 \| calvin \| 2009-07-20 13:14:30 -0400 (Mon, 20 Jul 2009) \| 2 lines branches/zip: add ChangeLog entry for r5524. ------------------------------------------------------------------------	16 years ago
inaam	95b46843b7	branches/innodb+: Merged revisions 5525:5971 from branches/zip ------------------------------------------------------------------------ r5971 \| marko \| 2009-09-23 09:03:51 -0400 (Wed, 23 Sep 2009) \| 2 lines branches/zip: os_file_pwrite(): Make the code compile in InnoDB Hot Backup when the pwrite system call is not available. ------------------------------------------------------------------------ r5956 \| calvin \| 2009-09-22 19:30:10 -0400 (Tue, 22 Sep 2009) \| 4 lines branches/zip: remove handler0vars.h from Makefile.am Left over from r5950. ------------------------------------------------------------------------ r5951 \| calvin \| 2009-09-22 11:17:01 -0400 (Tue, 22 Sep 2009) \| 4 lines branches/zip: adjust CMake file to work with old versions of MySQL Tested with MySQL 5.1.38 and 5.1.30. ------------------------------------------------------------------------ r5950 \| calvin \| 2009-09-22 02:42:46 -0400 (Tue, 22 Sep 2009) \| 17 lines branches/zip: adjust Windows loading method for 5.1.38 Starting at 5.1.38, MySQL server exports symbols needed for dynamic plugin on Windows. There is no need for Windows specific loading. Also, the CMake files are simplified in 5.1.38. When WITH_INNOBASE_STORAGE_ENGINE is specified during configuration (win\configure.js), InnoDB is built as a static library. Otherwise, a dynamic InnoDB will be built (ha_innodb.dll). CMakeLists.txt requires minor changes in order to work with MySQL prior to 5.1.38. The changes will be in a separate patch. This patch addresses Mantis issue#286. ------------------------------------------------------------------------ r5945 \| calvin \| 2009-09-21 10:53:22 -0400 (Mon, 21 Sep 2009) \| 4 lines branches/zip: fix a type in r5935 Should be innodb_open_files, spotted by Michael. ------------------------------------------------------------------------ r5940 \| vasil \| 2009-09-21 01:26:04 -0400 (Mon, 21 Sep 2009) \| 4 lines branches/zip: Add ChangeLog entries for c5938. ------------------------------------------------------------------------ r5938 \| calvin \| 2009-09-19 03:14:25 -0400 (Sat, 19 Sep 2009) \| 41 lines branches/zip: Merge revisions 2584:2956 from branches/6.0, except c2932. Bug#37232 and bug#31183 were fixed in the 6.0 branch only. They should be fixed in the plugin too, specially MySQL 6.0 is discontinued at this point. ------------------------------------------------------------------------ r2604 \| inaam \| 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) \| 8 lines branches/6.0 bug#37232 Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1. Now SELECT on t1 is performed as a consistent read when the isolation level is set to READ COMMITTED. Reviewed by: Heikki ------------------------------------------------------------------------ r2605 \| inaam \| 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) \| 7 lines branches/6.0 Added a comment to clarify why distinct calls to read MySQL binary log file name and log position do not entail any race condition. Suggested by: Heikki ------------------------------------------------------------------------ r2956 \| inaam \| 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) \| 11 lines branches/6.0 bug#31183 If the system tablespace runs out of space because 'autoextend' is not specified with innodb_data_file_path there was no error message printed to the error log. The client would get 'table full' error. This patch prints an appropriate error message to the error log. rb://43 Approved by: Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5935 \| calvin \| 2009-09-18 17:08:02 -0400 (Fri, 18 Sep 2009) \| 6 lines branches/zip: fix bug#44338; minor non-functional changes Bug#44338 innodb has message about non-existing option innodb_max_files_open. Change the option to innodb_open_files. The fix was committed into 6.0 branch. ------------------------------------------------------------------------ r5934 \| vasil \| 2009-09-18 13:06:46 -0400 (Fri, 18 Sep 2009) \| 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5924 \| vasil \| 2009-09-18 00:59:30 -0400 (Fri, 18 Sep 2009) \| 4 lines branches/zip: White space and formatting cleanup in the ChangeLog ------------------------------------------------------------------------ r5922 \| marko \| 2009-09-17 02:32:08 -0400 (Thu, 17 Sep 2009) \| 4 lines branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3. Apparently, the definition of compressBound() has slightly changed. This has been filed as Mantis Issue #345. ------------------------------------------------------------------------ r5920 \| vasil \| 2009-09-16 14:47:22 -0400 (Wed, 16 Sep 2009) \| 4 lines branches/zip: Add ChangeLog entries for r5916. ------------------------------------------------------------------------ r5919 \| vasil \| 2009-09-16 14:37:13 -0400 (Wed, 16 Sep 2009) \| 4 lines branches/zip: Whitespace cleanup in the ChangeLog. ------------------------------------------------------------------------ r5917 \| marko \| 2009-09-16 05:56:23 -0400 (Wed, 16 Sep 2009) \| 1 line branches/zip: innobase_get_cset_width(): Cache the value of current_thd. ------------------------------------------------------------------------ r5916 \| marko \| 2009-09-16 05:54:43 -0400 (Wed, 16 Sep 2009) \| 128 lines branches/zip: Merge revisions 5622:5912 from branches/5.1, except r5700 (changes to CMakeLists.txt) ------------------------------------------------------------------------ r5622 \| vasil \| 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) \| 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ r5740 \| jyang \| 2009-09-03 06:33:47 +0300 (Thu, 03 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Sunny Bains. ------------------------------------------------------------------------ r5741 \| jyang \| 2009-09-03 07:16:01 +0300 (Thu, 03 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5757 \| jyang \| 2009-09-04 04:26:13 +0300 (Fri, 04 Sep 2009) \| 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h D /branches/5.1/mysql-test/innodb_bug46000.result D /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Revert change in 5740. Making the fix in a subsequent check in. ------------------------------------------------------------------------ r5760 \| jyang \| 2009-09-04 07:07:34 +0300 (Fri, 04 Sep 2009) \| 3 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc D /branches/5.1/mysql-test/innodb_bug44369.result D /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: This is to revert change 5741. A return status for create_table_def() needs to be fixed. ------------------------------------------------------------------------ r5797 \| calvin \| 2009-09-09 18:26:29 +0300 (Wed, 09 Sep 2009) \| 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: merge change from 5.1.38 HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. ------------------------------------------------------------------------ r5799 \| calvin \| 2009-09-09 20:47:31 +0300 (Wed, 09 Sep 2009) \| 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: fix bug#46256 Allow tables to be dropped even if the collation is not found, but issue a warning. Could not find an easy way to add mysql-test since it requires changes to charsets and restarting the server. Tests were executed manually. Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5805 \| vasil \| 2009-09-10 08:41:48 +0300 (Thu, 10 Sep 2009) \| 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix a compilation warning caused by c5799: handler/ha_innodb.cc: In function 'void innobase_get_cset_width(ulint, ulint, ulint)': handler/ha_innodb.cc:830: warning: format '%d' expects type 'int', but argument 2 has type 'ulint' ------------------------------------------------------------------------ r5834 \| jyang \| 2009-09-11 00:43:05 +0300 (Fri, 11 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5895 \| jyang \| 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) \| 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Marko Makela. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5910 \| marko \| 2009-09-16 04:07:21 -0400 (Wed, 16 Sep 2009) \| 9 lines branches/zip: Introduce UNIV_LOG_LSN_DEBUG and MLOG_LSN for redo log diagnostics. This was written in order to better track down Issue #313 in InnoDB Hot Backup. MLOG_LSN: A new redo log entry type, for recording the current log sequence number (LSN). This will be checked in an assertion in recv_parse_log_rec(). rb://161, discussed with Sunny and Vasil. ------------------------------------------------------------------------ r5899 \| marko \| 2009-09-15 07:26:01 -0400 (Tue, 15 Sep 2009) \| 4 lines branches/zip: ut0ut.h: Do not #include "os0sync.h" #ifdef UNIV_HOTBACKUP. Since r5872, the InnoDB Hot Backup build was broken. Fix it by not defining any thread synchronization primitives in ut0ut.h. InnoDB Hot Backup is a single-threaded program. ------------------------------------------------------------------------ r5898 \| marko \| 2009-09-15 06:18:50 -0400 (Tue, 15 Sep 2009) \| 2 lines branches/zip: Add /.dirstamp to svn:ignore, for https://svn.innodb.com/svn/hotbackup/branches/3.5 ------------------------------------------------------------------------ r5897 \| marko \| 2009-09-15 04:29:00 -0400 (Tue, 15 Sep 2009) \| 8 lines branches/zip: Avoid bogus messages about latching order violations when UNIV_SYNC_DEBUG is defined. sync_thread_levels_g(): Add the parameter "warn". Do not print anything unless it is set. sync_thread_add_level(): Pass warn=TRUE to sync_thread_levels_g() when the check is within an assertion; FALSE if it is not. ------------------------------------------------------------------------ r5893 \| inaam \| 2009-09-14 11:20:48 -0400 (Mon, 14 Sep 2009) \| 10 lines branches/zip rb://159 In case of pages that are not made young the counter is incremented only when the page in question is 'old'. In case of pages that are made young the counter is incremented in case of all pages. For apple to apple comparison this patch changes the 'young-making' counter to consider only 'old' blocks. Approved by: Marko ------------------------------------------------------------------------ r5889 \| vasil \| 2009-09-14 05:17:18 -0400 (Mon, 14 Sep 2009) \| 5 lines branches/zip: Add missing return statement in the test program that could have caused a warning. ------------------------------------------------------------------------ r5888 \| vasil \| 2009-09-14 04:38:45 -0400 (Mon, 14 Sep 2009) \| 40 lines branches/zip: Back-merge c5880 and c5881 from branches/embedded-1.0: ------------------------------------------------------------------------ r5880 \| vasil \| 2009-09-12 17:28:44 +0300 (Sat, 12 Sep 2009) \| 18 lines Changed paths: M /branches/embedded-1.0/configure.in M /branches/embedded-1.0/include/os0sync.h M /branches/embedded-1.0/srv/srv0start.c branches/embedded-1.0: Clean up and simplify the code that surrounds the atomic ops: Simplify the code that prints what atomics are used: Instead of repeating the same conditions on which each atomics are used use just one printf that prints a variable defined by the code which chooses what atomics to use. * In os0sync.h pick up each atomic variant only if it has been selected by autoconf (based on IB_ATOMIC_MODE_* macros). Define the startup message to be printed. * In configure.in: check what user has chosen and if he has chosen something that is not available, emit an error. If nothing has been chosen explicitly by the user, auto select an option according to the described logic in configure.in. ------------------------------------------------------------------------ r5881 \| vasil \| 2009-09-12 20:08:27 +0300 (Sat, 12 Sep 2009) \| 4 lines Changed paths: M /branches/embedded-1.0/configure.in branches/embedded-1.0: Fix syntax error in test program. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5875 \| vasil \| 2009-09-12 08:11:25 -0400 (Sat, 12 Sep 2009) \| 4 lines branches/zip: Remove unnecessary macro. ------------------------------------------------------------------------ r5872 \| vasil \| 2009-09-12 05:35:17 -0400 (Sat, 12 Sep 2009) \| 5 lines branches/zip: Explicitly include os0sync.h to the places where HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are used to avoid potential problems. ------------------------------------------------------------------------ r5871 \| vasil \| 2009-09-12 05:25:44 -0400 (Sat, 12 Sep 2009) \| 6 lines branches/zip: Rename HAVE_SOLARIS_ATOMICS to HAVE_IB_SOLARIS_ATOMICS and IB_HAVE_PAUSE_INSTRUCTION to HAVE_IB_PAUSE_INSTRUCTION so they all follow the same HAVE_IB_* convention. ------------------------------------------------------------------------ r5870 \| vasil \| 2009-09-12 05:13:44 -0400 (Sat, 12 Sep 2009) \| 7 lines branches/zip: Define HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS in os0sync.h instead of in univ.i. The code expects os_() macros to be present if HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are defined. So define them next to defining the os_() macros. ------------------------------------------------------------------------ r5869 \| vasil \| 2009-09-12 04:33:11 -0400 (Sat, 12 Sep 2009) \| 15 lines branches/zip: Include ut0auxconf.h only if none of the macros it would define is defined. The check when to include this header was outdated from the time when there was only one macro involved. Move the atomics checks that are in univ.i outside of #if windows ... #else ... #endif This simplifies the code and removes some duplicates like defining HAVE_ATOMIC_BUILTINS if HAVE_WINDOWS_ATOMICS is defined in both branches. Do not define the same macro HAVE_ATOMIC_PTHREAD_T for different events. Instead define HAVE_IB_ATOMIC_PTHREAD_T_GCC and HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS. ------------------------------------------------------------------------ r5868 \| vasil \| 2009-09-12 04:01:17 -0400 (Sat, 12 Sep 2009) \| 6 lines branches/zip: Move the check whether to include ut0auxconf.h before everything because we are now even checking for GCC atomics, we relied on MySQL to define this macro before. ------------------------------------------------------------------------ r5867 \| vasil \| 2009-09-12 03:43:45 -0400 (Sat, 12 Sep 2009) \| 4 lines branches/zip: Update comment to reflect reality. ------------------------------------------------------------------------ r5866 \| vasil \| 2009-09-12 03:30:08 -0400 (Sat, 12 Sep 2009) \| 5 lines branches/zip: Add the check for GCC atomics to ut0auxconf* (copied from plug.in) because we no longer rely on MySQL's HAVE_GCC_ATOMIC_BUILTINS. ------------------------------------------------------------------------ r5865 \| vasil \| 2009-09-12 03:26:03 -0400 (Sat, 12 Sep 2009) \| 10 lines branches/zip: Simplify the compile time checks by splittig them into 5 independent checks: * Whether GCC atomics are available * Whether pthread_t can be used by GCC atomics * Whether Solaris libc atomics are available * Whether pthread_t can be used by Solaris libs atomics * Checking the size of pthread_t ------------------------------------------------------------------------ r5864 \| vasil \| 2009-09-12 03:22:55 -0400 (Sat, 12 Sep 2009) \| 4 lines branches/zip: Include string.h which is needed for memset(). ------------------------------------------------------------------------ r5863 \| vasil \| 2009-09-12 03:07:08 -0400 (Sat, 12 Sep 2009) \| 10 lines branches/zip: Check that pthread_t can indeed be passed to Solaris atomic functions, instead of assuming that it can be passed if 0 can be assigned to it. It could be that: * 0 can be assigned, but pthread_t cannot be passed and * 0 cannot be assigned but pthread_t can be passed Better to check what we are interested in, not something else and make assumptions. ------------------------------------------------------------------------ r5858 \| vasil \| 2009-09-11 13:46:47 -0400 (Fri, 11 Sep 2009) \| 4 lines branches/zip: Fix the indentation of the closing bracket. ------------------------------------------------------------------------ r5826 \| marko \| 2009-09-10 07:29:46 -0400 (Thu, 10 Sep 2009) \| 12 lines branches/zip: Roll back recovered dictionary transactions before dropping incomplete indexes (Issue #337). trx_rollback_or_clean_recovered(ibool all): New function, split from trx_rollback_or_clean_all_recovered(). all==FALSE will only roll back dictionary transactions. recv_recovery_from_checkpoint_finish(): Call trx_rollback_or_clean_recovered(FALSE) before row_merge_drop_temp_indexes(). rb://158 approved by Sunny Bains ------------------------------------------------------------------------ r5825 \| marko \| 2009-09-10 06:47:09 -0400 (Thu, 10 Sep 2009) \| 20 lines branches/zip: Reduce mutex contention that was introduced when addressing Bug #45015 (Issue #316), in r5703. buf_page_set_accessed_make_young(): New auxiliary function, called by buf_page_get_zip(), buf_page_get_gen(), buf_page_optimistic_get_func(). Call ut_time_ms() outside of buf_pool_mutex. Use cached access_time. buf_page_set_accessed(): Add the parameter time_ms, so that ut_time_ms() need not be called while holding buf_pool_mutex. buf_page_optimistic_get_func(), buf_page_get_known_nowait(): Read buf_page_t::access_time without holding buf_pool_mutex. This should be OK, because the field is only used for heuristic purposes. buf_page_peek_if_too_old(): If buf_pool->freed_page_clock == 0, return FALSE, so that we will not waste time moving blocks in the LRU list in the warm-up phase or when the workload fits in the buffer pool. rb://156 approved by Sunny Bains ------------------------------------------------------------------------ r5822 \| marko \| 2009-09-10 06:10:20 -0400 (Thu, 10 Sep 2009) \| 1 line branches/zip: buf_page_release(): De-stutter the function comment. ------------------------------------------------------------------------ r5804 \| marko \| 2009-09-10 01:29:31 -0400 (Thu, 10 Sep 2009) \| 1 line branches/zip: trx_cleanup_at_db_startup(): Fix a typo in comment. ------------------------------------------------------------------------ r5798 \| calvin \| 2009-09-09 11:28:10 -0400 (Wed, 09 Sep 2009) \| 5 lines branches/zip: HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. But the plugin should still work with previous versions of MySQL. ------------------------------------------------------------------------ r5792 \| vasil \| 2009-09-09 09:35:58 -0400 (Wed, 09 Sep 2009) \| 32 lines branches/zip: Fix a bug in manipulating the variable innodb_old_blocks_pct: for any value assigned it got that value -1, except for 75. When assigned 75, it got 75. mysql> set global innodb_old_blocks_pct=15; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ \| Variable_name \| Value \| +-----------------------+-------+ \| innodb_old_blocks_pct \| 14 \| +-----------------------+-------+ 1 row in set (0.00 sec) mysql> set global innodb_old_blocks_pct=75; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ \| Variable_name \| Value \| +-----------------------+-------+ \| innodb_old_blocks_pct \| 75 \| +-----------------------+-------+ After the fix it gets exactly what was assigned. Approved by: Marko (via IM) ------------------------------------------------------------------------ r5783 \| marko \| 2009-09-09 03:25:00 -0400 (Wed, 09 Sep 2009) \| 1 line branches/zip: buf_page_is_accessed(): Correct the function comment. ------------------------------------------------------------------------ r5782 \| marko \| 2009-09-09 03:00:59 -0400 (Wed, 09 Sep 2009) \| 2 lines branches/zip: buf_page_peek_if_too_old(): Silence a compiler warning that was introduced in r5779 on 32-bit systems. ------------------------------------------------------------------------ r5780 \| marko \| 2009-09-09 02:50:50 -0400 (Wed, 09 Sep 2009) \| 1 line branches/zip: ut_time_ms(): Return ulint, not uint. ------------------------------------------------------------------------ r5779 \| marko \| 2009-09-09 02:17:19 -0400 (Wed, 09 Sep 2009) \| 2 lines branches/zip: buf_page_peek_if_too_old(): Make the bitmasking work when buf_pool->freed_page_clock is wider than 32 bits. ------------------------------------------------------------------------ r5777 \| marko \| 2009-09-08 11:50:25 -0400 (Tue, 08 Sep 2009) \| 2 lines branches/zip: Remove BUF_LRU_INITIAL_RATIO, which should have been removed together with buf_LRU_get_recent_limit(). ------------------------------------------------------------------------ r5775 \| calvin \| 2009-09-07 17:15:05 -0400 (Mon, 07 Sep 2009) \| 13 lines branches/zip: Build InnoDB on Windows with UNIV_HOTBACKUP The changes are non-functional changes for normal InnoDB, but needed for building the Hot Backup on Windows (with UNIV_HOTBACKUP defined). - Define os_aio_use_native_aio for HB. - Do not acquire seek mutexes for backup since HB is single threaded. - Do not use srv_flush_log_at_trx_commit for HB build rb://155 Approved by: Marko ------------------------------------------------------------------------ r5752 \| marko \| 2009-09-03 10:55:51 -0400 (Thu, 03 Sep 2009) \| 10 lines branches/zip: recv_recover_page_func(): Write the log sequence number to the compressed page, if there is one. Previously, the function only wrote the LSN to the uncompressed page. It is not clear why recv_recover_page_func() is updating FIL_PAGE_LSN in the buffer pool. The log sequence number will be stamped on the page when it is flushed to disk, in buf_flush_init_for_writing(). I noticed this inconsistency when analyzing Issue #313, but this patch does not fix it. That is no surprise, since FIL_PAGE_LSN should only matter on disk files, not in the buffer pool. ------------------------------------------------------------------------ r5751 \| marko \| 2009-09-03 10:36:15 -0400 (Thu, 03 Sep 2009) \| 7 lines branches/zip: row_merge(): Remove a bogus debug assertion that was triggered when creating an index on an empty table. row_merge_sort(): Add debug assertions and comments that justify the loop termination condition. The bogus assertion ut_ad(ihalf > 0) was reported by Michael. ------------------------------------------------------------------------ r5748 \| marko \| 2009-09-03 07:05:44 -0400 (Thu, 03 Sep 2009) \| 1 line branches/zip: MLOG_MULTI_REC_END: Correct the comment. ------------------------------------------------------------------------ r5747 \| marko \| 2009-09-03 06:46:38 -0400 (Thu, 03 Sep 2009) \| 2 lines branches/zip: recv_scan_log_recs(): Replace while with do...while, because the termination condition will always hold on the first iteration. ------------------------------------------------------------------------ r5746 \| marko \| 2009-09-03 04:55:36 -0400 (Thu, 03 Sep 2009) \| 2 lines branches/zip: log_reserve_and_write_fast(): Do not cache the log_sys pointer in a local variable. ------------------------------------------------------------------------ r5745 \| marko \| 2009-09-03 04:38:22 -0400 (Thu, 03 Sep 2009) \| 2 lines branches/zip: log_check_log_recs(): Enclose in #ifdef UNIV_LOG_DEBUG. Add const qualifiers. ------------------------------------------------------------------------ r5744 \| marko \| 2009-09-03 04:28:35 -0400 (Thu, 03 Sep 2009) \| 1 line branches/zip: ut_align(): Make ptr const, like in ut_align_down(). ------------------------------------------------------------------------ r5743 \| marko \| 2009-09-03 02:36:12 -0400 (Thu, 03 Sep 2009) \| 3 lines branches/zip: log_reserve_and_write_fast(): Remove the redundant output parameter "success". Success is also indicated by a nonzero return value. ------------------------------------------------------------------------ r5736 \| marko \| 2009-09-02 03:53:19 -0400 (Wed, 02 Sep 2009) \| 1 line branches/zip: Enclose some timestamp functions in #ifndef UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5735 \| marko \| 2009-09-02 03:43:09 -0400 (Wed, 02 Sep 2009) \| 2 lines branches/zip: univ.i: Do not undefine PACKAGE or VERSION. InnoDB source code does not refer to these macros. ------------------------------------------------------------------------ r5734 \| sunny \| 2009-09-02 03:08:45 -0400 (Wed, 02 Sep 2009) \| 2 lines branches/zip: Update ChangeLog with r5733 changes. ------------------------------------------------------------------------ r5733 \| sunny \| 2009-09-02 03:05:15 -0400 (Wed, 02 Sep 2009) \| 6 lines branches/zip: Fix a regression introduced by the fix for bug#26316. We check whether a transaction holds any AUTOINC locks before we acquire the kernel mutex and release those locks. Fix for rb://153. Approved by Marko. ------------------------------------------------------------------------ r5716 \| vasil \| 2009-08-31 03:47:49 -0400 (Mon, 31 Aug 2009) \| 9 lines branches/zip: Fix Bug#46718 InnoDB plugin incompatible with gcc 4.1 (at least: on PPC): "Undefined symbol" by implementing our own check in plug.in instead of using the result from the check from MySQL because it is insufficient. Approved by: Marko (rb://154) ------------------------------------------------------------------------ r5714 \| marko \| 2009-08-31 02:10:10 -0400 (Mon, 31 Aug 2009) \| 5 lines branches/zip: buf_chunk_not_freed(): Do not acquire block->mutex unless block->page.state == BUF_BLOCK_FILE_PAGE. Check that block->page.state makes sense. Approved by Sunny Bains over the IM. ------------------------------------------------------------------------ r5709 \| inaam \| 2009-08-28 02:22:46 -0400 (Fri, 28 Aug 2009) \| 5 lines branches/zip rb://152 Disable display of deprecated parameter innodb_file_io_threads in 'show variables'. ------------------------------------------------------------------------ r5708 \| inaam \| 2009-08-27 18:43:32 -0400 (Thu, 27 Aug 2009) \| 4 lines branches/zip Remove redundant TRUE : FALSE from the return statement ------------------------------------------------------------------------ r5707 \| inaam \| 2009-08-27 12:20:35 -0400 (Thu, 27 Aug 2009) \| 6 lines branches/zip Remove unused macros as we erased the random readahead code in r5703. Also fixed some comments. ------------------------------------------------------------------------ r5706 \| inaam \| 2009-08-27 12:00:27 -0400 (Thu, 27 Aug 2009) \| 20 lines branches/zip rb://147 Done away with following two status variables: innodb_buffer_pool_read_ahead_rnd innodb_buffer_pool_read_ahead_seq Introduced two new status variables: innodb_buffer_pool_read_ahead = number of pages read as part of readahead since server startup innodb_buffer_pool_read_ahead_evicted = number of pages that are read in as readahead but were evicted before ever being accessed since server startup i.e.: a measure of how badly our readahead is performing SHOW INNODB STATUS will show two extra numbers in buffer pool section: pages read ahead/sec and pages evicted without access/sec Approved by: Marko ------------------------------------------------------------------------ r5705 \| marko \| 2009-08-27 07:56:24 -0400 (Thu, 27 Aug 2009) \| 11 lines branches/zip: dict_index_find_cols(): On column name lookup failure, return DB_CORRUPTION (HA_ERR_CRASHED) instead of abnormally terminating the server. Also, disable the previously added diagnostic output to the error log, because mysql-test-run does not like extra output in the error log. (Bug #44571) dict_index_add_to_cache(): Handle errors from dict_index_find_cols(). mysql-test/innodb_bug44571.test: A test case for triggering the bug. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5704 \| marko \| 2009-08-27 04:31:17 -0400 (Thu, 27 Aug 2009) \| 32 lines branches/zip: Fix a critical bug in fast index creation that could corrupt the created indexes. row_merge(): Make "half" an in/out parameter. Determine the offset of half the output file. Copy the last blocks record-by-record instead of block-by-block, so that the records can be counted. Check that the input and output have matching n_rec. row_merge_sort(): Do not assume that two blocks of size N are merged into a block of size 2N. The output block can be shorter than the input if the last page of each input block is almost empty. Use an accurate termination condition, based on the "half" computed by row_merge(). row_merge_read(), row_merge_write(), row_merge_blocks(): Add debug output. merge_file_t, row_merge_file_create(): Add n_rec, the number of records in the merge file. row_merge_read_clustered_index(): Update n_rec. row_merge_blocks(): Update and check n_rec. row_merge_blocks_copy(): New function, for copying the last blocks in row_merge(). Update and check n_rec. This bug was discovered with a user-supplied test case that creates an index where the initial temporary file is 249 one-megabyte blocks and the merged files become smaller. In the test, possible merge record sizes are 10, 18, and 26 bytes. rb://150 approved by Sunny Bains. This addresses Issue #320. ------------------------------------------------------------------------ r5703 \| marko \| 2009-08-27 03:25:00 -0400 (Thu, 27 Aug 2009) \| 41 lines branches/zip: Replace the constant 3/8 ratio that controls the LRU_old size with the settable global variable innodb_old_blocks_pct. The minimum and maximum values are 5 and 95 per cent, respectively. The default is 1003/8, in line with the old behavior. ut_time_ms(): New utility function, to return the current time in milliseconds. TODO: Is there a more efficient timestamp function, such as rdtsc divided by a power of two? buf_LRU_old_threshold_ms: New variable, corresponding to innodb_old_blocks_time. The value 0 is the default behaviour: no timeout before making blocks 'new'. bpage->accessed, bpage->LRU_position, buf_pool->ulint_clock: Remove. bpage->access_time: New field, replacing bpage->accessed. Protected by buf_pool_mutex instead of bpage->mutex. Updated when a page is created or accessed the first time in the buffer pool. buf_LRU_old_ratio, innobase_old_blocks_pct: New variables, corresponding to innodb_old_blocks_pct buf_LRU_old_ratio_update(), innobase_old_blocks_pct_update(): Update functions for buf_LRU_old_ratio, innobase_old_blocks_pct. buf_page_peek_if_too_old(): Compare ut_time_ms() to bpage->access_time if buf_LRU_old_threshold_ms && bpage->old. Else observe buf_LRU_old_ratio and bpage->freed_page_clock. buf_pool_t: Add n_pages_made_young, n_pages_not_made_young, n_pages_made_young_old, n_pages_not_made_young, for statistics. buf_print(): Display buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is only for crash diagnostics. buf_print_io(): Display buf_pool->LRU_old_len and quantities derived from buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is invoked by SHOW ENGINE INNODB STATUS. rb://129 approved by Heikki Tuuri. This addresses Bug #45015. ------------------------------------------------------------------------ r5702 \| marko \| 2009-08-27 03:03:15 -0400 (Thu, 27 Aug 2009) \| 1 line branches/zip: Document also the files affected by r5698 in the ChangeLog. ------------------------------------------------------------------------ r5701 \| marko \| 2009-08-27 03:01:42 -0400 (Thu, 27 Aug 2009) \| 1 line branches/zip: Document r5698 in the ChangeLog. ------------------------------------------------------------------------ r5698 \| inaam \| 2009-08-26 10:34:35 -0400 (Wed, 26 Aug 2009) \| 13 lines branches/zip bug#42885 rb://148 The call to put IO threads to sleep was most probably meant for Windows only as the comment in buf0rea.c suggests. However it was enabled on all platforms. This patch restricts the sleep call to windows. This approach of not putting threads to sleep makes even more sense because now we have multiple threads working in the background and it probably is not a good idea to put all of them to sleep because a user thread wants to post a batch for readahead. Approved by: Marko ------------------------------------------------------------------------ r5697 \| vasil \| 2009-08-26 09:44:40 -0400 (Wed, 26 Aug 2009) \| 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5696 \| vasil \| 2009-08-26 09:15:59 -0400 (Wed, 26 Aug 2009) \| 14 lines branches/zip: Merge a change from MySQL: http://lists.mysql.com/commits/80832 2968 Jonathan Perkin 2009-08-14 Build fixes for Windows, AIX, HP/UX and Sun Studio11, from Timothy Smith. modified: CMakeLists.txt cmd-line-utils/readline/util.c storage/innodb_plugin/handler/i_s.cc storage/innodb_plugin/include/univ.i ------------------------------------------------------------------------ r5695 \| marko \| 2009-08-26 09:14:59 -0400 (Wed, 26 Aug 2009) \| 1 line branches/zip: UNIV_DEBUG_LOCK_VALIDATE: Move the definition to univ.i. ------------------------------------------------------------------------ r5694 \| marko \| 2009-08-26 07:25:26 -0400 (Wed, 26 Aug 2009) \| 2 lines branches/zip: buf_page_t: Clarify that bpage->list may contain garbage. This comment was provoked by Inaam. ------------------------------------------------------------------------ r5687 \| vasil \| 2009-08-20 05:20:22 -0400 (Thu, 20 Aug 2009) \| 8 lines branches/zip: ChangeLog: Follow the convention from the rest of the ChangeLog: for bugfixes from bugs.mysql.com only the bug number and title goes in the ChangeLog. Detailed explanation on what is the problem and how it was fixed is present in the bugs database. ------------------------------------------------------------------------ r5686 \| vasil \| 2009-08-20 05:15:05 -0400 (Thu, 20 Aug 2009) \| 4 lines branches/zip: White-space fixup. ------------------------------------------------------------------------ r5685 \| sunny \| 2009-08-20 04:18:29 -0400 (Thu, 20 Aug 2009) \| 2 lines branches/zip: Update the ChangeLog with r5684 change. ------------------------------------------------------------------------ r5684 \| sunny \| 2009-08-20 04:05:30 -0400 (Thu, 20 Aug 2009) \| 10 lines branches/zip: Fix bug# 46650: Innodb assertion autoinc_lock == lock in lock_table_remove_low on INSERT SELECT We only store the autoinc locks that are granted in the transaction's autoinc lock vector. A transacton, that has been rolled back due to a deadlock because of an AUTOINC lock attempt, will not have added that lock to the vector. We need to check for that when we remove that lock. rb://145 Approved by Marko. ------------------------------------------------------------------------ r5681 \| sunny \| 2009-08-14 02:16:24 -0400 (Fri, 14 Aug 2009) \| 3 lines branches/zip: When building HotBackup srv_use_sys_malloc is #ifdef out. We move access to the this variable within a !UNIV_HOTBACKUP block. ------------------------------------------------------------------------ r5671 \| marko \| 2009-08-13 04:46:33 -0400 (Thu, 13 Aug 2009) \| 5 lines branches/zip: ha_innobase::add_index(): Fix Bug #46557: after a successful operation, read innodb_table->flags from the newly created table object, not from the old one that was just freed. Approved by Sunny. ------------------------------------------------------------------------ r5670 \| marko \| 2009-08-12 09:16:37 -0400 (Wed, 12 Aug 2009) \| 2 lines branches/zip: trx_undo_rec_copy(): Add const qualifier to undo_rec. This is a non-functional change. ------------------------------------------------------------------------ r5663 \| marko \| 2009-08-11 07:42:37 -0400 (Tue, 11 Aug 2009) \| 2 lines branches/zip: trx_general_rollback_for_mysql(): Remove the redundant parameter partial. If savept==NULL, partial==FALSE. ------------------------------------------------------------------------ r5662 \| marko \| 2009-08-11 05:54:16 -0400 (Tue, 11 Aug 2009) \| 1 line branches/zip: Bump the version number to 1.0.5 after releasing 1.0.4. ------------------------------------------------------------------------ r5642 \| calvin \| 2009-08-06 19:04:03 -0400 (Thu, 06 Aug 2009) \| 2 lines branches/zip: remove duplicate "the" in comments. ------------------------------------------------------------------------ r5639 \| marko \| 2009-08-06 06:39:34 -0400 (Thu, 06 Aug 2009) \| 3 lines branches/zip: mem_heap_block_free(): If innodb_use_sys_malloc is set, do not tell Valgrind that the memory is free, to avoid a bogus warning in Valgrind's built-in free() hook. ------------------------------------------------------------------------ r5636 \| marko \| 2009-08-05 08:27:30 -0400 (Wed, 05 Aug 2009) \| 2 lines branches/zip: lock_rec_validate_page(): Add the parameter zip_size. This should help track down Mantis Issue #289. ------------------------------------------------------------------------ r5635 \| marko \| 2009-08-05 07:06:55 -0400 (Wed, 05 Aug 2009) \| 2 lines branches/zip: Replace <number> with NUMBER in some comments, to avoid problems with Doxygen XML output. ------------------------------------------------------------------------ r5629 \| marko \| 2009-08-04 07:42:44 -0400 (Tue, 04 Aug 2009) \| 1 line branches/zip: mysql-test: Pass MTR's internal checks. ------------------------------------------------------------------------ r5626 \| vasil \| 2009-08-04 01:53:31 -0400 (Tue, 04 Aug 2009) \| 4 lines branches/zip: Revert the dummy change from c5625. ------------------------------------------------------------------------ r5625 \| vasil \| 2009-08-04 01:52:48 -0400 (Tue, 04 Aug 2009) \| 32 lines branches/zip: Merge 5518:5622 from branches/5.1, resolving conflict in r5622 (after resolving the conflict Makefile.am was not changed so I have made a dummy change so I can commit and thus record that branches/5.1 has been merged in branches/zip up to 5622): ------------------------------------------------------------------------ r5622 \| vasil \| 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) \| 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5614 \| vasil \| 2009-07-31 11:09:07 -0400 (Fri, 31 Jul 2009) \| 6 lines branches/zip: Add fsp0types.h to the list of noinst_HEADERS Suggested by: Sergey Vojtovich <svoj@sun.com> ------------------------------------------------------------------------ r5539 \| vasil \| 2009-07-21 06:28:27 -0400 (Tue, 21 Jul 2009) \| 4 lines branches/zip: Add a test program to check whether the PAUSE instruction is available. ------------------------------------------------------------------------ r5537 \| vasil \| 2009-07-21 05:31:26 -0400 (Tue, 21 Jul 2009) \| 5 lines branches/zip: Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per line. ------------------------------------------------------------------------ r5527 \| sunny \| 2009-07-20 17:56:30 -0400 (Mon, 20 Jul 2009) \| 2 lines branches/zip: For HotBackup builds we don't want to hide the symbols. ------------------------------------------------------------------------ r5525 \| calvin \| 2009-07-20 13:14:30 -0400 (Mon, 20 Jul 2009) \| 2 lines branches/zip: add ChangeLog entry for r5524. ------------------------------------------------------------------------	16 years ago
marko	09c2196b91	branches/zip: Introduce UNIV_LOG_LSN_DEBUG and MLOG_LSN for redo log diagnostics. This was written in order to better track down Issue #313 in InnoDB Hot Backup. MLOG_LSN: A new redo log entry type, for recording the current log sequence number (LSN). This will be checked in an assertion in recv_parse_log_rec(). rb://161, discussed with Sunny and Vasil.	16 years ago
marko	d6faf6c464	branches/zip: Introduce UNIV_LOG_LSN_DEBUG and MLOG_LSN for redo log diagnostics. This was written in order to better track down Issue #313 in InnoDB Hot Backup. MLOG_LSN: A new redo log entry type, for recording the current log sequence number (LSN). This will be checked in an assertion in recv_parse_log_rec(). rb://161, discussed with Sunny and Vasil.	16 years ago
Aleksandr Kuzminsky	222507900c	sync with rev.96	16 years ago
marko	3544592fbd	branches/zip: log_reserve_and_write_fast(): Do not cache the log_sys pointer in a local variable.	16 years ago
marko	932c00c32c	branches/zip: log_reserve_and_write_fast(): Do not cache the log_sys pointer in a local variable.	16 years ago
marko	176e8327f1	branches/zip: log_check_log_recs(): Enclose in #ifdef UNIV_LOG_DEBUG. Add const qualifiers.	16 years ago
marko	92e8d1b2b6	branches/zip: log_check_log_recs(): Enclose in #ifdef UNIV_LOG_DEBUG. Add const qualifiers.	16 years ago
marko	a9458f49c7	branches/zip: log_reserve_and_write_fast(): Remove the redundant output parameter "success". Success is also indicated by a nonzero return value.	16 years ago
marko	2ee3352082	branches/zip: log_reserve_and_write_fast(): Remove the redundant output parameter "success". Success is also indicated by a nonzero return value.	16 years ago
inaam	8a3ea85c92	branches/innodb+: Merge revisions 5144:5524 from branches/zip ------------------------------------------------------------------------ r5147 \| marko \| 2009-05-27 06:55:14 -0400 (Wed, 27 May 2009) \| 1 line branches/zip: ibuf0ibuf.c: Improve a comment. ------------------------------------------------------------------------ r5149 \| marko \| 2009-05-27 07:46:42 -0400 (Wed, 27 May 2009) \| 34 lines branches/zip: Merge revisions 4994:5148 from branches/5.1: ------------------------------------------------------------------------ r5126 \| vasil \| 2009-05-26 16:57:12 +0300 (Tue, 26 May 2009) \| 9 lines branches/5.1: Preparation for the fix of Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Non-functional change: move FSP_* macros from fsp0fsp.h to a new file fsp0types.h. This is needed in order to be able to use FSP_EXTENT_SIZE in mtr0log.ic. ------------------------------------------------------------------------ r5127 \| vasil \| 2009-05-26 17:05:43 +0300 (Tue, 26 May 2009) \| 9 lines branches/5.1: Preparation for the fix of Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Do not include unnecessary headers mtr0log.h and fut0lst.h in trx0sys.h and include fsp0fsp.h just before it is needed. This is needed in order to be able to use TRX_SYS_SPACE in mtr0log.ic. ------------------------------------------------------------------------ r5128 \| vasil \| 2009-05-26 17:26:37 +0300 (Tue, 26 May 2009) \| 7 lines branches/5.1: Fix Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Do not write redo log for the pages in the doublewrite buffer. Also, do not make a dummy change to the page because this is not needed. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5169 \| marko \| 2009-05-28 03:21:55 -0400 (Thu, 28 May 2009) \| 1 line branches/zip: mtr0mtr.h: Add Doxygen comments for the redo log entry types. ------------------------------------------------------------------------ r5176 \| marko \| 2009-05-28 07:14:02 -0400 (Thu, 28 May 2009) \| 1 line branches/zip: Correct a debug assertion that was added in r5125. ------------------------------------------------------------------------ r5201 \| marko \| 2009-06-01 06:35:25 -0400 (Mon, 01 Jun 2009) \| 2 lines branches/zip: Clean up some comments. Make the rec parameter of mlog_open_and_write_index() const. ------------------------------------------------------------------------ r5234 \| marko \| 2009-06-03 08:26:41 -0400 (Wed, 03 Jun 2009) \| 44 lines branches/zip: Merge revisions 5148:5233 from branches/5.1: ------------------------------------------------------------------------ r5150 \| vasil \| 2009-05-27 18:56:03 +0300 (Wed, 27 May 2009) \| 4 lines branches/5.1: Whitespace fixup. ------------------------------------------------------------------------ r5191 \| vasil \| 2009-05-30 17:46:05 +0300 (Sat, 30 May 2009) \| 19 lines branches/5.1: Merge a change from MySQL (this fixes the failing innodb_mysql test): ------------------------------------------------------------ revno: 1810.3894.10 committer: Sergey Glukhov <Sergey.Glukhov@sun.com> branch nick: mysql-5.0-bugteam timestamp: Tue 2009-05-19 11:32:21 +0500 message: Bug#39793 Foreign keys not constructed when column has a '#' in a comment or default value Internal InnoDN FK parser does not recognize '\'' as quotation symbol. Suggested fix is to add '\'' symbol check for quotation condition (dict_strip_comments() function). modified: innobase/dict/dict0dict.c mysql-test/r/innodb_mysql.result mysql-test/t/innodb_mysql.test ------------------------------------------------------------------------ r5233 \| marko \| 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) \| 11 lines branches/5.1: Merge the test case from r5232 from branches/5.0: ------------------------------------------------------------------------ r5232 \| marko \| 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) \| 21 lines branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565 (Update Query Results in "1 Row Affected" But Should Be "Zero Rows"). Also, add a test case for Bug #40565. rb://128 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5250 \| marko \| 2009-06-04 02:58:23 -0400 (Thu, 04 Jun 2009) \| 1 line branches/zip: Add Doxygen comments to the rest of buf0. ------------------------------------------------------------------------ r5251 \| marko \| 2009-06-04 02:59:51 -0400 (Thu, 04 Jun 2009) \| 1 line branches/zip: Replace <= in a function comment. ------------------------------------------------------------------------ r5253 \| marko \| 2009-06-04 06:37:35 -0400 (Thu, 04 Jun 2009) \| 1 line branches/zip: Add missing Doxygen comments for page0zip. ------------------------------------------------------------------------ r5261 \| vasil \| 2009-06-05 11:13:31 -0400 (Fri, 05 Jun 2009) \| 15 lines branches/zip: Fix Mantis Issue#244 fix bug in linear read ahead (no check on access pattern) The changes are: 1) Take into account access pattern when deciding whether or not to do linear read ahead. 2) Expose a knob innodb_read_ahead_factor = [0-64] default (8), dynamic, global to control linear read ahead behvior 3) Disable random read ahead. Keep the code for now. Submitted by: Inaam (rb://122) Approved by: Heikki (rb://122) ------------------------------------------------------------------------ r5262 \| vasil \| 2009-06-05 12:04:25 -0400 (Fri, 05 Jun 2009) \| 22 lines branches/zip: Enable functionality to have multiple background io helper threads. This patch is based on percona contributions. More details about this patch will be written at: https://svn.innodb.com/innobase/MultipleBackgroundThreads The patch essentially does the following: expose following knobs: innodb_read_io_threads = [1 - 64] default 1 innodb_write_io_threads = [1 - 64] default 1 deprecate innodb_file_io_threads (this parameter was relevant only on windows) Internally it allows multiple segments for read and write IO request arrays where one thread works on one segement. Submitted by: Inaam (rb://124) Approved by: Heikki (rb://124) ------------------------------------------------------------------------ r5263 \| vasil \| 2009-06-05 12:19:37 -0400 (Fri, 05 Jun 2009) \| 4 lines branches/zip: Whitespace cleanup. ------------------------------------------------------------------------ r5264 \| vasil \| 2009-06-05 12:26:58 -0400 (Fri, 05 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entry for r5261. ------------------------------------------------------------------------ r5265 \| vasil \| 2009-06-05 12:34:11 -0400 (Fri, 05 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entry for r5262. ------------------------------------------------------------------------ r5268 \| inaam \| 2009-06-08 12:18:21 -0400 (Mon, 08 Jun 2009) \| 7 lines branches/zip Non functional change: Added legal notices acknowledging percona contribution to the multiple IO helper threads patch i.e.: r5262 ------------------------------------------------------------------------ r5283 \| inaam \| 2009-06-09 13:46:29 -0400 (Tue, 09 Jun 2009) \| 9 lines branches/zip rb://130 Enable Group Commit functionality that was broken in 5.0 when distributed transactions were introduced. Reviewed by: Heikki ------------------------------------------------------------------------ r5319 \| marko \| 2009-06-11 04:40:33 -0400 (Thu, 11 Jun 2009) \| 3 lines branches/zip: Declare os_thread_id_t as unsigned long, because ulint is wrong on Win64. Pointed out by Vladislav Vaintroub <wlad@sun.com>. ------------------------------------------------------------------------ r5320 \| inaam \| 2009-06-11 09:15:41 -0400 (Thu, 11 Jun 2009) \| 14 lines branches/zip rb://131 This patch changes the following defaults: max_dirty_pages_pct: default from 90 to 75. max allowed from 100 to 99 additional_mem_pool_size: default from 1 to 8 MB buffer_pool_size: default from 8 to 128 MB log_buffer_size: default from 1 to 8 MB read_io_threads/write_io_threads: default from 1 to 4 The log file sizes are untouched because of upgrade issues Reviewed by: Heikki ------------------------------------------------------------------------ r5330 \| marko \| 2009-06-16 04:08:59 -0400 (Tue, 16 Jun 2009) \| 2 lines branches/zip: buf_page_get_gen(): Reduce mutex holding time by adjusting buf_pool->n_pend_unzip while only holding buf_pool_mutex. ------------------------------------------------------------------------ r5331 \| marko \| 2009-06-16 05:00:48 -0400 (Tue, 16 Jun 2009) \| 2 lines branches/zip: buf_page_get_zip(): Eliminate a buf_page_get_mutex() call. The function must switch on the block state anyway. ------------------------------------------------------------------------ r5332 \| vasil \| 2009-06-16 05:03:27 -0400 (Tue, 16 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entries for r5283 and r5320. ------------------------------------------------------------------------ r5333 \| marko \| 2009-06-16 05:27:46 -0400 (Tue, 16 Jun 2009) \| 1 line branches/zip: buf_page_io_query(): Remove unused function. ------------------------------------------------------------------------ r5335 \| marko \| 2009-06-16 09:23:10 -0400 (Tue, 16 Jun 2009) \| 2 lines branches/zip: innodb.test: Adjust the tolerance of innodb_buffer_pool_pages_total for r5320. ------------------------------------------------------------------------ r5342 \| marko \| 2009-06-17 06:15:32 -0400 (Wed, 17 Jun 2009) \| 60 lines branches/zip: Merge revisions 5233:5341 from branches/5.1: ------------------------------------------------------------------------ r5233 \| marko \| 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) \| 11 lines branches/5.1: Merge the test case from r5232 from branches/5.0: ------------------------------------------------------------------------ r5232 \| marko \| 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) \| 21 lines branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565 (Update Query Results in "1 Row Affected" But Should Be "Zero Rows"). Also, add a test case for Bug #40565. rb://128 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5243 \| sunny \| 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) \| 14 lines branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before the bug fix we would assert on missing autoinc columns. With this fix we allow MySQL to open the table but set the next autoinc value for the column to the MAX value. This effectively disables the next value generation. INSERTs will fail with a generic AUTOINC failure. However, the user should be able to read/dump the table, set the column values explicitly, use ALTER TABLE to set the next autoinc value and/or sync the two data dictionaries to resume normal operations. Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the index (PRIMARY) rb://118 ------------------------------------------------------------------------ r5252 \| sunny \| 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) \| 2 lines branches/5.1: The version of the result file checked in was broken in r5243. ------------------------------------------------------------------------ r5259 \| vasil \| 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) \| 7 lines branches/5.1: Remove the word "Error" from the printout because the mysqltest suite interprets it as an error and thus the innodb-autoinc test fails. Approved by: Sunny (via IM) ------------------------------------------------------------------------ r5339 \| marko \| 2009-06-17 11:01:37 +0300 (Wed, 17 Jun 2009) \| 2 lines branches/5.1: Add missing #include "mtr0log.h" so that the code compiles with -DUNIV_MUST_NOT_INLINE. (null merge; this had already been committed in branches/zip) ------------------------------------------------------------------------ r5340 \| marko \| 2009-06-17 12:11:49 +0300 (Wed, 17 Jun 2009) \| 4 lines branches/5.1: row_unlock_for_mysql(): When the clustered index is unknown, refuse to unlock the record. (Bug #45357, caused by the fix of Bug #39320). rb://132 approved by Sunny Bains. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5343 \| vasil \| 2009-06-17 08:56:12 -0400 (Wed, 17 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entry for r5342. ------------------------------------------------------------------------ r5344 \| marko \| 2009-06-17 09:03:45 -0400 (Wed, 17 Jun 2009) \| 1 line branches/zip: row_merge_read_rec(): Fix a UNIV_DEBUG bug (Bug #45426) ------------------------------------------------------------------------ r5391 \| marko \| 2009-06-22 05:31:35 -0400 (Mon, 22 Jun 2009) \| 2 lines branches/zip: buf_page_get_zip(): Fix a bogus warning about block_mutex being possibly uninitialized. ------------------------------------------------------------------------ r5392 \| marko \| 2009-06-22 07:58:20 -0400 (Mon, 22 Jun 2009) \| 4 lines branches/zip: ha_innobase::check_if_incompatible_data(): When ROW_FORMAT=DEFAULT, do not compare to get_row_type(). Without this change, fast index creation will be disabled in recent versions of MySQL 5.1. ------------------------------------------------------------------------ r5393 \| pekka \| 2009-06-22 09:27:55 -0400 (Mon, 22 Jun 2009) \| 4 lines branches/zip: Minor changes for Hot Backup to build correctly. (The code bracketed between #ifdef UNIV_HOTBACKUP and #endif / UNIV_HOTBACKUP /). This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r5394 \| pekka \| 2009-06-22 09:46:34 -0400 (Mon, 22 Jun 2009) \| 4 lines branches/zip: Add functions for checking the format of tablespaces for Hot Backup build (UNIV_HOTBACKUP defined). This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r5397 \| calvin \| 2009-06-23 16:59:42 -0400 (Tue, 23 Jun 2009) \| 7 lines branches/zip: change the header file path. Change the header file path from ../storage/innobase/include/ to ../include/. In the planned 5.1 + plugin release, the source directory of the plugin will not be in storage/innobase. Approved by: Heikki (IM) ------------------------------------------------------------------------ r5407 \| calvin \| 2009-06-24 09:51:08 -0400 (Wed, 24 Jun 2009) \| 4 lines branches/zip: remove relative path of header files. Suggested by Marko. ------------------------------------------------------------------------ r5412 \| marko \| 2009-06-25 06:27:08 -0400 (Thu, 25 Jun 2009) \| 1 line branches/zip: Replace a DBUG_ASSERT with ut_a to track down Issue #290. ------------------------------------------------------------------------ r5415 \| marko \| 2009-06-25 06:45:57 -0400 (Thu, 25 Jun 2009) \| 3 lines branches/zip: dict_index_find_cols(): Print diagnostic on name mismatch. This addresses Bug #44571 but does not fix it. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5417 \| marko \| 2009-06-25 08:20:56 -0400 (Thu, 25 Jun 2009) \| 1 line branches/zip: ha_innodb.cc: Move the misplaced Doxygen @file comment. ------------------------------------------------------------------------ r5418 \| marko \| 2009-06-25 08:55:52 -0400 (Thu, 25 Jun 2009) \| 5 lines branches/zip: Fix a race condition caused by SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749) When innodb_commit_concurrency is initially set nonzero, DEFAULT would change it back to 0, triggering Bug #42101. rb://139 approved by Heikki Tuuri. ------------------------------------------------------------------------ r5423 \| calvin \| 2009-06-26 16:52:52 -0400 (Fri, 26 Jun 2009) \| 2 lines branches/zip: Fix typos. ------------------------------------------------------------------------ r5425 \| marko \| 2009-06-29 04:52:30 -0400 (Mon, 29 Jun 2009) \| 4 lines branches/zip: ha_innobase::add_index(), ha_innobase::final_drop_index(): Start prebuilt->trx before locking the table. This should fix Issue #293 and could fix Issue #229. Approved by Sunny (over IM). ------------------------------------------------------------------------ r5426 \| marko \| 2009-06-29 05:24:27 -0400 (Mon, 29 Jun 2009) \| 3 lines branches/zip: buf_page_get_gen(): Fix a race condition when reading buf_fix_count. This could explain Issue #156. Tested by Michael. ------------------------------------------------------------------------ r5427 \| marko \| 2009-06-29 05:54:53 -0400 (Mon, 29 Jun 2009) \| 5 lines branches/zip: lock_print_info_all_transactions(), buf_read_recv_pages(): Tolerate missing tablespaces (zip_size==ULINT_UNDEFINED). buf_page_get_gen(): Add ut_ad(ut_is_2pow(zip_size)). Issue #289, rb://136 approved by Sunny Bains ------------------------------------------------------------------------ r5428 \| marko \| 2009-06-29 07:06:29 -0400 (Mon, 29 Jun 2009) \| 2 lines branches/zip: row_sel_store_mysql_rec(): Add missing pointer cast. Do not do arithmetics on void pointers. ------------------------------------------------------------------------ r5429 \| marko \| 2009-06-29 09:49:54 -0400 (Mon, 29 Jun 2009) \| 13 lines branches/zip: Do not crash on SET GLOBAL innodb_file_format=DEFAULT or SET GLOBAL innodb_file_format_check=DEFAULT. innodb_file_format.test: New test for innodb_file_format and innodb_file_format_check. innodb_file_format_name_validate(): Store the string in save. innodb_file_format_name_update(): Check the string again. innodb_file_format_check_validate(): Store the string in save. innodb_file_format_check_update(): Check the string again. Issue #282, rb://140 approved by Heikki Tuuri ------------------------------------------------------------------------ r5430 \| marko \| 2009-06-29 09:58:07 -0400 (Mon, 29 Jun 2009) \| 2 lines branches/zip: lock_rec_validate_page(): Add another assertion to track down Issue #289. ------------------------------------------------------------------------ r5431 \| marko \| 2009-06-29 09:58:40 -0400 (Mon, 29 Jun 2009) \| 1 line branches/zip: Revert an accidentally made change in r5430 to univ.i. ------------------------------------------------------------------------ r5437 \| marko \| 2009-06-30 05:10:01 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: ibuf_dummy_index_free(): Beautify the comment. ------------------------------------------------------------------------ r5438 \| marko \| 2009-06-30 05:10:32 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: fseg_free(): Remove this unused function. ------------------------------------------------------------------------ r5439 \| marko \| 2009-06-30 05:15:22 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: fseg_validate(): Enclose in #ifdef UNIV_DEBUG. This function is unused, but it could turn out to be a useful debugging aid. ------------------------------------------------------------------------ r5441 \| marko \| 2009-06-30 06:30:14 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: ha_delete(): Remove this unused function that was very similar to ha_search_and_delete_if_found(). ------------------------------------------------------------------------ r5442 \| marko \| 2009-06-30 06:45:41 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: lock_is_on_table(), lock_table_unlock(): Unused, remove. ------------------------------------------------------------------------ r5443 \| marko \| 2009-06-30 07:03:00 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: os_event_create_auto(): Unused, remove. ------------------------------------------------------------------------ r5444 \| marko \| 2009-06-30 07:19:49 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: que_graph_try_free(): Unused, remove. ------------------------------------------------------------------------ r5445 \| marko \| 2009-06-30 07:28:11 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: row_build_row_ref_from_row(): Unused, remove. ------------------------------------------------------------------------ r5446 \| marko \| 2009-06-30 07:35:45 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: srv_que_round_robin(), srv_que_task_enqueue(): Unused, remove. ------------------------------------------------------------------------ r5447 \| marko \| 2009-06-30 07:37:58 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: srv_que_task_queue_check(): Unused, remove. ------------------------------------------------------------------------ r5448 \| marko \| 2009-06-30 07:56:36 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: mem_heap_cat(): Unused, remove. ------------------------------------------------------------------------ r5449 \| marko \| 2009-06-30 08:00:50 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: innobase_start_or_create_for_mysql(): Invoke os_get_os_version() at most once. ------------------------------------------------------------------------ r5450 \| marko \| 2009-06-30 08:02:20 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: os_file_close_no_error_handling(): Unused, remove. ------------------------------------------------------------------------ r5451 \| marko \| 2009-06-30 08:09:49 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: page_set_max_trx_id(): Make the code compile with UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5452 \| marko \| 2009-06-30 08:10:26 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: os_file_close_no_error_handling(): Restore, as this function is used within InnoDB Hot Backup. ------------------------------------------------------------------------ r5453 \| marko \| 2009-06-30 08:14:01 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: os_process_set_priority_boost(): Unused, remove. ------------------------------------------------------------------------ r5454 \| marko \| 2009-06-30 08:42:52 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: Replace a non-ASCII character (ISO 8859-1 encoded U+00AD SOFT HYPHEN) with a cheap ASCII substitute. ------------------------------------------------------------------------ r5456 \| inaam \| 2009-06-30 14:21:09 -0400 (Tue, 30 Jun 2009) \| 4 lines branches/zip Non functional change. s/Percona/Percona Inc./ ------------------------------------------------------------------------ r5470 \| vasil \| 2009-07-02 09:12:36 -0400 (Thu, 02 Jul 2009) \| 16 lines branches/zip: Use PAUSE instruction inside spinloop if it is available. The patch was originally developed by Mikael Ronstrom <mikael@mysql.com> and can be found here: http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2768 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2771 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2772 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2774 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2777 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2799 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2800 Approved by: Heikki (rb://137) ------------------------------------------------------------------------ r5481 \| vasil \| 2009-07-06 13:16:32 -0400 (Mon, 06 Jul 2009) \| 4 lines branches/zip: Remove unnecessary quotes and simplify plug.in. ------------------------------------------------------------------------ r5482 \| calvin \| 2009-07-06 18:36:35 -0400 (Mon, 06 Jul 2009) \| 5 lines branches/zip: add COPYING files for Percona and Sun Micro. 1.0.4 contains patches based on contributions from Percona and Sun Microsystems. ------------------------------------------------------------------------ r5483 \| calvin \| 2009-07-07 05:36:43 -0400 (Tue, 07 Jul 2009) \| 3 lines branches/zip: add IB_HAVE_PAUSE_INSTRUCTION to CMake. Windows will support PAUSE instruction by default. ------------------------------------------------------------------------ r5484 \| inaam \| 2009-07-07 18:57:14 -0400 (Tue, 07 Jul 2009) \| 13 lines branches/zip rb://126 Based on contribution from Google Inc. This patch introduces a new parameter innodb_io_capacity to control the rate at which master threads performs various tasks. The default value is 200 and higher values imply more aggressive flushing and ibuf merges from within the master thread. This patch also changes the ibuf merge from synchronous to asynchronous. Another minor change is not to force the master thread to wait for a log flush to complete every second. Approved by: Heikki ------------------------------------------------------------------------ r5485 \| inaam \| 2009-07-07 19:00:49 -0400 (Tue, 07 Jul 2009) \| 18 lines branches/zip rb://138 The current implementation is to try to flush the neighbors of every page that we flush. This patch makes the following distinction: 1) If the flush is from flush_list AND 2) If the flush is intended to move the oldest_modification LSN ahead (this happens when a user thread sees little space in the log file and attempts to flush pages from the buffer pool so that a checkpoint can be made) THEN Do not try to flush the neighbors. Just focus on flushing dirty pages at the end of flush_list Approved by: Heikki ------------------------------------------------------------------------ r5486 \| inaam \| 2009-07-08 12:11:40 -0400 (Wed, 08 Jul 2009) \| 29 lines branches/zip rb://133 This patch introduces heuristics based flushing rate of dirty pages to avoid IO bursts at checkpoint. 1) log_capacity / log_generated per second gives us number of seconds in which ALL dirty pages need to be flushed. Based on this rough assumption we can say that n_dirty_pages / (log_capacity / log_generation_rate) = desired_flush_rate 2) We use weighted averages (hard coded to 20 seconds) of log_generation_rate to avoid resonance. 3) From the desired_flush_rate we subtract the number of pages that have been flushed due to LRU flushing. That gives us pages that we should flush as part of flush_list cleanup. And that is the number (capped by maximum io_capacity) that we try to flush from the master thread. Knobs: ====== innodb_adaptive_flushing: boolean, global, dynamic, default TRUE. Since this heuristic is very experimental and has the potential to dramatically change the IO pattern I think it is a good idea to leave a knob to turn it off. Approved by: Heikki ------------------------------------------------------------------------ r5487 \| calvin \| 2009-07-08 12:42:28 -0400 (Wed, 08 Jul 2009) \| 7 lines branches/zip: fix PAUSE instruction patch on Windows The original PAUSE instruction patch (r5470) does not compile on Windows. Also, there is an elegant way of doing it on Windows - YieldProcessor(). Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5489 \| vasil \| 2009-07-10 05:02:22 -0400 (Fri, 10 Jul 2009) \| 9 lines branches/zip: Change the defaults for innodb_sync_spin_loops: 20 -> 30 innodb_spin_wait_delay: 5 -> 6 This change was proposed by Sun/MySQL based on their performance testing, see https://svn.innodb.com/innobase/Release_tasks_for_InnoDB_Plugin_V1.0.4 ------------------------------------------------------------------------ r5490 \| vasil \| 2009-07-10 05:04:20 -0400 (Fri, 10 Jul 2009) \| 4 lines branches/zip: Add ChangeLog entry for 5489. ------------------------------------------------------------------------ r5491 \| calvin \| 2009-07-10 12:19:17 -0400 (Fri, 10 Jul 2009) \| 6 lines branches/zip: add copyright info to files related to PAUSE instruction patch, contributed by Sun Microsystems. ------------------------------------------------------------------------ r5492 \| calvin \| 2009-07-10 17:47:34 -0400 (Fri, 10 Jul 2009) \| 5 lines branches/zip: add ChangeLog entries for r5484-r5486. ------------------------------------------------------------------------ r5494 \| vasil \| 2009-07-13 03:37:35 -0400 (Mon, 13 Jul 2009) \| 6 lines branches/zip: Restore the original value of innodb_sync_spin_loops at the end, previously the test assumed that setting it to 20 will do this, but now the default is 30 and MTR's internal check failed. ------------------------------------------------------------------------ r5495 \| inaam \| 2009-07-13 11:48:45 -0400 (Mon, 13 Jul 2009) \| 5 lines branches/zip rb://138 (REVERT) Revert the flush neighbors patch as it shows regression in the benchmarks run by Michael. ------------------------------------------------------------------------ r5496 \| inaam \| 2009-07-13 14:04:57 -0400 (Mon, 13 Jul 2009) \| 4 lines branches/zip Fixed warnings on windows where ulint != ib_uint64_t ------------------------------------------------------------------------ r5497 \| calvin \| 2009-07-13 15:01:00 -0400 (Mon, 13 Jul 2009) \| 9 lines branches/zip: fix run-time symbols clash on Solaris. This patch is from Sergey Vojtovich of Sun Microsystems, to fix run-time symbols clash on Solaris with older C++ compiler: - when finding out a way to hide symbols, make decision basing on compiler, not operating system. - Sun Studio supports __hidden declaration specifier for this purpose. ------------------------------------------------------------------------ r5498 \| vasil \| 2009-07-14 03:16:18 -0400 (Tue, 14 Jul 2009) \| 92 lines branches/zip: Merge r5341:5497 from branches/5.1, skipping: c5419 because it is merge from branches/zip into branches/5.1 c5466 because the source code has been adjusted to match the MySQL behavior and the innodb-autoinc test does not fail in branches/zip, if c5466 is merged, then innodb-autoinc starts failing, Sunny suggested not to merge c5466. and resolving conflicts in c5410, c5440, c5488: ------------------------------------------------------------------------ r5410 \| marko \| 2009-06-24 22:26:34 +0300 (Wed, 24 Jun 2009) \| 2 lines Changed paths: M /branches/5.1/include/trx0sys.ic M /branches/5.1/trx/trx0purge.c M /branches/5.1/trx/trx0sys.c M /branches/5.1/trx/trx0undo.c branches/5.1: Add missing #include "mtr0log.h" to avoid warnings when compiling with -DUNIV_MUST_NOT_INLINE. ------------------------------------------------------------------------ r5419 \| marko \| 2009-06-25 16:11:57 +0300 (Thu, 25 Jun 2009) \| 18 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb_bug42101-nonzero.result M /branches/5.1/mysql-test/innodb_bug42101-nonzero.test M /branches/5.1/mysql-test/innodb_bug42101.result M /branches/5.1/mysql-test/innodb_bug42101.test branches/5.1: Merge r5418 from branches/zip: ------------------------------------------------------------------------ r5418 \| marko \| 2009-06-25 15:55:52 +0300 (Thu, 25 Jun 2009) \| 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc M /branches/zip/mysql-test/innodb_bug42101-nonzero.result M /branches/zip/mysql-test/innodb_bug42101-nonzero.test M /branches/zip/mysql-test/innodb_bug42101.result M /branches/zip/mysql-test/innodb_bug42101.test branches/zip: Fix a race condition caused by SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749) When innodb_commit_concurrency is initially set nonzero, DEFAULT would change it back to 0, triggering Bug #42101. rb://139 approved by Heikki Tuuri. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5440 \| vasil \| 2009-06-30 13:04:29 +0300 (Tue, 30 Jun 2009) \| 8 lines Changed paths: M /branches/5.1/fil/fil0fil.c branches/5.1: Fix Bug#45814 URL reference in InnoDB server errors needs adjusting to match documentation by changing the URL from http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html to http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting-datadict.html ------------------------------------------------------------------------ r5466 \| vasil \| 2009-07-02 10:46:45 +0300 (Thu, 02 Jul 2009) \| 6 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Adjust the failing innodb-autoinc test to conform to the latest behavior of the MySQL code. The idea and the comment in innodb-autoinc.test come from Sunny. ------------------------------------------------------------------------ r5488 \| vasil \| 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) \| 13 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug21704.result A /branches/5.1/mysql-test/innodb_bug21704.test branches/5.1: Fix Bug#21704 Renaming column does not update FK definition by checking whether a column that participates in a FK definition is being renamed and denying the ALTER in this case. The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>: http://lists.mysql.com/commits/77714 and was later adjusted to conform to InnoDB coding style by me (Vasil), I also added some more comments and moved the bug specific mysql-test to a separate file to make it more manageable and flexible. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5499 \| calvin \| 2009-07-14 12:55:10 -0400 (Tue, 14 Jul 2009) \| 3 lines branches/zip: add a missing file in Makefile.am This change was suggested by MySQL. ------------------------------------------------------------------------ r5500 \| calvin \| 2009-07-14 13:03:26 -0400 (Tue, 14 Jul 2009) \| 3 lines branches/zip: minor change Remove an extra "with". ------------------------------------------------------------------------ r5501 \| vasil \| 2009-07-14 13:58:15 -0400 (Tue, 14 Jul 2009) \| 5 lines branches/zip: Add @ZLIB_INCLUDES@ so that the InnoDB Plugin picks up the same zlib.h header file that is eventually used by mysqld. ------------------------------------------------------------------------ r5502 \| vasil \| 2009-07-14 13:59:59 -0400 (Tue, 14 Jul 2009) \| 4 lines branches/zip: Add include/ut0auxconf.h to noinst_HEADERS ------------------------------------------------------------------------ r5503 \| vasil \| 2009-07-14 14:16:11 -0400 (Tue, 14 Jul 2009) \| 8 lines branches/zip: Non-functional change: put files in noinst_HEADERS and libinnobase_a_SOURCES one per line and sort alphabetically, so it is easier to find if a file is there or not and also diffs show exactly the added or removed file instead of surrounding lines too. ------------------------------------------------------------------------ r5504 \| calvin \| 2009-07-15 04:58:44 -0400 (Wed, 15 Jul 2009) \| 6 lines branches/zip: fix compile errors on Win64 Both srv_read_ahead_factor and srv_io_capacity should be defined as ulong. Approved by: Sunny ------------------------------------------------------------------------ r5508 \| calvin \| 2009-07-16 09:40:47 -0400 (Thu, 16 Jul 2009) \| 16 lines branches/zip: Support inlining of functions and prefetch with Sun Studio Those changes are contributed by Sun/MySQL. Two sets of changes in this patch when Sun Studio is used: - Explicit inlining of functions - Prefetch Support This patch has been tested by Sunny with the plugin statically built in. Since we've never built the plugin as a dynamically loaded module on Solaris, it is a separate task to change plug.in. rb://142 Approved by: Heikki ------------------------------------------------------------------------ r5509 \| calvin \| 2009-07-16 09:45:28 -0400 (Thu, 16 Jul 2009) \| 2 lines branches/zip: add ChangeLog entry for r5508. ------------------------------------------------------------------------ r5512 \| sunny \| 2009-07-19 19:52:48 -0400 (Sun, 19 Jul 2009) \| 2 lines branches/zip: Remove unused extern ref to timed_mutexes. ------------------------------------------------------------------------ r5513 \| sunny \| 2009-07-19 19:58:43 -0400 (Sun, 19 Jul 2009) \| 2 lines branches/zip: Undo r5512 ------------------------------------------------------------------------ r5514 \| sunny \| 2009-07-19 20:08:49 -0400 (Sun, 19 Jul 2009) \| 2 lines branches/zip: Only use my_bool when UNIV_HOTBACKUP is not defined. ------------------------------------------------------------------------ r5515 \| sunny \| 2009-07-20 03:29:14 -0400 (Mon, 20 Jul 2009) \| 2 lines branches/zip: The dict_table_t::autoinc_mutex field is not used in HotBackup. ------------------------------------------------------------------------ r5516 \| sunny \| 2009-07-20 03:46:05 -0400 (Mon, 20 Jul 2009) \| 4 lines branches/zip: Make this file usable from within HotBackup. A new file has been introduced called hb_univ.i. This file should have all the HotBackup specific configuration. ------------------------------------------------------------------------ r5517 \| sunny \| 2009-07-20 03:55:11 -0400 (Mon, 20 Jul 2009) \| 2 lines Add / UNIV_HOTBACK */ ------------------------------------------------------------------------ r5519 \| vasil \| 2009-07-20 04:45:18 -0400 (Mon, 20 Jul 2009) \| 31 lines branches/zip: Merge r5497:5518 from branches/5.1: ------------------------------------------------------------------------ r5518 \| vasil \| 2009-07-20 11:29:47 +0300 (Mon, 20 Jul 2009) \| 22 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2874.2.1 committer: Anurag Shekhar <anurag.shekhar@sun.com> branch nick: mysql-5.1-bugteam-windows-warning timestamp: Wed 2009-05-13 15:41:24 +0530 message: Bug #39802 On Windows, 32-bit time_t should be enforced This patch fixes compilation warning, "conversion from 'time_t' to 'ulong', possible loss of data". The fix is to typecast time_t to ulong before assigning it to ulong. Backported this from 6.0-bugteam tree. modified: storage/archive/ha_archive.cc storage/federated/ha_federated.cc storage/innobase/handler/ha_innodb.cc storage/myisam/ha_myisam.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5520 \| vasil \| 2009-07-20 04:51:47 -0400 (Mon, 20 Jul 2009) \| 4 lines branches/zip: Add ChangeLog entries for r5498 and r5519. ------------------------------------------------------------------------ r5524 \| inaam \| 2009-07-20 12:23:15 -0400 (Mon, 20 Jul 2009) \| 9 lines branches/zip Change the read ahead parameter name to innodb_read_ahead_threshold. Change the meaning of this parameter to signify the number of pages that must be sequentially accessed for InnoDB to trigger a readahead request. Suggested by: Ken ------------------------------------------------------------------------	17 years ago
inaam	0c990811de	branches/innodb+: Merge revisions 5144:5524 from branches/zip ------------------------------------------------------------------------ r5147 \| marko \| 2009-05-27 06:55:14 -0400 (Wed, 27 May 2009) \| 1 line branches/zip: ibuf0ibuf.c: Improve a comment. ------------------------------------------------------------------------ r5149 \| marko \| 2009-05-27 07:46:42 -0400 (Wed, 27 May 2009) \| 34 lines branches/zip: Merge revisions 4994:5148 from branches/5.1: ------------------------------------------------------------------------ r5126 \| vasil \| 2009-05-26 16:57:12 +0300 (Tue, 26 May 2009) \| 9 lines branches/5.1: Preparation for the fix of Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Non-functional change: move FSP_* macros from fsp0fsp.h to a new file fsp0types.h. This is needed in order to be able to use FSP_EXTENT_SIZE in mtr0log.ic. ------------------------------------------------------------------------ r5127 \| vasil \| 2009-05-26 17:05:43 +0300 (Tue, 26 May 2009) \| 9 lines branches/5.1: Preparation for the fix of Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Do not include unnecessary headers mtr0log.h and fut0lst.h in trx0sys.h and include fsp0fsp.h just before it is needed. This is needed in order to be able to use TRX_SYS_SPACE in mtr0log.ic. ------------------------------------------------------------------------ r5128 \| vasil \| 2009-05-26 17:26:37 +0300 (Tue, 26 May 2009) \| 7 lines branches/5.1: Fix Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Do not write redo log for the pages in the doublewrite buffer. Also, do not make a dummy change to the page because this is not needed. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5169 \| marko \| 2009-05-28 03:21:55 -0400 (Thu, 28 May 2009) \| 1 line branches/zip: mtr0mtr.h: Add Doxygen comments for the redo log entry types. ------------------------------------------------------------------------ r5176 \| marko \| 2009-05-28 07:14:02 -0400 (Thu, 28 May 2009) \| 1 line branches/zip: Correct a debug assertion that was added in r5125. ------------------------------------------------------------------------ r5201 \| marko \| 2009-06-01 06:35:25 -0400 (Mon, 01 Jun 2009) \| 2 lines branches/zip: Clean up some comments. Make the rec parameter of mlog_open_and_write_index() const. ------------------------------------------------------------------------ r5234 \| marko \| 2009-06-03 08:26:41 -0400 (Wed, 03 Jun 2009) \| 44 lines branches/zip: Merge revisions 5148:5233 from branches/5.1: ------------------------------------------------------------------------ r5150 \| vasil \| 2009-05-27 18:56:03 +0300 (Wed, 27 May 2009) \| 4 lines branches/5.1: Whitespace fixup. ------------------------------------------------------------------------ r5191 \| vasil \| 2009-05-30 17:46:05 +0300 (Sat, 30 May 2009) \| 19 lines branches/5.1: Merge a change from MySQL (this fixes the failing innodb_mysql test): ------------------------------------------------------------ revno: 1810.3894.10 committer: Sergey Glukhov <Sergey.Glukhov@sun.com> branch nick: mysql-5.0-bugteam timestamp: Tue 2009-05-19 11:32:21 +0500 message: Bug#39793 Foreign keys not constructed when column has a '#' in a comment or default value Internal InnoDN FK parser does not recognize '\'' as quotation symbol. Suggested fix is to add '\'' symbol check for quotation condition (dict_strip_comments() function). modified: innobase/dict/dict0dict.c mysql-test/r/innodb_mysql.result mysql-test/t/innodb_mysql.test ------------------------------------------------------------------------ r5233 \| marko \| 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) \| 11 lines branches/5.1: Merge the test case from r5232 from branches/5.0: ------------------------------------------------------------------------ r5232 \| marko \| 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) \| 21 lines branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565 (Update Query Results in "1 Row Affected" But Should Be "Zero Rows"). Also, add a test case for Bug #40565. rb://128 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5250 \| marko \| 2009-06-04 02:58:23 -0400 (Thu, 04 Jun 2009) \| 1 line branches/zip: Add Doxygen comments to the rest of buf0. ------------------------------------------------------------------------ r5251 \| marko \| 2009-06-04 02:59:51 -0400 (Thu, 04 Jun 2009) \| 1 line branches/zip: Replace <= in a function comment. ------------------------------------------------------------------------ r5253 \| marko \| 2009-06-04 06:37:35 -0400 (Thu, 04 Jun 2009) \| 1 line branches/zip: Add missing Doxygen comments for page0zip. ------------------------------------------------------------------------ r5261 \| vasil \| 2009-06-05 11:13:31 -0400 (Fri, 05 Jun 2009) \| 15 lines branches/zip: Fix Mantis Issue#244 fix bug in linear read ahead (no check on access pattern) The changes are: 1) Take into account access pattern when deciding whether or not to do linear read ahead. 2) Expose a knob innodb_read_ahead_factor = [0-64] default (8), dynamic, global to control linear read ahead behvior 3) Disable random read ahead. Keep the code for now. Submitted by: Inaam (rb://122) Approved by: Heikki (rb://122) ------------------------------------------------------------------------ r5262 \| vasil \| 2009-06-05 12:04:25 -0400 (Fri, 05 Jun 2009) \| 22 lines branches/zip: Enable functionality to have multiple background io helper threads. This patch is based on percona contributions. More details about this patch will be written at: https://svn.innodb.com/innobase/MultipleBackgroundThreads The patch essentially does the following: expose following knobs: innodb_read_io_threads = [1 - 64] default 1 innodb_write_io_threads = [1 - 64] default 1 deprecate innodb_file_io_threads (this parameter was relevant only on windows) Internally it allows multiple segments for read and write IO request arrays where one thread works on one segement. Submitted by: Inaam (rb://124) Approved by: Heikki (rb://124) ------------------------------------------------------------------------ r5263 \| vasil \| 2009-06-05 12:19:37 -0400 (Fri, 05 Jun 2009) \| 4 lines branches/zip: Whitespace cleanup. ------------------------------------------------------------------------ r5264 \| vasil \| 2009-06-05 12:26:58 -0400 (Fri, 05 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entry for r5261. ------------------------------------------------------------------------ r5265 \| vasil \| 2009-06-05 12:34:11 -0400 (Fri, 05 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entry for r5262. ------------------------------------------------------------------------ r5268 \| inaam \| 2009-06-08 12:18:21 -0400 (Mon, 08 Jun 2009) \| 7 lines branches/zip Non functional change: Added legal notices acknowledging percona contribution to the multiple IO helper threads patch i.e.: r5262 ------------------------------------------------------------------------ r5283 \| inaam \| 2009-06-09 13:46:29 -0400 (Tue, 09 Jun 2009) \| 9 lines branches/zip rb://130 Enable Group Commit functionality that was broken in 5.0 when distributed transactions were introduced. Reviewed by: Heikki ------------------------------------------------------------------------ r5319 \| marko \| 2009-06-11 04:40:33 -0400 (Thu, 11 Jun 2009) \| 3 lines branches/zip: Declare os_thread_id_t as unsigned long, because ulint is wrong on Win64. Pointed out by Vladislav Vaintroub <wlad@sun.com>. ------------------------------------------------------------------------ r5320 \| inaam \| 2009-06-11 09:15:41 -0400 (Thu, 11 Jun 2009) \| 14 lines branches/zip rb://131 This patch changes the following defaults: max_dirty_pages_pct: default from 90 to 75. max allowed from 100 to 99 additional_mem_pool_size: default from 1 to 8 MB buffer_pool_size: default from 8 to 128 MB log_buffer_size: default from 1 to 8 MB read_io_threads/write_io_threads: default from 1 to 4 The log file sizes are untouched because of upgrade issues Reviewed by: Heikki ------------------------------------------------------------------------ r5330 \| marko \| 2009-06-16 04:08:59 -0400 (Tue, 16 Jun 2009) \| 2 lines branches/zip: buf_page_get_gen(): Reduce mutex holding time by adjusting buf_pool->n_pend_unzip while only holding buf_pool_mutex. ------------------------------------------------------------------------ r5331 \| marko \| 2009-06-16 05:00:48 -0400 (Tue, 16 Jun 2009) \| 2 lines branches/zip: buf_page_get_zip(): Eliminate a buf_page_get_mutex() call. The function must switch on the block state anyway. ------------------------------------------------------------------------ r5332 \| vasil \| 2009-06-16 05:03:27 -0400 (Tue, 16 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entries for r5283 and r5320. ------------------------------------------------------------------------ r5333 \| marko \| 2009-06-16 05:27:46 -0400 (Tue, 16 Jun 2009) \| 1 line branches/zip: buf_page_io_query(): Remove unused function. ------------------------------------------------------------------------ r5335 \| marko \| 2009-06-16 09:23:10 -0400 (Tue, 16 Jun 2009) \| 2 lines branches/zip: innodb.test: Adjust the tolerance of innodb_buffer_pool_pages_total for r5320. ------------------------------------------------------------------------ r5342 \| marko \| 2009-06-17 06:15:32 -0400 (Wed, 17 Jun 2009) \| 60 lines branches/zip: Merge revisions 5233:5341 from branches/5.1: ------------------------------------------------------------------------ r5233 \| marko \| 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) \| 11 lines branches/5.1: Merge the test case from r5232 from branches/5.0: ------------------------------------------------------------------------ r5232 \| marko \| 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) \| 21 lines branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565 (Update Query Results in "1 Row Affected" But Should Be "Zero Rows"). Also, add a test case for Bug #40565. rb://128 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5243 \| sunny \| 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) \| 14 lines branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before the bug fix we would assert on missing autoinc columns. With this fix we allow MySQL to open the table but set the next autoinc value for the column to the MAX value. This effectively disables the next value generation. INSERTs will fail with a generic AUTOINC failure. However, the user should be able to read/dump the table, set the column values explicitly, use ALTER TABLE to set the next autoinc value and/or sync the two data dictionaries to resume normal operations. Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the index (PRIMARY) rb://118 ------------------------------------------------------------------------ r5252 \| sunny \| 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) \| 2 lines branches/5.1: The version of the result file checked in was broken in r5243. ------------------------------------------------------------------------ r5259 \| vasil \| 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) \| 7 lines branches/5.1: Remove the word "Error" from the printout because the mysqltest suite interprets it as an error and thus the innodb-autoinc test fails. Approved by: Sunny (via IM) ------------------------------------------------------------------------ r5339 \| marko \| 2009-06-17 11:01:37 +0300 (Wed, 17 Jun 2009) \| 2 lines branches/5.1: Add missing #include "mtr0log.h" so that the code compiles with -DUNIV_MUST_NOT_INLINE. (null merge; this had already been committed in branches/zip) ------------------------------------------------------------------------ r5340 \| marko \| 2009-06-17 12:11:49 +0300 (Wed, 17 Jun 2009) \| 4 lines branches/5.1: row_unlock_for_mysql(): When the clustered index is unknown, refuse to unlock the record. (Bug #45357, caused by the fix of Bug #39320). rb://132 approved by Sunny Bains. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5343 \| vasil \| 2009-06-17 08:56:12 -0400 (Wed, 17 Jun 2009) \| 4 lines branches/zip: Add ChangeLog entry for r5342. ------------------------------------------------------------------------ r5344 \| marko \| 2009-06-17 09:03:45 -0400 (Wed, 17 Jun 2009) \| 1 line branches/zip: row_merge_read_rec(): Fix a UNIV_DEBUG bug (Bug #45426) ------------------------------------------------------------------------ r5391 \| marko \| 2009-06-22 05:31:35 -0400 (Mon, 22 Jun 2009) \| 2 lines branches/zip: buf_page_get_zip(): Fix a bogus warning about block_mutex being possibly uninitialized. ------------------------------------------------------------------------ r5392 \| marko \| 2009-06-22 07:58:20 -0400 (Mon, 22 Jun 2009) \| 4 lines branches/zip: ha_innobase::check_if_incompatible_data(): When ROW_FORMAT=DEFAULT, do not compare to get_row_type(). Without this change, fast index creation will be disabled in recent versions of MySQL 5.1. ------------------------------------------------------------------------ r5393 \| pekka \| 2009-06-22 09:27:55 -0400 (Mon, 22 Jun 2009) \| 4 lines branches/zip: Minor changes for Hot Backup to build correctly. (The code bracketed between #ifdef UNIV_HOTBACKUP and #endif / UNIV_HOTBACKUP /). This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r5394 \| pekka \| 2009-06-22 09:46:34 -0400 (Mon, 22 Jun 2009) \| 4 lines branches/zip: Add functions for checking the format of tablespaces for Hot Backup build (UNIV_HOTBACKUP defined). This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r5397 \| calvin \| 2009-06-23 16:59:42 -0400 (Tue, 23 Jun 2009) \| 7 lines branches/zip: change the header file path. Change the header file path from ../storage/innobase/include/ to ../include/. In the planned 5.1 + plugin release, the source directory of the plugin will not be in storage/innobase. Approved by: Heikki (IM) ------------------------------------------------------------------------ r5407 \| calvin \| 2009-06-24 09:51:08 -0400 (Wed, 24 Jun 2009) \| 4 lines branches/zip: remove relative path of header files. Suggested by Marko. ------------------------------------------------------------------------ r5412 \| marko \| 2009-06-25 06:27:08 -0400 (Thu, 25 Jun 2009) \| 1 line branches/zip: Replace a DBUG_ASSERT with ut_a to track down Issue #290. ------------------------------------------------------------------------ r5415 \| marko \| 2009-06-25 06:45:57 -0400 (Thu, 25 Jun 2009) \| 3 lines branches/zip: dict_index_find_cols(): Print diagnostic on name mismatch. This addresses Bug #44571 but does not fix it. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5417 \| marko \| 2009-06-25 08:20:56 -0400 (Thu, 25 Jun 2009) \| 1 line branches/zip: ha_innodb.cc: Move the misplaced Doxygen @file comment. ------------------------------------------------------------------------ r5418 \| marko \| 2009-06-25 08:55:52 -0400 (Thu, 25 Jun 2009) \| 5 lines branches/zip: Fix a race condition caused by SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749) When innodb_commit_concurrency is initially set nonzero, DEFAULT would change it back to 0, triggering Bug #42101. rb://139 approved by Heikki Tuuri. ------------------------------------------------------------------------ r5423 \| calvin \| 2009-06-26 16:52:52 -0400 (Fri, 26 Jun 2009) \| 2 lines branches/zip: Fix typos. ------------------------------------------------------------------------ r5425 \| marko \| 2009-06-29 04:52:30 -0400 (Mon, 29 Jun 2009) \| 4 lines branches/zip: ha_innobase::add_index(), ha_innobase::final_drop_index(): Start prebuilt->trx before locking the table. This should fix Issue #293 and could fix Issue #229. Approved by Sunny (over IM). ------------------------------------------------------------------------ r5426 \| marko \| 2009-06-29 05:24:27 -0400 (Mon, 29 Jun 2009) \| 3 lines branches/zip: buf_page_get_gen(): Fix a race condition when reading buf_fix_count. This could explain Issue #156. Tested by Michael. ------------------------------------------------------------------------ r5427 \| marko \| 2009-06-29 05:54:53 -0400 (Mon, 29 Jun 2009) \| 5 lines branches/zip: lock_print_info_all_transactions(), buf_read_recv_pages(): Tolerate missing tablespaces (zip_size==ULINT_UNDEFINED). buf_page_get_gen(): Add ut_ad(ut_is_2pow(zip_size)). Issue #289, rb://136 approved by Sunny Bains ------------------------------------------------------------------------ r5428 \| marko \| 2009-06-29 07:06:29 -0400 (Mon, 29 Jun 2009) \| 2 lines branches/zip: row_sel_store_mysql_rec(): Add missing pointer cast. Do not do arithmetics on void pointers. ------------------------------------------------------------------------ r5429 \| marko \| 2009-06-29 09:49:54 -0400 (Mon, 29 Jun 2009) \| 13 lines branches/zip: Do not crash on SET GLOBAL innodb_file_format=DEFAULT or SET GLOBAL innodb_file_format_check=DEFAULT. innodb_file_format.test: New test for innodb_file_format and innodb_file_format_check. innodb_file_format_name_validate(): Store the string in save. innodb_file_format_name_update(): Check the string again. innodb_file_format_check_validate(): Store the string in save. innodb_file_format_check_update(): Check the string again. Issue #282, rb://140 approved by Heikki Tuuri ------------------------------------------------------------------------ r5430 \| marko \| 2009-06-29 09:58:07 -0400 (Mon, 29 Jun 2009) \| 2 lines branches/zip: lock_rec_validate_page(): Add another assertion to track down Issue #289. ------------------------------------------------------------------------ r5431 \| marko \| 2009-06-29 09:58:40 -0400 (Mon, 29 Jun 2009) \| 1 line branches/zip: Revert an accidentally made change in r5430 to univ.i. ------------------------------------------------------------------------ r5437 \| marko \| 2009-06-30 05:10:01 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: ibuf_dummy_index_free(): Beautify the comment. ------------------------------------------------------------------------ r5438 \| marko \| 2009-06-30 05:10:32 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: fseg_free(): Remove this unused function. ------------------------------------------------------------------------ r5439 \| marko \| 2009-06-30 05:15:22 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: fseg_validate(): Enclose in #ifdef UNIV_DEBUG. This function is unused, but it could turn out to be a useful debugging aid. ------------------------------------------------------------------------ r5441 \| marko \| 2009-06-30 06:30:14 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: ha_delete(): Remove this unused function that was very similar to ha_search_and_delete_if_found(). ------------------------------------------------------------------------ r5442 \| marko \| 2009-06-30 06:45:41 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: lock_is_on_table(), lock_table_unlock(): Unused, remove. ------------------------------------------------------------------------ r5443 \| marko \| 2009-06-30 07:03:00 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: os_event_create_auto(): Unused, remove. ------------------------------------------------------------------------ r5444 \| marko \| 2009-06-30 07:19:49 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: que_graph_try_free(): Unused, remove. ------------------------------------------------------------------------ r5445 \| marko \| 2009-06-30 07:28:11 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: row_build_row_ref_from_row(): Unused, remove. ------------------------------------------------------------------------ r5446 \| marko \| 2009-06-30 07:35:45 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: srv_que_round_robin(), srv_que_task_enqueue(): Unused, remove. ------------------------------------------------------------------------ r5447 \| marko \| 2009-06-30 07:37:58 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: srv_que_task_queue_check(): Unused, remove. ------------------------------------------------------------------------ r5448 \| marko \| 2009-06-30 07:56:36 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: mem_heap_cat(): Unused, remove. ------------------------------------------------------------------------ r5449 \| marko \| 2009-06-30 08:00:50 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: innobase_start_or_create_for_mysql(): Invoke os_get_os_version() at most once. ------------------------------------------------------------------------ r5450 \| marko \| 2009-06-30 08:02:20 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: os_file_close_no_error_handling(): Unused, remove. ------------------------------------------------------------------------ r5451 \| marko \| 2009-06-30 08:09:49 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: page_set_max_trx_id(): Make the code compile with UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5452 \| marko \| 2009-06-30 08:10:26 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: os_file_close_no_error_handling(): Restore, as this function is used within InnoDB Hot Backup. ------------------------------------------------------------------------ r5453 \| marko \| 2009-06-30 08:14:01 -0400 (Tue, 30 Jun 2009) \| 1 line branches/zip: os_process_set_priority_boost(): Unused, remove. ------------------------------------------------------------------------ r5454 \| marko \| 2009-06-30 08:42:52 -0400 (Tue, 30 Jun 2009) \| 2 lines branches/zip: Replace a non-ASCII character (ISO 8859-1 encoded U+00AD SOFT HYPHEN) with a cheap ASCII substitute. ------------------------------------------------------------------------ r5456 \| inaam \| 2009-06-30 14:21:09 -0400 (Tue, 30 Jun 2009) \| 4 lines branches/zip Non functional change. s/Percona/Percona Inc./ ------------------------------------------------------------------------ r5470 \| vasil \| 2009-07-02 09:12:36 -0400 (Thu, 02 Jul 2009) \| 16 lines branches/zip: Use PAUSE instruction inside spinloop if it is available. The patch was originally developed by Mikael Ronstrom <mikael@mysql.com> and can be found here: http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2768 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2771 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2772 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2774 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2777 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2799 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2800 Approved by: Heikki (rb://137) ------------------------------------------------------------------------ r5481 \| vasil \| 2009-07-06 13:16:32 -0400 (Mon, 06 Jul 2009) \| 4 lines branches/zip: Remove unnecessary quotes and simplify plug.in. ------------------------------------------------------------------------ r5482 \| calvin \| 2009-07-06 18:36:35 -0400 (Mon, 06 Jul 2009) \| 5 lines branches/zip: add COPYING files for Percona and Sun Micro. 1.0.4 contains patches based on contributions from Percona and Sun Microsystems. ------------------------------------------------------------------------ r5483 \| calvin \| 2009-07-07 05:36:43 -0400 (Tue, 07 Jul 2009) \| 3 lines branches/zip: add IB_HAVE_PAUSE_INSTRUCTION to CMake. Windows will support PAUSE instruction by default. ------------------------------------------------------------------------ r5484 \| inaam \| 2009-07-07 18:57:14 -0400 (Tue, 07 Jul 2009) \| 13 lines branches/zip rb://126 Based on contribution from Google Inc. This patch introduces a new parameter innodb_io_capacity to control the rate at which master threads performs various tasks. The default value is 200 and higher values imply more aggressive flushing and ibuf merges from within the master thread. This patch also changes the ibuf merge from synchronous to asynchronous. Another minor change is not to force the master thread to wait for a log flush to complete every second. Approved by: Heikki ------------------------------------------------------------------------ r5485 \| inaam \| 2009-07-07 19:00:49 -0400 (Tue, 07 Jul 2009) \| 18 lines branches/zip rb://138 The current implementation is to try to flush the neighbors of every page that we flush. This patch makes the following distinction: 1) If the flush is from flush_list AND 2) If the flush is intended to move the oldest_modification LSN ahead (this happens when a user thread sees little space in the log file and attempts to flush pages from the buffer pool so that a checkpoint can be made) THEN Do not try to flush the neighbors. Just focus on flushing dirty pages at the end of flush_list Approved by: Heikki ------------------------------------------------------------------------ r5486 \| inaam \| 2009-07-08 12:11:40 -0400 (Wed, 08 Jul 2009) \| 29 lines branches/zip rb://133 This patch introduces heuristics based flushing rate of dirty pages to avoid IO bursts at checkpoint. 1) log_capacity / log_generated per second gives us number of seconds in which ALL dirty pages need to be flushed. Based on this rough assumption we can say that n_dirty_pages / (log_capacity / log_generation_rate) = desired_flush_rate 2) We use weighted averages (hard coded to 20 seconds) of log_generation_rate to avoid resonance. 3) From the desired_flush_rate we subtract the number of pages that have been flushed due to LRU flushing. That gives us pages that we should flush as part of flush_list cleanup. And that is the number (capped by maximum io_capacity) that we try to flush from the master thread. Knobs: ====== innodb_adaptive_flushing: boolean, global, dynamic, default TRUE. Since this heuristic is very experimental and has the potential to dramatically change the IO pattern I think it is a good idea to leave a knob to turn it off. Approved by: Heikki ------------------------------------------------------------------------ r5487 \| calvin \| 2009-07-08 12:42:28 -0400 (Wed, 08 Jul 2009) \| 7 lines branches/zip: fix PAUSE instruction patch on Windows The original PAUSE instruction patch (r5470) does not compile on Windows. Also, there is an elegant way of doing it on Windows - YieldProcessor(). Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5489 \| vasil \| 2009-07-10 05:02:22 -0400 (Fri, 10 Jul 2009) \| 9 lines branches/zip: Change the defaults for innodb_sync_spin_loops: 20 -> 30 innodb_spin_wait_delay: 5 -> 6 This change was proposed by Sun/MySQL based on their performance testing, see https://svn.innodb.com/innobase/Release_tasks_for_InnoDB_Plugin_V1.0.4 ------------------------------------------------------------------------ r5490 \| vasil \| 2009-07-10 05:04:20 -0400 (Fri, 10 Jul 2009) \| 4 lines branches/zip: Add ChangeLog entry for 5489. ------------------------------------------------------------------------ r5491 \| calvin \| 2009-07-10 12:19:17 -0400 (Fri, 10 Jul 2009) \| 6 lines branches/zip: add copyright info to files related to PAUSE instruction patch, contributed by Sun Microsystems. ------------------------------------------------------------------------ r5492 \| calvin \| 2009-07-10 17:47:34 -0400 (Fri, 10 Jul 2009) \| 5 lines branches/zip: add ChangeLog entries for r5484-r5486. ------------------------------------------------------------------------ r5494 \| vasil \| 2009-07-13 03:37:35 -0400 (Mon, 13 Jul 2009) \| 6 lines branches/zip: Restore the original value of innodb_sync_spin_loops at the end, previously the test assumed that setting it to 20 will do this, but now the default is 30 and MTR's internal check failed. ------------------------------------------------------------------------ r5495 \| inaam \| 2009-07-13 11:48:45 -0400 (Mon, 13 Jul 2009) \| 5 lines branches/zip rb://138 (REVERT) Revert the flush neighbors patch as it shows regression in the benchmarks run by Michael. ------------------------------------------------------------------------ r5496 \| inaam \| 2009-07-13 14:04:57 -0400 (Mon, 13 Jul 2009) \| 4 lines branches/zip Fixed warnings on windows where ulint != ib_uint64_t ------------------------------------------------------------------------ r5497 \| calvin \| 2009-07-13 15:01:00 -0400 (Mon, 13 Jul 2009) \| 9 lines branches/zip: fix run-time symbols clash on Solaris. This patch is from Sergey Vojtovich of Sun Microsystems, to fix run-time symbols clash on Solaris with older C++ compiler: - when finding out a way to hide symbols, make decision basing on compiler, not operating system. - Sun Studio supports __hidden declaration specifier for this purpose. ------------------------------------------------------------------------ r5498 \| vasil \| 2009-07-14 03:16:18 -0400 (Tue, 14 Jul 2009) \| 92 lines branches/zip: Merge r5341:5497 from branches/5.1, skipping: c5419 because it is merge from branches/zip into branches/5.1 c5466 because the source code has been adjusted to match the MySQL behavior and the innodb-autoinc test does not fail in branches/zip, if c5466 is merged, then innodb-autoinc starts failing, Sunny suggested not to merge c5466. and resolving conflicts in c5410, c5440, c5488: ------------------------------------------------------------------------ r5410 \| marko \| 2009-06-24 22:26:34 +0300 (Wed, 24 Jun 2009) \| 2 lines Changed paths: M /branches/5.1/include/trx0sys.ic M /branches/5.1/trx/trx0purge.c M /branches/5.1/trx/trx0sys.c M /branches/5.1/trx/trx0undo.c branches/5.1: Add missing #include "mtr0log.h" to avoid warnings when compiling with -DUNIV_MUST_NOT_INLINE. ------------------------------------------------------------------------ r5419 \| marko \| 2009-06-25 16:11:57 +0300 (Thu, 25 Jun 2009) \| 18 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb_bug42101-nonzero.result M /branches/5.1/mysql-test/innodb_bug42101-nonzero.test M /branches/5.1/mysql-test/innodb_bug42101.result M /branches/5.1/mysql-test/innodb_bug42101.test branches/5.1: Merge r5418 from branches/zip: ------------------------------------------------------------------------ r5418 \| marko \| 2009-06-25 15:55:52 +0300 (Thu, 25 Jun 2009) \| 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc M /branches/zip/mysql-test/innodb_bug42101-nonzero.result M /branches/zip/mysql-test/innodb_bug42101-nonzero.test M /branches/zip/mysql-test/innodb_bug42101.result M /branches/zip/mysql-test/innodb_bug42101.test branches/zip: Fix a race condition caused by SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749) When innodb_commit_concurrency is initially set nonzero, DEFAULT would change it back to 0, triggering Bug #42101. rb://139 approved by Heikki Tuuri. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5440 \| vasil \| 2009-06-30 13:04:29 +0300 (Tue, 30 Jun 2009) \| 8 lines Changed paths: M /branches/5.1/fil/fil0fil.c branches/5.1: Fix Bug#45814 URL reference in InnoDB server errors needs adjusting to match documentation by changing the URL from http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html to http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting-datadict.html ------------------------------------------------------------------------ r5466 \| vasil \| 2009-07-02 10:46:45 +0300 (Thu, 02 Jul 2009) \| 6 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Adjust the failing innodb-autoinc test to conform to the latest behavior of the MySQL code. The idea and the comment in innodb-autoinc.test come from Sunny. ------------------------------------------------------------------------ r5488 \| vasil \| 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) \| 13 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug21704.result A /branches/5.1/mysql-test/innodb_bug21704.test branches/5.1: Fix Bug#21704 Renaming column does not update FK definition by checking whether a column that participates in a FK definition is being renamed and denying the ALTER in this case. The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>: http://lists.mysql.com/commits/77714 and was later adjusted to conform to InnoDB coding style by me (Vasil), I also added some more comments and moved the bug specific mysql-test to a separate file to make it more manageable and flexible. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5499 \| calvin \| 2009-07-14 12:55:10 -0400 (Tue, 14 Jul 2009) \| 3 lines branches/zip: add a missing file in Makefile.am This change was suggested by MySQL. ------------------------------------------------------------------------ r5500 \| calvin \| 2009-07-14 13:03:26 -0400 (Tue, 14 Jul 2009) \| 3 lines branches/zip: minor change Remove an extra "with". ------------------------------------------------------------------------ r5501 \| vasil \| 2009-07-14 13:58:15 -0400 (Tue, 14 Jul 2009) \| 5 lines branches/zip: Add @ZLIB_INCLUDES@ so that the InnoDB Plugin picks up the same zlib.h header file that is eventually used by mysqld. ------------------------------------------------------------------------ r5502 \| vasil \| 2009-07-14 13:59:59 -0400 (Tue, 14 Jul 2009) \| 4 lines branches/zip: Add include/ut0auxconf.h to noinst_HEADERS ------------------------------------------------------------------------ r5503 \| vasil \| 2009-07-14 14:16:11 -0400 (Tue, 14 Jul 2009) \| 8 lines branches/zip: Non-functional change: put files in noinst_HEADERS and libinnobase_a_SOURCES one per line and sort alphabetically, so it is easier to find if a file is there or not and also diffs show exactly the added or removed file instead of surrounding lines too. ------------------------------------------------------------------------ r5504 \| calvin \| 2009-07-15 04:58:44 -0400 (Wed, 15 Jul 2009) \| 6 lines branches/zip: fix compile errors on Win64 Both srv_read_ahead_factor and srv_io_capacity should be defined as ulong. Approved by: Sunny ------------------------------------------------------------------------ r5508 \| calvin \| 2009-07-16 09:40:47 -0400 (Thu, 16 Jul 2009) \| 16 lines branches/zip: Support inlining of functions and prefetch with Sun Studio Those changes are contributed by Sun/MySQL. Two sets of changes in this patch when Sun Studio is used: - Explicit inlining of functions - Prefetch Support This patch has been tested by Sunny with the plugin statically built in. Since we've never built the plugin as a dynamically loaded module on Solaris, it is a separate task to change plug.in. rb://142 Approved by: Heikki ------------------------------------------------------------------------ r5509 \| calvin \| 2009-07-16 09:45:28 -0400 (Thu, 16 Jul 2009) \| 2 lines branches/zip: add ChangeLog entry for r5508. ------------------------------------------------------------------------ r5512 \| sunny \| 2009-07-19 19:52:48 -0400 (Sun, 19 Jul 2009) \| 2 lines branches/zip: Remove unused extern ref to timed_mutexes. ------------------------------------------------------------------------ r5513 \| sunny \| 2009-07-19 19:58:43 -0400 (Sun, 19 Jul 2009) \| 2 lines branches/zip: Undo r5512 ------------------------------------------------------------------------ r5514 \| sunny \| 2009-07-19 20:08:49 -0400 (Sun, 19 Jul 2009) \| 2 lines branches/zip: Only use my_bool when UNIV_HOTBACKUP is not defined. ------------------------------------------------------------------------ r5515 \| sunny \| 2009-07-20 03:29:14 -0400 (Mon, 20 Jul 2009) \| 2 lines branches/zip: The dict_table_t::autoinc_mutex field is not used in HotBackup. ------------------------------------------------------------------------ r5516 \| sunny \| 2009-07-20 03:46:05 -0400 (Mon, 20 Jul 2009) \| 4 lines branches/zip: Make this file usable from within HotBackup. A new file has been introduced called hb_univ.i. This file should have all the HotBackup specific configuration. ------------------------------------------------------------------------ r5517 \| sunny \| 2009-07-20 03:55:11 -0400 (Mon, 20 Jul 2009) \| 2 lines Add / UNIV_HOTBACK */ ------------------------------------------------------------------------ r5519 \| vasil \| 2009-07-20 04:45:18 -0400 (Mon, 20 Jul 2009) \| 31 lines branches/zip: Merge r5497:5518 from branches/5.1: ------------------------------------------------------------------------ r5518 \| vasil \| 2009-07-20 11:29:47 +0300 (Mon, 20 Jul 2009) \| 22 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2874.2.1 committer: Anurag Shekhar <anurag.shekhar@sun.com> branch nick: mysql-5.1-bugteam-windows-warning timestamp: Wed 2009-05-13 15:41:24 +0530 message: Bug #39802 On Windows, 32-bit time_t should be enforced This patch fixes compilation warning, "conversion from 'time_t' to 'ulong', possible loss of data". The fix is to typecast time_t to ulong before assigning it to ulong. Backported this from 6.0-bugteam tree. modified: storage/archive/ha_archive.cc storage/federated/ha_federated.cc storage/innobase/handler/ha_innodb.cc storage/myisam/ha_myisam.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5520 \| vasil \| 2009-07-20 04:51:47 -0400 (Mon, 20 Jul 2009) \| 4 lines branches/zip: Add ChangeLog entries for r5498 and r5519. ------------------------------------------------------------------------ r5524 \| inaam \| 2009-07-20 12:23:15 -0400 (Mon, 20 Jul 2009) \| 9 lines branches/zip Change the read ahead parameter name to innodb_read_ahead_threshold. Change the meaning of this parameter to signify the number of pages that must be sequentially accessed for InnoDB to trigger a readahead request. Suggested by: Ken ------------------------------------------------------------------------	17 years ago
inaam	e6e892f2e2	branches/zip Fixed warnings on windows where ulint != ib_uint64_t	17 years ago
inaam	9af090cb0e	branches/zip Fixed warnings on windows where ulint != ib_uint64_t	17 years ago

28 Commits (4c50120d1400eab236af70d36f1c683d2b30d59a)