mariadb

Commit Graph

Author	SHA1	Message	Date
Karen Langford	dacaaf22a3	Fixes required to build on AIX	14 years ago
Jon Olav Hauglid	0e28aa2f1c	Followup to Bug #11752069 (former bug 43152) Assertion `bitmap_is_set_all(&table->s->all_set)' failed in handler::ha_reset This followup fixes the compilation warning 'test_bit' may be used uninitialized in this function introduced by the previous patch.	15 years ago
Jon Olav Hauglid	6ad0c9b16d	Bug #11752069 (former bug 43152) Assertion `bitmap_is_set_all(&table->s->all_set)' failed in handler::ha_reset This assertion could be triggered if two connections simultaneously executed two bitmap test functions on the same bitmap. For example, the assertion could be triggered if one connection executed UPDATE while a second connection executed SELECT on the same table. Even if bitmap test functions have read-only semantics and have const bitmaps as parameter, several of them modified the internal state of the bitmap. With interleaved execution of two such functions it was possible for one function to modify the state of the same bitmap that the other function had just modified. This lead to an inconsistent state and could trigger the assert. Internally the bitmap uses 32 bit words for storage. Since bitmaps can contain any number of bits, the last word in the bitmap may not be fully used. A 32 bit mask is maintained where a bit is set if the corresponding bit in the last bitmap word is unused. The problem was that several test functions applied this mask to the last word. Sometimes the mask was negated and used to zero out the remainder of the last word and sometimes the mask was used as-is to fill the remainder of the last word with 1's. This meant that if a function first used the negated mask and another function then used the mask as-is (or vice-versa), the first function would then get the wrong result. This patch fixes the problem by changing the implementation of 9 bitmap functions that modified the bitmap state even if the bitmap was declared const. These functions now preserve the internal state of the bitmap. This makes it possible for two connections to concurrently execute two of these functions on the same bitmap without issues. The patch also removes dead testing code from my_bitmap.c. These tests have already been moved to unittest/mysys/bitmap-t.c. Existing test coverage of my_bitmap has been extended. No MTR test case added as this would require adding several sync points to the bitmap functions. The patch has been tested with a non-deterministic test case posted on the bug report. include/my_bit.h: Removed my_count_bits_ushort() which is not needed anymore. Added my_count_bits_uint32(). unittest/mysys/bitmap-t.c: Extended test coverage of my_bitmap.	15 years ago
Davi Arnaut	b5bb13ec03	Bug#45288: pb2 returns a lot of compilation warnings Fix assorted compiler warnings. include/my_pthread.h: Like for pthread_cond_timedwait, the abstime is constant. mysys/my_gethwaddr.c: Instead of using a manual copy that introduce warnings due to type mismatch, copy the buffer using memcpy and use memcmp to check whether all bytes of the buffer are zeroed. mysys/thr_mutex.c: Like for pthread_cond_timedwait, the abstime is constant. unittest/mytap/tap.h: Introduce a ok() variant that does not take a format argument. Since ok() is tagged with a printf attribute, GCC complains if the fmt argument is NULL.	15 years ago
Alexander Barkov	6f6a3e5293	Postfix for BUG#45012. Problem: The original patch didn't compile on debug_werror due to wrong format in printf("%d") for size_t variables. Fix: Adding cast to (int).	16 years ago
Alexander Barkov	e57a9d6fe0	Bug#45012 my_like_range_cp932 generates invalid string Problem: The functions my_like_range_xxx() returned badly formed maximum strings for Asian character sets, which made problems for storage engines. Fix: - Removed a number my_like_range_xxx() implementations, which were in fact dumplicate code pieces. - Using generic my_like_range_mb() instead. - Setting max_sort_char member properly for Asian character sets - Adding unittest/strings/strings-t.c, to test that my_like_range_xxx() return well-formed min and max strings. Notes: - No additional tests in mysql/t/ available. Old tests cover the affected code well enough.	16 years ago
Davi Arnaut	cd41cd953d	Bug#22320: my_atomic-t unit test fails The atomic operations implementation on 5.1 has a few problems, which might cause tests to abort randomly. Since no code in 5.1 uses atomic operations, simply remove the code.	16 years ago
Tor Didriksen	a24df71e95	Backport of Bug#53303 mytap tests should always have a plan() The bug was caused by buffered output. Flushing resolved it. We still recommend to allways call plan(). Also fix some compile warnings (formal parameter different from declaration) unittest/examples/Makefile.am: Omit core-t, since it will always fail. unittest/examples/no_plan-t.c: Comment that we recommend calling plan(NO_PLAN) unittest/mytap/tap.c: Use the named constant NO_PLAN Flush all output. unittest/mytap/tap.h: Change documentation for the plan() function.	16 years ago
Staale Smedseng	6a89842e36	Bug #43414 Parenthesis (and other) warnings compiling MySQL with gcc 4.3.2 Cleaning up warnings not present in 5.0.	16 years ago
Joerg Bruehe	db89051656	Fix bug#46980 Option "--without-server" still not working in 5.1 The general approach is to make sure that source files which require thread support are only compiled if the build really needs thread support, which means when the server is built or a thread-safe client library. This required several changes: - Make sure the subdirectories "storage/" and "plugin/" are only processed if the server is built, not ifclient-only. - Make the compilation of some modules which inherently require threading depend on thread supportin the build. - Separate the handling of threading in "configure.in" from that of server issues, threading is also needed in a non-server build of a thread-safe client library. Also, "libdbug" must get built even in a client-only build, so "dbug/" must be in the list of client directories. In addition, calls to thread functions in source files which can be built without thread support must use the wrapper functions which handle the non-threaded build. So the modules "client/mysqlimport.c" and "client/mysqlslap.c" must call "my_thread_end()" only via "mysql_thread_end()". Makefile.am: The directories "storage/" and "plugin/" contain files which are needed for the server only, so their contents is to be built only if a server is built. They must not be named unconditionally, because building their contents will fail unless threads are enabled. These directories are now listed in the "configure" variable "sql_server_dirs" which becomes part of "sql_union_dirs" if the server is to be built. client/mysqlimport.c: Use the wrapper function "mysql_thread_end()" which correctly handles the case of a non-threaded build. client/mysqlslap.c: Use the wrapper function "mysql_thread_end()" which correctly handles the case of a non-threaded build. configure.in: Various changes to support builds "--without-server": 1) For the unit tests, we need "libdbug". 2) Separate the treatment of the server from that of the thread-safe client library. 3) Introduce an "automake conditional" "NEED_THREAD" which can be checked in some "Makefile.am". 4) Include "storage/" and "plugin/" in the list of "sql_server_dirs" so that they are handled in the top "Makefile.am" only if the server is to be built (see the change in that file). mysys/Makefile.am: The code of "mf_keycache.c" in 5.1 is no longer safe to be built without thread support. (In 5.0, this was possible.) Rather than fix these issues, which is tedious and risky, avoid the need to ever build it without thread support: It is needed in the server only, which needs thread support. The only case where we build a "libmysys" without thread support is for a non-threaded client, where "mf_keycache" is not neded. So its inclusion in the list of source files can depend on the new conditional "NEED_THREAD". unittest/mysys/Makefile.am: Test program "my_atomic-t" is to verify the correct handling of threads only, it cannot be built without thread support and is not needed in such cases either. Let its build depend on the new conditional "NEED_THREAD".	16 years ago
unknown	85213f6235	Fix for server bug experienced in Maria (wrong "Truncated incorrect <var_name> value" error even though the value was correct): a C function in my_getopt.c was taking bool* in parameter and was called from C++ sql_plugin.cc, but on some Mac OS X sizeof(bool) is 1 in C and 4 in C++, giving funny mismatches. Fixed, all other occurences of bool in C are removed, future ones are blocked by a "C-bool-catcher" in my_global.h (use my_bool). client/mysqldump.c: my_bool for C client/mysqltest.c: my_bool for C extra/replace.c: my_bool for C include/my_getopt.h: my_bool for C include/my_global.h: Prevent people from using bool in C, it causes real bugs. include/my_sys.h: my_bool for C include/my_time.h: my_bool for C include/thr_lock.h: my_bool for C libmysql/libmysql.c: my_bool for C mysys/charset.c: my_bool for C mysys/my_getopt.c: my_bool for C mysys/queues.c: my_bool for C mysys/thr_lock.c: my_bool for C regex/reginit.c: my_bool for C sql/set_var.cc: C functions use my_bool so we must use my_bool too. sql/sql_plugin.cc: C functions use my_bool so we must use my_bool too. This fixes a real observed bug of Maria, because on some Mac OS X, sizeof(bool) is 1 in C and 4 in C++, so the bool* does wrong. Removing useless line. storage/heap/hp_update.c: my_bool for C storage/myisam/mi_check.c: my_bool for C storage/myisam/mi_dynrec.c: my_bool for C storage/myisam/mi_search.c: my_bool for C storage/myisam/mi_update.c: my_bool for C storage/myisam/mi_write.c: my_bool for C storage/myisam/myisamdef.h: my_bool for C storage/myisam/myisamlog.c: my_bool for C storage/myisam/myisampack.c: my_bool for C tests/mysql_client_test.c: my_bool for C unittest/mysys/bitmap-t.c: my_bool for C vio/viosslfactories.c: my_bool for C	18 years ago
unknown	3e756a80d4	my_atomic-t.c: gcc bug workaround unittest/mysys/my_atomic-t.c: gcc bug workaround	18 years ago
unknown	0c9a3e597d	Fixes Bug#30127: --debug-info no longer prints memory usage in mysql Fixed compiler warnings, errors and link errors Fixed new bug on Solaris with gethrtime() Added --debug-check option to all mysql clients to print errors and memory leaks Added --debug-info to all clients. This now works as --debug-check but also prints memory and cpu usage BUILD/compile-solaris-sparc-debug: Remove old cpu options client/client_priv.h: Added OPT_DBUG_CHECK client/mysql.cc: --debug-info now prints memory usage Added --debug-check client/mysql_upgrade.c: --debug-info now prints memory usage Added --debug-check client/mysqladmin.cc: --debug-info now prints memory usage Added --debug-check client/mysqlbinlog.cc: --debug-info now prints memory usage Added --debug-check client/mysqlcheck.c: --debug-info now prints memory usage Added --debug-check client/mysqldump.c: --debug-info now prints memory usage Added --debug-check client/mysqlimport.c: --debug-info now prints memory usage Added --debug-check client/mysqlshow.c: --debug-info now prints memory usage Added --debug-check client/mysqlslap.c: --debug-info now prints memory usage Added --debug-check client/mysqltest.c: --debug-info now prints memory usage Added --debug-check include/my_sys.h: Added extra option to TERMINATE to not print statistics libmysql/libmysql.c: Fixed compiler warning mysql-test/mysql-test-run.pl: --debug-info -> --debug-check to not print memory usage mysys/my_getsystime.c: Moved fast time calculation to my_micro_time_and_time() Fixed bug in previous push related to HAVE_GETHRTIME mysys/my_init.c: Print not freed memory in my_end() if MY_CHECK_ERROR is given mysys/my_static.c: Cleanup mysys/safemalloc.c: Added extra option to TERMINATE to not print statistics sql/item_xmlfunc.cc: Fixed compiler warning sql/sql_test.cc: Fixed TERMINATE() call unittest/mysys/base64-t.c: Fixed link error unittest/mysys/bitmap-t.c: Fixed link error unittest/mysys/my_atomic-t.c: Fixed link error	19 years ago
unknown	8fb480ef50	Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory plugin/daemon_example/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory plugin/fulltext/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory unittest/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory unittest/examples/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory unittest/mysys/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory unittest/mytap/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory unittest/mytap/t/Makefile.am: Consistent use of '%::SCCS/s.%' to prevent some 'make' implementations from trying to update files in SCCS directory	19 years ago
unknown	a263017494	remove unnecessary line	19 years ago
unknown	f68789007f	base64-t.c: Calculate and output line count first to be compatible with older versions of Test::Harness unittest/mysys/base64-t.c: Calculate and output line count first to be compatible with older versions of Test::Harness	19 years ago
unknown	4df381fdbe	After merge fix	19 years ago
unknown	d73b5b8e83	Many files: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header Added GPL copyright text my_vle.h, rpl_utility.h, my_vle.c, base64-t.c, rpl_utility.cc: Changed copyright header formatting some plugin_example.c, daemon_example.c: Added "Copyright (C) 2006 MySQL AB" to GPL header CMakeLists.txt: Added GPL copyright text client/CMakeLists.txt: Added GPL copyright text dbug/CMakeLists.txt: Added GPL copyright text extra/CMakeLists.txt: Added GPL copyright text extra/yassl/CMakeLists.txt: Added GPL copyright text extra/yassl/taocrypt/CMakeLists.txt: Added GPL copyright text libmysql/CMakeLists.txt: Added GPL copyright text libmysqld/CMakeLists.txt: Added GPL copyright text libmysqld/examples/CMakeLists.txt: Added GPL copyright text mysys/CMakeLists.txt: Added GPL copyright text regex/CMakeLists.txt: Added GPL copyright text server-tools/instance-manager/CMakeLists.txt: Added GPL copyright text sql/CMakeLists.txt: Added GPL copyright text storage/archive/CMakeLists.txt: Added GPL copyright text storage/blackhole/CMakeLists.txt: Added GPL copyright text storage/csv/CMakeLists.txt: Added GPL copyright text storage/example/CMakeLists.txt: Added GPL copyright text storage/federated/CMakeLists.txt: Added GPL copyright text storage/heap/CMakeLists.txt: Added GPL copyright text storage/innobase/CMakeLists.txt: Added GPL copyright text storage/myisam/CMakeLists.txt: Added GPL copyright text storage/myisammrg/CMakeLists.txt: Added GPL copyright text strings/CMakeLists.txt: Added GPL copyright text tests/CMakeLists.txt: Added GPL copyright text vio/CMakeLists.txt: Added GPL copyright text zlib/CMakeLists.txt: Added GPL copyright text include/my_vle.h: Changed copyright header formatting some mysys/my_vle.c: Changed copyright header formatting some plugin/daemon_example/daemon_example.c: Added "Copyright (C) 2006 MySQL AB" to GPL header plugin/fulltext/plugin_example.c: Added "Copyright (C) 2006 MySQL AB" to GPL header plugin/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/authors.h: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/contributors.h: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/item_xmlfunc.cc: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/partition_element.h: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/partition_info.h: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/rpl_injector.cc: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/rpl_injector.h: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/sql_binlog.cc: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/sql_servers.h: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header storage/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header storage/archive/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header storage/blackhole/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header storage/csv/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header storage/example/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header storage/federated/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header win/Makefile.am: Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header Adjusted year(s) in copyright header sql/rpl_utility.cc: Changed copyright header formatting some sql/rpl_utility.h: Changed copyright header formatting some unittest/mysys/base64-t.c: Changed copyright header formatting some include/my_uctype.h: Added GPL copyright text plugin/daemon_example/Makefile.am: Added GPL copyright text plugin/fulltext/Makefile.am: Added GPL copyright text scripts/make_win_bin_dist: Added GPL copyright text server-tools/instance-manager/user_management_commands.cc: Added GPL copyright text sql/sql_builtin.cc.in: Added GPL copyright text sql/sql_show.h: Added GPL copyright text storage/archive/archive_test.c: Added GPL copyright text storage/ndb/src/kernel/blocks/dbtup/test_varpage.cpp: Added GPL copyright text storage/ndb/src/kernel/blocks/diskpage.cpp: Added GPL copyright text storage/ndb/src/kernel/vm/Rope.cpp: Added GPL copyright text storage/ndb/src/mgmsrv/ParamInfo.hpp: Added GPL copyright text strings/uctypedump.c: Added GPL copyright text unittest/Makefile.am: Added GPL copyright text unittest/examples/Makefile.am: Added GPL copyright text unittest/examples/core-t.c: Added GPL copyright text unittest/examples/no_plan-t.c: Added GPL copyright text unittest/examples/simple-t.c: Added GPL copyright text unittest/examples/skip-t.c: Added GPL copyright text unittest/examples/skip_all-t.c: Added GPL copyright text unittest/examples/todo-t.c: Added GPL copyright text unittest/mysys/Makefile.am: Added GPL copyright text unittest/mytap/Makefile.am: Added GPL copyright text unittest/mytap/t/Makefile.am: Added GPL copyright text unittest/mytap/t/basic-t.c: Added GPL copyright text unittest/unit.pl: Added GPL copyright text win/build-vs71.bat: Added GPL copyright text win/build-vs8.bat: Added GPL copyright text win/configure.js: Added GPL copyright text	19 years ago
unknown	92e68d49d7	Many files: Changed header to GPL version 2 only client/mysqlslap.c: Changed header to GPL version 2 only include/atomic/nolock.h: Changed header to GPL version 2 only include/atomic/rwlock.h: Changed header to GPL version 2 only include/atomic/x86-gcc.h: Changed header to GPL version 2 only include/atomic/x86-msvc.h: Changed header to GPL version 2 only include/my_atomic.h: Changed header to GPL version 2 only include/my_trie.h: Changed header to GPL version 2 only include/my_vle.h: Changed header to GPL version 2 only include/mysql/plugin.h: Changed header to GPL version 2 only mysys/my_atomic.c: Changed header to GPL version 2 only mysys/my_getncpus.c: Changed header to GPL version 2 only mysys/my_memmem.c: Changed header to GPL version 2 only mysys/my_vle.c: Changed header to GPL version 2 only mysys/trie.c: Changed header to GPL version 2 only plugin/Makefile.am: Changed header to GPL version 2 only server-tools/instance-manager/IMService.h: Changed header to GPL version 2 only server-tools/instance-manager/WindowsService.h: Changed header to GPL version 2 only server-tools/instance-manager/exit_codes.h: Changed header to GPL version 2 only server-tools/instance-manager/user_management_commands.h: Changed header to GPL version 2 only sql/authors.h: Changed header to GPL version 2 only sql/contributors.h: Changed header to GPL version 2 only sql/event_data_objects.cc: Changed header to GPL version 2 only sql/event_data_objects.h: Changed header to GPL version 2 only sql/event_db_repository.cc: Changed header to GPL version 2 only sql/event_db_repository.h: Changed header to GPL version 2 only sql/event_queue.cc: Changed header to GPL version 2 only sql/event_queue.h: Changed header to GPL version 2 only sql/event_scheduler.cc: Changed header to GPL version 2 only sql/event_scheduler.h: Changed header to GPL version 2 only sql/events.cc: Changed header to GPL version 2 only sql/events.h: Changed header to GPL version 2 only sql/ha_ndbcluster_binlog.cc: Changed header to GPL version 2 only sql/ha_ndbcluster_binlog.h: Changed header to GPL version 2 only sql/ha_ndbcluster_tables.h: Changed header to GPL version 2 only sql/ha_partition.cc: Changed header to GPL version 2 only sql/ha_partition.h: Changed header to GPL version 2 only sql/item_xmlfunc.cc: Changed header to GPL version 2 only sql/item_xmlfunc.h: Changed header to GPL version 2 only sql/log.h: Changed header to GPL version 2 only sql/partition_element.h: Changed header to GPL version 2 only sql/partition_info.cc: Changed header to GPL version 2 only sql/partition_info.h: Changed header to GPL version 2 only sql/rpl_filter.cc: Changed header to GPL version 2 only sql/rpl_filter.h: Changed header to GPL version 2 only sql/rpl_injector.cc: Changed header to GPL version 2 only sql/rpl_injector.h: Changed header to GPL version 2 only sql/rpl_mi.cc: Changed header to GPL version 2 only sql/rpl_mi.h: Changed header to GPL version 2 only sql/rpl_rli.cc: Changed header to GPL version 2 only sql/rpl_rli.h: Changed header to GPL version 2 only sql/rpl_tblmap.cc: Changed header to GPL version 2 only sql/rpl_tblmap.h: Changed header to GPL version 2 only sql/rpl_utility.cc: Changed header to GPL version 2 only sql/rpl_utility.h: Changed header to GPL version 2 only sql/sql_binlog.cc: Changed header to GPL version 2 only sql/sql_partition.cc: Changed header to GPL version 2 only sql/sql_partition.h: Changed header to GPL version 2 only sql/sql_plugin.cc: Changed header to GPL version 2 only sql/sql_plugin.h: Changed header to GPL version 2 only sql/sql_servers.cc: Changed header to GPL version 2 only sql/sql_servers.h: Changed header to GPL version 2 only sql/sql_tablespace.cc: Changed header to GPL version 2 only sql/sql_yacc.yy.bak: Changed header to GPL version 2 only storage/Makefile.am: Changed header to GPL version 2 only storage/archive/Makefile.am: Changed header to GPL version 2 only storage/blackhole/Makefile.am: Changed header to GPL version 2 only storage/csv/Makefile.am: Changed header to GPL version 2 only storage/example/Makefile.am: Changed header to GPL version 2 only storage/federated/Makefile.am: Changed header to GPL version 2 only storage/innobase/handler/Makefile.am: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/AllocNodeId.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/CreateFilegroup.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/CreateFilegroupImpl.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/CreateObj.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/DictObjOp.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/DihFragCount.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/DropFilegroup.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/DropFilegroupImpl.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/DropObj.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/Extent.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/LgmanContinueB.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/PgmanContinueB.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/RestoreContinueB.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/RestoreImpl.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/RouteOrd.hpp: Changed header to GPL version 2 only storage/ndb/include/kernel/signaldata/TsmanContinueB.hpp: Changed header to GPL version 2 only storage/ndb/include/ndbapi/NdbIndexStat.hpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/mgmapi_logevent/mgmapi_logevent.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/mgmapi_logevent_dual/mgmapi_logevent_dual.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_async/ndbapi_async.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_async1/ndbapi_async1.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_event/ndbapi_event.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_retries/ndbapi_retries.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_scan/ndbapi_scan.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_simple/ndbapi_simple.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_simple_dual/ndbapi_simple_dual.cpp: Changed header to GPL version 2 only storage/ndb/ndbapi-examples/ndbapi_simple_index/ndbapi_simple_index.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbdih/printSysfile.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtup/DbtupDiskAlloc.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtup/DbtupVarAlloc.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtup/Undo_buffer.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtup/Undo_buffer.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtup/tuppage.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtup/tuppage.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/dbtux/DbtuxStat.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/diskpage.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/lgman.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/lgman.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/pgman.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/pgman.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/print_file.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/record_types.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/restore.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/restore.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/tsman.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/blocks/tsman.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/DLCFifoList.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/DLCHashTable.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/DynArr256.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/DynArr256.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/KeyTable2Ref.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/LinearPool.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/NdbdSuperPool.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/NdbdSuperPool.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/Pool.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/Pool.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/RWPool.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/RWPool.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/Rope.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/SLFifoList.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/WOPool.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/WOPool.hpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/bench_pool.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/ndbd_malloc_impl.cpp: Changed header to GPL version 2 only storage/ndb/src/kernel/vm/ndbd_malloc_impl.hpp: Changed header to GPL version 2 only storage/ndb/src/mgmsrv/ParamInfo.cpp: Changed header to GPL version 2 only storage/ndb/src/ndbapi/NdbIndexStat.cpp: Changed header to GPL version 2 only storage/ndb/test/ndbapi/testIndexStat.cpp: Changed header to GPL version 2 only storage/ndb/test/tools/listen.cpp: Changed header to GPL version 2 only storage/ndb/tools/restore/ndb_nodegroup_map.h: Changed header to GPL version 2 only strings/my_strchr.c: Changed header to GPL version 2 only unittest/mysys/base64-t.c: Changed header to GPL version 2 only unittest/mysys/bitmap-t.c: Changed header to GPL version 2 only unittest/mysys/my_atomic-t.c: Changed header to GPL version 2 only unittest/mytap/tap.c: Changed header to GPL version 2 only unittest/mytap/tap.h: Changed header to GPL version 2 only win/Makefile.am: Changed header to GPL version 2 only	19 years ago
unknown	733fb20dcd	Work around slow my_atomic-t test on hpux11: decrease number of iterations on this platform unittest/mysys/my_atomic-t.c: decrease number of iterations on hpux11 (to hopefully go from one hour to a few minutes).	19 years ago
unknown	788ad30f08	Fixed a LOT of compiler warnings Added missing DBUG_RETURN statements (in mysqldump.c) Added missing enums Fixed a lot of wrong DBUG_PRINT() statements, some of which could cause crashes Removed usage of %lld and %p in printf strings as these are not portable or produces different results on different systems. client/mysqldump.c: Fixed some compiler warnings Added some missing DBUG_RETURN Remove copying of 'cluster' database client/mysqlslap.c: Fixed compiler warnings client/mysqltest.c: After merge fix extra/yassl/taocrypt/include/algebra.hpp: Removed compiler warning mysql-test/include/im_check_env.inc: Fixed race condition (mysqld1 could report 'starting' or 'online' mysql-test/mysql-test-run.pl: After merge fixes Added missing directory to LD_LIBRARY_PATH mysql-test/r/ctype_cp1250_ch.result: After merge fix mysql-test/r/im_cmd_line.result: Fixed race condition mysql-test/r/im_daemon_life_cycle.result: Fixed race condition mysql-test/r/im_instance_conf.result: Fixed race condition mysql-test/r/im_life_cycle.result: Fixed race condition mysql-test/r/im_utils.result: Fixed race condition mysql-test/r/log_tables.result: Fixed wrong result mysql-test/t/disabled.def: Disabled ndb_restore_partion, as ndb_restore_compate caused it to fail, becasue of table 'cluster/def/schema' which is stored in ndb_backup50 mysys/my_compress.c: Removed compiler warnings mysys/my_getopt.c: Ensure we always have at least one space between option name and value plugin/fulltext/plugin_example.c: Removed compiler warnings server-tools/instance-manager/mysql_connection.cc: After merge fix sql/event_data_objects.cc: Fixed compiler warnings Fixed platform compatibility issues (%lld is not portable) sql/event_data_objects.h: Fixed compiler warnings sql/event_db_repository.cc: Fixed compiler warnings sql/event_queue.cc: Fixed compiler warnings sql/event_scheduler.cc: Fixed compiler warnings sql/events.cc: Fixed compiler warnings sql/field.cc: Fixed compiler warnings sql/ha_ndbcluster.cc: Fixed compiler warnings sql/ha_ndbcluster_binlog.cc: Fixed compiler warnings sql/ha_partition.cc: Fixed compiler warnings sql/handler.cc: Fixed compiler warnings sql/item_cmpfunc.cc: Fixed DBUG_PRINT style sql/item_func.cc: Fixed compiler warnings sql/log.cc: Fixed compiler warnings sql/log_event.cc: Fixed compiler warnings sql/mysqld.cc: Fixed compiler warnings sql/opt_range.cc: Fixed compiler warnings sql/repl_failsafe.cc: Indentation fixes sql/rpl_rli.cc: Fixed compiler warnings sql/rpl_tblmap.cc: Fixed compiler warnings sql/set_var.cc: Fixed compiler warnings sql/slave.cc: Fixed compiler warnings sql/sp_head.cc: Fixed compiler warnings sql/sql_base.cc: Fixed compiler warnings Fixed indentation sql/sql_binlog.cc: Fixed compiler warnings sql/sql_cache.cc: Fixed compiler warnings sql/sql_class.cc: Fixed compiler warnings sql/sql_handler.cc: Fixed compiler warnings sql/sql_lex.cc: Fixed compiler warnings sql/sql_parse.cc: Fixed compiler warnings sql/sql_partition.cc: Fixed compiler warnings sql/sql_prepare.cc: Fixed compiler warnings sql/sql_table.cc: Fixed compiler warnings sql/sql_test.cc: Fixed DBUG_PRINT style sql/sql_trigger.cc: Fixed DBUG_PRINT style sql/table.cc: Fixed compiler warnings storage/federated/ha_federated.cc: Fixed compiler warnings storage/myisam/mi_rsamepos.c: Fixed compiler warnings storage/ndb/include/ndb_global.h.in: After merge fix storage/ndb/include/util/NdbOut.hpp: Inform gcc that ndbout_c takes a printf() string as argument storage/ndb/include/util/SimpleProperties.hpp: After merge fixes storage/ndb/src/kernel/blocks/backup/Backup.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/cmvmi/Cmvmi.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbacc/DbaccMain.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbdict/Dbdict.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbdih/DbdihMain.cpp: Fixed compiler warnings Fixed usage of uninitialized value (Got help from Jonas with patch) storage/ndb/src/kernel/blocks/dblqh/DblqhMain.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/lgman.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/pgman.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/restore.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbtc/DbtcMain.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbtup/DbtupCommit.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbtup/DbtupDiskAlloc.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbtup/DbtupExecQuery.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/dbtup/DbtupFixAlloc.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/ndbfs/Ndbfs.cpp: Fixed compiler warnings storage/ndb/src/kernel/blocks/suma/Suma.cpp: Fixed compiler warnings Added missing enum's to switch storage/ndb/src/kernel/vm/Configuration.cpp: Fixed compiler warnings storage/ndb/src/kernel/vm/DLHashTable.hpp: Fixed compiler warnings storage/ndb/src/kernel/vm/RWPool.hpp: Fixed compiler warnings storage/ndb/src/kernel/vm/SimulatedBlock.cpp: Fixed compiler warnings storage/ndb/src/kernel/vm/WOPool.hpp: Fixed compiler warnings storage/ndb/src/kernel/vm/ndbd_malloc_impl.cpp: Fixed compiler warnings storage/ndb/src/mgmclient/CommandInterpreter.cpp: Fixed compiler warnings storage/ndb/src/mgmsrv/MgmtSrvr.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/DictCache.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/NdbDictionaryImpl.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/NdbIndexOperation.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/NdbIndexStat.cpp: Initialize possible uninitialized variable storage/ndb/src/ndbapi/NdbOperationInt.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/NdbRecAttr.cpp: Added missing enum's (To avoid compiler warnings) storage/ndb/src/ndbapi/NdbScanOperation.cpp: Fixed compiler warnings storage/ndb/src/ndbapi/ObjectMap.hpp: Fixed compiler warnings storage/ndb/tools/desc.cpp: Fixed compiler warnings storage/ndb/tools/restore/Restore.cpp: Fixed compiler warnings storage/ndb/tools/restore/consumer_restore.cpp: Fixed compiler warnings unittest/mytap/t/basic-t.c: Fixed compiler warnings unittest/mytap/tap.c: Fixed compiler warnings	19 years ago
unknown	ba53dc35eb	Documentation changes to MyTAP. unittest/README.txt: Adding reference to generated documentation unittest/mytap/Doxyfile: Some configuration changes to make Doxygen generate better documentation. unittest/mytap/tap.c: Adding documentation and tags unittest/mytap/tap.h: Adding tags to provide document-internal references.	19 years ago
unknown	cf3b25019c	unittest/mytap/tap.c : Do not (try to) set a signal handler action unless a signal is defined on the platform. unittest/mytap/tap.c: Do not (try to) set a signal handler action unless a signal is defined on the platform. SIGXCPU, SIGXFSZ, SIGSYS, and SIGTRAP were reported as undefined in Netware build of 5.1.12-beta.	19 years ago
unknown	2d4f71882f	BUG#19459 (BINLOG RBR command does not lock tables correctly causing crash for, e.g., NDB): Submitting patch to base64_decode() adding extra parameter. include/base64.h: Adding parameter to base64_decode() to return the position just after the string that was decoded. mysys/base64.c: Adding comment to base64_decode(). Adding parameter to base64_decode() to return the position just after the string that was decoded. sql/share/errmsg.txt: Adding error message. storage/ndb/src/mgmapi/mgmapi.cpp: Parameters to base64_decode() changed. unittest/mysys/base64-t.c: Parameters to base64_decode() changed.	19 years ago
unknown	6e10407c2b	WL#3504 "plugin actions for engines' and plugins' unit tests" for push in 5.1 (I will inform Trudy). Storage engines and plugins can now have unit tests to test their components; such test must be an executable C/C++ program which name ends with '-t' and which is obeys the mytap protocol, it must be stored in the storage engine's or plugin's source directory (storage/<engine> or plugin/<plugin>) or any subdirectories of this. The top-level Makefile target "test-unit" will run all unit tests: it will scan the engines' and plugins' directories, recursively, and execute all executable files which name ends with '-t'." Makefile.am: "unittest" directory must be built before "storage" and "plugin" because the unit tests in these directories may need libmytap.a which is in unittest/mytap. config/ac-macros/plugins.m4: When enabling engine "X", we add "../storage/X" to the unit tests directories which unittest/unit.pl should traverse looking for tests to execute. Same for plugins. unittest/Makefile.am: Those variables contain all enabled engines and plugins.	19 years ago
unknown	336bbb52b1	fixes for the my_atomic-t unit test: - compiler warning - detection of pthread_create failure (you will see this message only if you run with "make test-verbose" in unittest; otherwise unit.pl masks all messages from the test but "ok" ones. - the test fails randomly on some machines (I filed it as BUG#22320), on one host it looks like a crash at exit() which a sleep(2) makes disappear. So I add the sleep(2), which can be removed when BUG#22320 is fixed. unittest/mysys/my_atomic-t.c: - fix for compiler warning on 64-bit "cast from pointer to integer of different size". Casting to long and then to int. We'll use intptr instead later. - detect if pthread_create fails. - sleep(2) until BUG#22320 is fixed	19 years ago
unknown	207202aafa	Changes to make unit tests work on OS X and AIX unittest/unit.pl: Removing reliance on Straps, since it's to unstable.	20 years ago
unknown	1b8dad2b58	Various fixes to make MyTAP build on all platforms. unittest/Makefile.am: Not installing unit.pl any more. Adding test-verbose target to see the TAP output (for debugging). unittest/mytap/tap.h: Including portability file. Whitespace changes. Code sample for BAIL_OUT() function.	20 years ago
unknown	ac03e43364	Adding missing file unittest/examples/core-t.c: BitKeeper file /users/mkindahl/mysql-5.1-clone/unittest/examples/core-t.c	20 years ago
unknown	0220e4ff87	mytap-changes.patch unittest/Makefile.am: Import patch mytap-changes.patch unittest/README.txt: Import patch mytap-changes.patch unittest/examples/Makefile.am: Import patch mytap-changes.patch unittest/mytap/tap.c: Import patch mytap-changes.patch unittest/mytap/tap.h: Import patch mytap-changes.patch	20 years ago
unknown	dc2264ab86	Fixing unit test execution script to work with AIX 5.2 and OS X machines. These are using old version of the Test::Harness modules, so I resort to a safer way of running executable files. unittest/README.txt: Adding reference to Doxygen-generated documentation on the intranet. unittest/unit.pl: Using environment HARNESS_PERL_SWITCHES instead of a replacement straps	20 years ago
unknown	a042f18818	Changed the number of test iterations since this makes test time go from 623 seconds to 11 seconds on AMD64. This is because we have no native atomic implementation on AMD64, so the rwlock-based implementation is used, which is a bit slow. It will be probably be optimized for AMD64 quite soon, but for now this test case will do fewer iterations. unittest/mysys/my_atomic-t.c: 10k iterations instead of 1M no of iterations	20 years ago
unknown	d1fb292251	atomic ops: my_atomic_XX_t -> intXX, no implicit locking anymore simplified framework, support for requested cleanups dbug/dbug.c: compiler warning include/atomic/nolock.h: my_atomic_XX_t -> intXX include/atomic/rwlock.h: my_atomic_XX_t -> intXX, no implicit locking anymore include/atomic/x86-gcc.h: my_atomic_XX_t -> intXX, no implicit locking anymore include/atomic/x86-msvc.h: my_atomic_XX_t -> intXX simplified defines support for cleanups include/my_atomic.h: my_atomic_XX_t -> intXX, no implicit locking anymore simplified framework, support for requested cleanups unittest/examples/no_plan-t.c: compiler warning unittest/mysys/Makefile.am: fix for dependencies unittest/mysys/my_atomic-t.c: my_atomic_XX_t -> intXX, no implicit locking anymore unittest/mytap/tap.c: cosmetic fix	20 years ago
unknown	01d03e7b4b	This changeset is largely a handler cleanup changeset (WL#3281), but includes fixes and cleanups that was found necessary while testing the handler changes Changes that requires code changes in other code of other storage engines. (Note that all changes are very straightforward and one should find all issues by compiling a --debug build and fixing all compiler errors and all asserts in field.cc while running the test suite), - New optional handler function introduced: reset() This is called after every DML statement to make it easy for a handler to statement specific cleanups. (The only case it's not called is if force the file to be closed) - handler::extra(HA_EXTRA_RESET) is removed. Code that was there before should be moved to handler::reset() - table->read_set contains a bitmap over all columns that are needed in the query. read_row() and similar functions only needs to read these columns - table->write_set contains a bitmap over all columns that will be updated in the query. write_row() and update_row() only needs to update these columns. The above bitmaps should now be up to date in all context (including ALTER TABLE, filesort()). The handler is informed of any changes to the bitmap after fix_fields() by calling the virtual function handler::column_bitmaps_signal(). If the handler does caching of these bitmaps (instead of using table->read_set, table->write_set), it should redo the caching in this code. as the signal() may be sent several times, it's probably best to set a variable in the signal and redo the caching on read_row() / write_row() if the variable was set. - Removed the read_set and write_set bitmap objects from the handler class - Removed all column bit handling functions from the handler class. (Now one instead uses the normal bitmap functions in my_bitmap.c instead of handler dedicated bitmap functions) - field->query_id is removed. One should instead instead check table->read_set and table->write_set if a field is used in the query. - handler::extra(HA_EXTRA_RETRIVE_ALL_COLS) and handler::extra(HA_EXTRA_RETRIEVE_PRIMARY_KEY) are removed. One should now instead use table->read_set to check for which columns to retrieve. - If a handler needs to call Field->val() or Field->store() on columns that are not used in the query, one should install a temporary all-columns-used map while doing so. For this, we provide the following functions: my_bitmap_map old_map= dbug_tmp_use_all_columns(table, table->read_set); field->val(); dbug_tmp_restore_column_map(table->read_set, old_map); and similar for the write map: my_bitmap_map old_map= dbug_tmp_use_all_columns(table, table->write_set); field->val(); dbug_tmp_restore_column_map(table->write_set, old_map); If this is not done, you will sooner or later hit a DBUG_ASSERT in the field store() / val() functions. (For not DBUG binaries, the dbug_tmp_restore_column_map() and dbug_tmp_restore_column_map() are inline dummy functions and should be optimized away be the compiler). - If one needs to temporary set the column map for all binaries (and not just to avoid the DBUG_ASSERT() in the Field::store() / Field::val() methods) one should use the functions tmp_use_all_columns() and tmp_restore_column_map() instead of the above dbug_ variants. - All 'status' fields in the handler base class (like records, data_file_length etc) are now stored in a 'stats' struct. This makes it easier to know what status variables are provided by the base handler. This requires some trivial variable names in the extra() function. - New virtual function handler::records(). This is called to optimize COUNT() if (handler::table_flags() & HA_HAS_RECORDS()) is true. (stats.records is not supposed to be an exact value. It's only has to be 'reasonable enough' for the optimizer to be able to choose a good optimization path). - Non virtual handler::init() function added for caching of virtual constants from engine. - Removed has_transactions() virtual method. Now one should instead return HA_NO_TRANSACTIONS in table_flags() if the table handler DOES NOT support transactions. - The 'xxxx_create_handler()' function now has a MEM_ROOT_root argument that is to be used with 'new handler_name()' to allocate the handler in the right area. The xxxx_create_handler() function is also responsible for any initialization of the object before returning. For example, one should change: static handler myisam_create_handler(TABLE_SHARE table) { return new ha_myisam(table); } -> static handler myisam_create_handler(TABLE_SHARE table, MEM_ROOT mem_root) { return new (mem_root) ha_myisam(table); } - New optional virtual function: use_hidden_primary_key(). This is called in case of an update/delete when (table_flags() and HA_PRIMARY_KEY_REQUIRED_FOR_DELETE) is defined but we don't have a primary key. This allows the handler to take precisions in remembering any hidden primary key to able to update/delete any found row. The default handler marks all columns to be read. - handler::table_flags() now returns a ulonglong (to allow for more flags). - New/changed table_flags() - HA_HAS_RECORDS Set if ::records() is supported - HA_NO_TRANSACTIONS Set if engine doesn't support transactions - HA_PRIMARY_KEY_REQUIRED_FOR_DELETE Set if we should mark all primary key columns for read when reading rows as part of a DELETE statement. If there is no primary key, all columns are marked for read. - HA_PARTIAL_COLUMN_READ Set if engine will not read all columns in some cases (based on table->read_set) - HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS Renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION. - HA_DUPP_POS Renamed to HA_DUPLICATE_POS - HA_REQUIRES_KEY_COLUMNS_FOR_DELETE Set this if we should mark ALL key columns for read when when reading rows as part of a DELETE statement. In case of an update we will mark all keys for read for which key part changed value. - HA_STATS_RECORDS_IS_EXACT Set this if stats.records is exact. (This saves us some extra records() calls when optimizing COUNT(*)) - Removed table_flags() - HA_NOT_EXACT_COUNT Now one should instead use HA_HAS_RECORDS if handler::records() gives an exact count() and HA_STATS_RECORDS_IS_EXACT if stats.records is exact. - HA_READ_RND_SAME Removed (no one supported this one) - Removed not needed functions ha_retrieve_all_cols() and ha_retrieve_all_pk() - Renamed handler::dupp_pos to handler::dup_pos - Removed not used variable handler::sortkey Upper level handler changes: - ha_reset() now does some overall checks and calls ::reset() - ha_table_flags() added. This is a cached version of table_flags(). The cache is updated on engine creation time and updated on open. MySQL level changes (not obvious from the above): - DBUG_ASSERT() added to check that column usage matches what is set in the column usage bit maps. (This found a LOT of bugs in current column marking code). - In 5.1 before, all used columns was marked in read_set and only updated columns was marked in write_set. Now we only mark columns for which we need a value in read_set. - Column bitmaps are created in open_binary_frm() and open_table_from_share(). (Before this was in table.cc) - handler::table_flags() calls are replaced with handler::ha_table_flags() - For calling field->val() you must have the corresponding bit set in table->read_set. For calling field->store() you must have the corresponding bit set in table->write_set. (There are asserts in all store()/val() functions to catch wrong usage) - thd->set_query_id is renamed to thd->mark_used_columns and instead of setting this to an integer value, this has now the values: MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE Changed also all variables named 'set_query_id' to mark_used_columns. - In filesort() we now inform the handler of exactly which columns are needed doing the sort and choosing the rows. - The TABLE_SHARE object has a 'all_set' column bitmap one can use when one needs a column bitmap with all columns set. (This is used for table->use_all_columns() and other places) - The TABLE object has 3 column bitmaps: - def_read_set Default bitmap for columns to be read - def_write_set Default bitmap for columns to be written - tmp_set Can be used as a temporary bitmap when needed. The table object has also two pointer to bitmaps read_set and write_set that the handler should use to find out which columns are used in which way. - count() optimization now calls handler::records() instead of using handler->stats.records (if (table_flags() & HA_HAS_RECORDS) is true). - Added extra argument to Item::walk() to indicate if we should also traverse sub queries. - Added TABLE parameter to cp_buffer_from_ref() - Don't close tables created with CREATE ... SELECT but keep them in the table cache. (Faster usage of newly created tables). New interfaces: - table->clear_column_bitmaps() to initialize the bitmaps for tables at start of new statements. - table->column_bitmaps_set() to set up new column bitmaps and signal the handler about this. - table->column_bitmaps_set_no_signal() for some few cases where we need to setup new column bitmaps but don't signal the handler (as the handler has already been signaled about these before). Used for the momement only in opt_range.cc when doing ROR scans. - table->use_all_columns() to install a bitmap where all columns are marked as use in the read and the write set. - table->default_column_bitmaps() to install the normal read and write column bitmaps, but not signaling the handler about this. This is mainly used when creating TABLE instances. - table->mark_columns_needed_for_delete(), table->mark_columns_needed_for_delete() and table->mark_columns_needed_for_insert() to allow us to put additional columns in column usage maps if handler so requires. (The handler indicates what it neads in handler->table_flags()) - table->prepare_for_position() to allow us to tell handler that it needs to read primary key parts to be able to store them in future table->position() calls. (This replaces the table->file->ha_retrieve_all_pk function) - table->mark_auto_increment_column() to tell handler are going to update columns part of any auto_increment key. - table->mark_columns_used_by_index() to mark all columns that is part of an index. It will also send extra(HA_EXTRA_KEYREAD) to handler to allow it to quickly know that it only needs to read colums that are part of the key. (The handler can also use the column map for detecting this, but simpler/faster handler can just monitor the extra() call). - table->mark_columns_used_by_index_no_reset() to in addition to other columns, also mark all columns that is used by the given key. - table->restore_column_maps_after_mark_index() to restore to default column maps after a call to table->mark_columns_used_by_index(). - New item function register_field_in_read_map(), for marking used columns in table->read_map. Used by filesort() to mark all used columns - Maintain in TABLE->merge_keys set of all keys that are used in query. (Simplices some optimization loops) - Maintain Field->part_of_key_not_clustered which is like Field->part_of_key but the field in the clustered key is not assumed to be part of all index. (used in opt_range.cc for faster loops) - dbug_tmp_use_all_columns(), dbug_tmp_restore_column_map() tmp_use_all_columns() and tmp_restore_column_map() functions to temporally mark all columns as usable. The 'dbug_' version is primarily intended inside a handler when it wants to just call Field:store() & Field::val() functions, but don't need the column maps set for any other usage. (ie:: bitmap_is_set() is never called) - We can't use compare_records() to skip updates for handlers that returns a partial column set and the read_set doesn't cover all columns in the write set. The reason for this is that if we have a column marked only for write we can't in the MySQL level know if the value changed or not. The reason this worked before was that MySQL marked all to be written columns as also to be read. The new 'optimal' bitmaps exposed this 'hidden bug'. - open_table_from_share() does not anymore setup temporary MEM_ROOT object as a thread specific variable for the handler. Instead we send the to-be-used MEMROOT to get_new_handler(). (Simpler, faster code) Bugs fixed: - Column marking was not done correctly in a lot of cases. (ALTER TABLE, when using triggers, auto_increment fields etc) (Could potentially result in wrong values inserted in table handlers relying on that the old column maps or field->set_query_id was correct) Especially when it comes to triggers, there may be cases where the old code would cause lost/wrong values for NDB and/or InnoDB tables. - Split thd->options flag OPTION_STATUS_NO_TRANS_UPDATE to two flags: OPTION_STATUS_NO_TRANS_UPDATE and OPTION_KEEP_LOG. This allowed me to remove some wrong warnings about: "Some non-transactional changed tables couldn't be rolled back" - Fixed handling of INSERT .. SELECT and CREATE ... SELECT that wrongly reset (thd->options & OPTION_STATUS_NO_TRANS_UPDATE) which caused us to loose some warnings about "Some non-transactional changed tables couldn't be rolled back") - Fixed use of uninitialized memory in ha_ndbcluster.cc::delete_table() which could cause delete_table to report random failures. - Fixed core dumps for some tests when running with --debug - Added missing FN_LIBCHAR in mysql_rm_tmp_tables() (This has probably caused us to not properly remove temporary files after crash) - slow_logs was not properly initialized, which could maybe cause extra/lost entries in slow log. - If we get an duplicate row on insert, change column map to read and write all columns while retrying the operation. This is required by the definition of REPLACE and also ensures that fields that are only part of UPDATE are properly handled. This fixed a bug in NDB and REPLACE where REPLACE wrongly copied some column values from the replaced row. - For table handler that doesn't support NULL in keys, we would give an error when creating a primary key with NULL fields, even after the fields has been automaticly converted to NOT NULL. - Creating a primary key on a SPATIAL key, would fail if field was not declared as NOT NULL. Cleanups: - Removed not used condition argument to setup_tables - Removed not needed item function reset_query_id_processor(). - Field->add_index is removed. Now this is instead maintained in (field->flags & FIELD_IN_ADD_INDEX) - Field->fieldnr is removed (use field->field_index instead) - New argument to filesort() to indicate that it should return a set of row pointers (not used columns). This allowed me to remove some references to sql_command in filesort and should also enable us to return column results in some cases where we couldn't before. - Changed column bitmap handling in opt_range.cc to be aligned with TABLE bitmap, which allowed me to use bitmap functions instead of looping over all fields to create some needed bitmaps. (Faster and smaller code) - Broke up found too long lines - Moved some variable declaration at start of function for better code readability. - Removed some not used arguments from functions. (setup_fields(), mysql_prepare_insert_check_table()) - setup_fields() now takes an enum instead of an int for marking columns usage. - For internal temporary tables, use handler::write_row(), handler::delete_row() and handler::update_row() instead of handler::ha_xxxx() for faster execution. - Changed some constants to enum's and define's. - Using separate column read and write sets allows for easier checking of timestamp field was set by statement. - Remove calls to free_io_cache() as this is now done automaticly in ha_reset() - Don't build table->normalized_path as this is now identical to table->path (after bar's fixes to convert filenames) - Fixed some missed DBUG_PRINT(.."%lx") to use "0x%lx" to make it easier to do comparision with the 'convert-dbug-for-diff' tool. Things left to do in 5.1: - We wrongly log failed CREATE TABLE ... SELECT in some cases when using row based logging (as shown by testcase binlog_row_mix_innodb_myisam.result) Mats has promised to look into this. - Test that my fix for CREATE TABLE ... SELECT is indeed correct. (I added several test cases for this, but in this case it's better that someone else also tests this throughly). Lars has promosed to do this. BitKeeper/etc/ignore: added mysys/test_bitmap include/base64.h: Removed my_global.h, as this must be included first in any program include/heap.h: Added heap_reset() (Required by new handler interface) include/my_base.h: Removed HA_EXTRA_RESET. MySQL will now call ::reset() instead of ::extra(HA_EXTRA_RESET). HA_EXTRA_RETRIVE_ALL_COLS and HA_EXTRA_RETRIVE_PRIMARY key are deleted as the column bitmaps makes these unnecessary include/my_bitmap.h: Remove my_pthread.h (should be included at upper level) Introduced my_bitmap_map typedef to make it the bitmap handling more like a black box Added bitmap_is_overlapping(), bitmap_test_and_clear(), bitmap_copy() and bitmap_cmp() Made bitmap_set_bit(), bitmap_flip_bit(), bitmap_clear_bit() return void include/myisam.h: Added mi_reset() (Required by new handler interface) include/myisammrg.h: Added myrg_reset() (Required by new handler interface) include/mysql_com.h: Added flag FIELD_IN_ADD_INDEX to be able to remove Field->add_index mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test: Added testing of CREATE ... SELECT in a mixed environment (This found some bugs that Mats is going to fix shortly) mysql-test/install_test_db.sh: Simplify ldata usage Added --tmpdir=. option to mysqld bootstrap (Removed some warnings when TMPDIR was wrongly set) mysql-test/mysql-test-run.pl: Added --tmpdir=. to bootstrap mysql-test/mysql-test-run.sh: Use copy instead of INSTALL_DB for master and slave databases. (Speeds up startup time a lot!) Remove snapshot directories at startup (removes some strange warnings) mysql-test/r/binlog_row_mix_innodb_myisam.result: Added testing of CREATE ... SELECT in a mixed environment (This found some bugs that Mats is going to fix shortly) mysql-test/r/binlog_stm_mix_innodb_myisam.result: Added testing of CREATE ... SELECT in a mixed environment mysql-test/r/create.result: Some extra tests of warnings and number of tables opened by CREATE ... SELECT mysql-test/r/federated.result: Drop some left over tables Added testing of multiple table update and multiple table delete (with and without keys) mysql-test/r/func_gconcat.result: Enable some disabled tests (converted them slightly to be predictable) mysql-test/r/func_time.result: Added drop of test function mysql-test/r/innodb_mysql.result: Added tests for CREATE ... SELECT mysql-test/r/insert.result: More tests Added testing of duplicate columns in insert mysql-test/r/loaddata.result: Added testing LOAD DATA ... SET ... mysql-test/r/multi_update.result: Test multi updates and deletes using primary key and without mysql-test/r/ndb_index_unique.result: Better error message mysql-test/r/ndb_replace.result: New correct result after fixing REPLACE handling with NDB mysql-test/r/rpl_ddl.result: Now we don't get these (wrong) warnings anymore mysql-test/r/view_grant.result: Drop used views mysql-test/t/create.test: Some extra tests of warnings and number of tables opened by CREATE ... SELECT mysql-test/t/federated.test: Drop some left over tables Added testing of multiple table update and multiple table delete (with and without keys) mysql-test/t/func_gconcat.test: Enable some disabled tests (converted them slightly to be predictable) mysql-test/t/func_time.test: Added drop of test function mysql-test/t/innodb_mysql.test: Added tests for CREATE ... SELECT mysql-test/t/insert.test: More tests Added testing of duplicate columns in insert mysql-test/t/loaddata.test: Added testing LOAD DATA ... SET ... mysql-test/t/multi_update.test: Test multi updates and deletes using primary key and without mysql-test/t/view_grant.test: Drop used views mysql-test/valgrind.supp: Added supression of not needed warnings when printing stack trace mysys/base64.c: Include my_global.h first mysys/my_bitmap.c: Added bitmap_is_overlapping(), bitmap_test_and_clear() and bitmap_copy() Changed logic of bitmap handling to be a bit more efficent (Did this together with Mikael Ronström) Now the 'extra, not used bits' in the bitmap are assumed to have a 'random value' and the bitmap functions are free to change them whenever needed. Changed how mutex is allocated to make 'bitmap_free()' function simpler. mysys/thr_lock.c: Added 0x before thread pointers (for easier comparison of DBUG traces) sql/event.cc: Ensure 'use_all_columns()' is used for event tables Don't print warning that event table is damaged if it doesn't exists. sql/field.cc: Added ASSERT_COLUMN_MARKED_FOR_WRITE in all store() methods and ASSERT_COLUMN_MARKED_FOR_READ in all val() methods to catch wrong setting if table->read_set and table->write_set (Rest of changes are only indentation cleanups) sql/field.h: Removed Field->query_id (replaced by table->read_set and table->write_set) Removed Field->fieldnr (use Field->field_index instead) Removed Field->add_index (Use Field->flags instead) Add Field->part_of_key_not_clustered (for usage in opt_range.cc) sql/filesort.cc: Added paramater sort_postion to filesort() to force sorting by position instead of storing all fields in the result set. This allowed me to remove checking of sql_command. Create a temporary column bitmap for fields that are used by the sorting process. Use column bitmaps instead of query_id sql/ha_berkeley.cc: Update to 'newer' table handler interface sql/ha_berkeley.h: Update to 'newer' table handler interface sql/ha_federated.cc: Update to 'newer' table handler interface Only read columns that are needed from remote server. In case of eq ranges, don't generate two conditions in the WHERE clause (this can still be optimized, but would require a bigger code change) Use 'simpler to use' XXXX_LEN' macros A bit simpler logic in ::write_row() when creating statements. In update, only include test of fields actually read. (This greatly simplifies the queries sent by the federated engine) Similar changes done for delete_row() sql/ha_federated.h: Update to 'newer' table handler interface Changed XXX_LEN macros to use sizeof(...)-1, to simplify usage in ha_federated.cc Added HA_PRIMARY_KEY_REQUIRED_FOR_DELETE to tell MySQL to read all primary key columns in case of DELETE sql/ha_heap.cc: Update to 'newer' table handler interface sql/ha_heap.h: Update to 'newer' table handler interface sql/ha_innodb.cc: Update to 'newer' table handler interface - Update innobase_create_handler() to new interface - Removed HA_NOT_EXACT_COUNT (not needed) - Renamed HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION. - Prefixed base status variables with 'stats' - Use table column bitmaps instead of ha_get_bit_in_read_set() - Added ::reset(), with code from ::extra(HA_EXTRA_RESET) - Removed HA_EXTRA_RETRIVE_ALL_COLS and HA_EXTRA_RETRIEVE_PRIMARY_KEY as the table->read_set and table->write_set bitmaps now are accurate sql/ha_innodb.h: Update to 'newer' table handler interface - table_flags are now ulonglong - Added reset() method - Removed not needed ha_retrieve_all_cols() and ha_retrieve_all_pk() columns. - Made build_template() a class function to be able to easier access class variables sql/ha_myisam.cc: Update to 'newer' table handler interface sql/ha_myisam.h: Update to 'newer' table handler interface sql/ha_myisammrg.cc: Update to 'newer' table handler interface sql/ha_myisammrg.h: Update to 'newer' table handler interface sql/ha_ndbcluster.cc: Update to 'newer' table handler interface Fixed use_blob_value() to be accurate In ::complemented_read() we have to check both the read and write bitmap as the old code did mark all changed columns also in the read map Correct dumping of field data with DBUG_DUMP Prefix addresses in DBUG_PRINT with 0x Fixed usage of not initialized memory Update to use field->flags & FIELD_IN_ADD_INDEX instead of field->add_index. sql/ha_ndbcluster.h: Update to 'newer' table handler interface sql/ha_ndbcluster_binlog.cc: Mark usage of all columns in ndbcluster binlog tables false -> FALSE, true -> TRUE Use table->s->all_set instead of creating a temporary bitmap. sql/ha_partition.cc: Update to 'newer' table handler interface Added memroot to initialise_partitions() and related functions to get faster memory allocation. partition_create_handler() is now responsible for initialisation of the partition object Some trivial optimizations and indentation fixes Ensure that table_flags() are up to date Removed documentation for removed HA_EXTRA flags Fixed 'strange' usage of m_file[i] in new_handlers_from_part_info()that worked in current code 'by chance' sql/ha_partition.h: Update to 'newer' table handler interface sql/handler.cc: create_xxx handler now takes MEMROOT as an argument to simplify memory allocation. Much simpler get_new_handler() (Initialization of the object is now handled by the create method for the engine) Moved all allocation of bitmap handling to the TABLE object (in table.cc) Added column_bitmaps_signal() to signal column usage changes. Changed binlog_log_row() to use the exiusting all_set bitmap in the table object. Added ha_reset() function to test that the file object is ok at end of statement and call handler::reset() Added use_hidden_primary_key() to signal handler that we we are going to read and update + delete the row and the handler should thus remember the position for the row sql/handler.h: Added HA_NO_TRANSACTIONS, HA_PARTIAL_COLUMN_READ, HA_REQUIRES_KEY_COLUMNS_FOR_DELETE,HA_PRIMARY_KEY_REQUIRED_FOR_DELETE and HA_HAS_RECORDS Removed HA_NOT_EXACT_COUNT, HA_READ_RND_SAME HA_DUPP_POS -> HA_DUPLICATE_POS HA_NOT_EXACT_COUNT replaced by HA_STATS_RECORDS_IS_EXACT, HA_HAS_RECORDS and records() HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION Added future row type 'ROW_TYPE_PAGES' Added MEM_ROOT to handlerton 'create' function Added ha_statistics, a structure for all status variable in the base handler class. Moved all status variables in the handler class into a stats structs to improve readability. ha_table_flags() is now a cached (not virtual) version of table_flags() reset() doesn't anymore call extra(HA_EXTRA_RESET) but is a function of it's own. Renamed dupp_ref to dup_ref Renamed not used handler::sortkey Moved read_set and write_set to TABLE structure handler::init() function added for cacheing of virtual constants from engine. sql/item.cc: Added register_field_in_read_map() for marking used columns in expression. This is used by filesort() for creating an optimal column bitmap while retrieving columns for sorting. Initalize value.cs_info.character_set_client to fix core dump bug with --debug set_query_id -> mark_used_columns Mark used columns in read_set OR write_set. sql/item.h: Removed reset_query_id_processor() as it's not needed anymore. Added register_field_in_read_map() Added extra argument to Item::walk() to indicate if we should also traverse sub queries. sql/item_cmpfunc.cc: Temporary mark used columns to be read/writable Update Item::walk to new interface sql/item_cmpfunc.h: Added extra argument to Item::walk() to indicate if we should also traverse sub queries. sql/item_func.cc: Update Item::walk() to new interface table_flags() -> ha_table_flags() sql/item_func.h: Update Item::walk() to new interface sql/item_row.cc: Update Item::walk() to new interface sql/item_row.h: Update Item::walk() to new interface sql/item_strfunc.h: Update Item::walk() to new interface sql/item_subselect.cc: Added Item_subselect::walk() (It was a bug it was missing before. Not sure what kind of bugs this could have caused) sql/item_subselect.h: Update Item::walk() to new interface sql/item_sum.cc: Update Item::walk() to new interface Updates for new handler interace sql/item_sum.h: Update Item::walk() to new interface sql/key.cc: Updates for new handler interace sql/log.cc: Mark all columns used for log tables Split options flag Ensured that second argument to trans_register_ha is a bool sql/log_event.cc: Fixed comments to be withing 79 characters Use OPTION_KEEP_LOG instead of OPTION_STATUS_NO_TRANS_UPDATE to remove wrong warnings Updates for new handler interface Use 0x%lx instead of %p (portability problem) sql/mysql_priv.h: Added OPTION_KEEP_LOG to indicate that we should replicate the binlog even on rollback Removed not used 'conds' argument to setup_tables sql/mysqld.cc: Indentation fixes and removed old comment sql/opt_range.cc: Update to new handler and bitmap interface. Fixed calls to cp_buffer_from_ref() and walk() (new argument). Create new temporary bitmaps for ror scans. (Needed because of handler changes and to get more accurate column bitmaps than before) Remove not needed file->ha_reset() call before file->close(). Some trivial optimization and indentation fixes. Use Field->part_of_key_not_clustered() to check if field is part of a key, instead of looping over all key parts. Added flag 'in_ror_merged_scan' to allow ::get_next() to know that we need a special column bitmap to only fetch pointer to record. This is needed because ror scan uses the same TABLE object but different file objects, which creates problem for the column bitmap handling. (This is a temporary solution. A better one would be to allocate an own TABLE object for ROR scans) Optimized bitmap handling in ror scans: - Start bitmap at position 0, not 1 - Use same bitmap size as in TABLE - Use table->read_set and table->write_set to create column bitmaps instead of looping over all fields in table sql/opt_range.h: Added 'in_ror_merged_scan' to indicate if we are doing a ROR scan Added temporary column bitmaps used in ROR scans sql/opt_sum.cc: Added get_ext_record_count() which is used in COUNT() optimization if handler has HA_HAS_RECORDS Note that we don't call this if handler has HA_STATS_RECORDS_IS_EXACT set. sql/protocol.cc: We need to mark columns as readable in ::store() as we sometimes return default value for fields to the user sql/records.cc: Updates for new handler interface sql/set_var.cc: Handle splitting OPTION_STATUS_NO_TRANS_UPDATE to two flags sql/share/errmsg.txt: Fixed wrong sql/sp.cc: Mark that we are using all columns for the proc table Update call to setup_tables() to use new prototype sql/sp_head.cc: Removed QQ comment sql/spatial.cc: Removed wrong QQ comment sql/sql_acl.cc: Mark that we need all columns for acl tables Supply memroot to some 'new' calls. Indentation fixes sql/sql_base.cc: set_query_id removed Ensure we call ha_reset() at end of each statement Mark read columns in read_set and changed columns in write_set (Before all columns was marked in read set) Fixed marking of some columns that was not proplerly marked before Maintain in TABLE->merge_keys set of all keys that are used in some way Removed not used 'conds' argument from setup_tables() Remove not used setting of 'dupp_field' in insert_fields() Added missing FN_LIBCHAR in mysql_rm_tmp_tables() (This has probably caused us to not properly remove temporary files after crash) sql/sql_bitmap.h: Added is_overlapping() sql/sql_class.cc: Slow_logs was not properly initialized, which could maybe cause extra/lost entries in slow log. set_query_id -> mark_used_columns Simpler variable usage in pack_row() (cleanup) Moved some variable declartion at start of function for better code readability sql/sql_class.h: Added enum_mark_columns Updated comments Renamed dupp_field -> dup_field Added virtual function 'can_rollback_data()' to select_insert() to be used in CREATE ... SELECT to optimize use of OPTION_STATUS_NO_TRANS_UPDATE. (This fixes a bug in CREATE ... SELECT where we did give wrong warnings when using non transacational tables) sql/sql_delete.cc: Updates to new handler interface Call table->mark_columns_needed_for_delete() to allow us to put additional columns in column usage maps if handler so requires. Call table->prepare_for_position() to tell handler that we are going to call ha_position(). Removed call to free_io_cache(). (io_cache is now removed in ha_reset()). Fixed calls to setup_tables() sql/sql_do.cc: Update call to setup_fields() sql/sql_handler.cc: Tell handler tables to always read all columns. Use temporary column map when storing value in field for later index usage sql/sql_help.cc: Makr all used fields to be read Update call to setup_fields() sql/sql_insert.cc: Tell handler we are going to update the auto_increment column dupp_field -> dup_field Set column usage bits for timestamp field. Call table->mark_columns_needed_for_insert() and table->mark_auto_increment_column() Removed not used argument from mysql_prepare_insert_check_table(). If we get an duplicate row on insert, change column map to read and write all columns while retrying the operatation. This is required by the definition of REPLACE and also ensures that fields that are only part of UPDATE are properly handled. This fixed a bug in NDB and REPLACE where REPLACE wrongly copied some column values from the replaced row. Setup new bitmaps for delayed insert rows Remove reseting of next_number_fields as it will be reset on next call to handler_insert() Fixed usage of thd->options and OPTION_STATUS_NO_TRANS_UPDATE. The issue was that one should not to reset this flag as it may be set by a previous statement. The way it was now used caused us to loose some warnings and get other wrong warnings when using non transactional tables mixed with transactional. I fixed it by introducing 'select_insert::can_rollback_data' to inform send_error() that the given statement can be rolled back (which in case of CREATE TABLE can always be done) Don't close tables created with CREATE ... SELECT but keep them in the table cache. Moved out MY_HOOKS from inside function (better readability) sql/sql_load.cc: Update to use new handler and column marking interface Update using setup_tables() sql/sql_olap.cc: Update calls to setup_tables Use enums instead of constants to setup_fields() sql/sql_parse.cc: Handle OPTION_KEEP_LOG: - Set it on CREATE TEMPORARY TABLE / DROP TABLE - Reset it when OPTION_STATUS_NO_TRANS_UPDATE is reset - Don't set it for CREATE ... SELECT (this is handled in select_create class) Remove reseting of OPTION_STATUS_NO_TRANS_UPDATE in begin_trans() as this should already be reset. If in autocommit mode, reset OPTION_KEEP_LOG and OPTION_STATUS_NO_TRANS_UPDATE to not give warnings in future commands sql/sql_partition.cc: Update walk() usage Trivial indentation fixes sql/sql_plugin.cc: Mark all columns as used for plugins sql/sql_prepare.cc: Added assert to find out hidden bugs in character_set_client (got an error in debug binary when this not set correctly) Updates for new handler interface Update calls to setup_fields() sql/sql_repl.cc: Indentation fixes sql/sql_select.cc: Update call to setup_tables() and setup_fields() Remove some old disabled code Update to new hadler interface Indentation cleanups Added column bitmaps for temporary tables. Remove updating of the removed slots in the Field class Added TABLE argument to cp_buffer_from_ref() (To be able to install temporary column maps) For internal temporary tables, use handler::write_row(), handler::delete_row() and handler::update_row() instead of handler::ha_xxxx() for faster execution. sql/sql_select.h: Indentaition fixes. Install temporary column usage maps when needed Added TABLE element to cp_buffer_from_ref() sql/sql_show.cc: Update to new handler interface Mark all columns used for internal tables. Style fixes. Added support for 'future' ROW_TYPE_PAGES. Don't allocate TMP_TABLE_PARAM with calloc. The 'init()' function will initialize the structure properly. sql/sql_table.cc: Update to new handler interface Simple my_snprintf -> strmake() Changed some constants to defines Don't test for NULL in primary key (as we a couple of line above force the PRIMARY KEY to be NOT NULL) Change field->add_index to use field->flags & FIELD_IN_ADD_INDEX Mark all columns as used for ALTER TABLE Style fixes Update call to filesort() sql/sql_trigger.h: Added friend functions to be able to test if triggers exists for table we are going to insert/update or delete in. sql/sql_udf.cc: Mark all columns as used for udf system table. sql/sql_union.cc: Update call to walk() Update to new handler interface sql/sql_update.cc: Remove query_id argument from compare_record() Use column bitmaps instead of query_id. We can't use compare_records() to skip updates for handlers that returns a partial column set and the read_set doesn't cover all columns in the write set, because compare_record() can't in this case know if a not read column changed value. Update call to setup_fields() Using separate column read and write sets allows for easier checking of timestamp field was set by statement. Removed call to free_io_cache() as this is now done in ha_reset() Call table->mark_columns_needed_for_update() and table->prepare_for_position() Style fixes sql/sql_view.cc: Style fixes sql/table.cc: Remove implicitely include 'errno.h' Remove code for building normalized path, as this is now identical to 'path' Remove field->fieldnr Added update of field->part_of_key_not_clustered() Create column bitmaps in TABLE and TABLE_SHARE Don't setup a temporary MEM_ROOT object as a thread specific variable for the handler. Instead we send the to-be-used MEMROOT to get_new_handler() Update to new handler interface Update call to walk() Added new functions: - st_table::clear_column_bitmaps() - st_table::prepare_for_position() - st_table::mark_columns_used_by_index() - st_table::restore_column_maps_after_mark_index() - st_table::mark_columns_used_by_index_no_reset() - st_table::mark_auto_increment_column() - st_table::mark_columns_needed_for_delete() - st_table::mark_columns_needed_for_update() - st_table::mark_columns_needed_for_insert() sql/table.h: Moved column usage bitmaps from handler to TABLE Added to TABLE_SHARE all_set and column_bitmap_size Added to TABLE merge_keys, bitmap_init_values, def_read_set, def_write_set, tmp_set, read_set and write_set. Declared all new table column bitmap functions Added TABLE functions column_bitmaps_set(), column_bitmaps_set_no_signal(), use_all_columns() and default_column_bitmaps() Added functions: tmp_use_all_columns() and tmp_restore_column_map() to temporarly switch column bitmaps Added functions: dbug_tmp_use_all_columns() and dbug_tmp_restore_column_map() to temporarly switch column bitmaps to avoid asserts in Field::store() and Field::val(). sql/tztime.cc: Mark all columns as used for timezone tables storage/archive/ha_archive.cc: Update to new handler interface storage/archive/ha_archive.h: Update to new handler interface storage/blackhole/ha_blackhole.cc: Update to new handler interface storage/blackhole/ha_blackhole.h: Update to new handler interface removed not needed flag HA_DUPP_POS storage/csv/ha_tina.cc: Update to new handler interface storage/csv/ha_tina.h: Update to new handler interface storage/example/ha_example.cc: Update to new handler interface storage/example/ha_example.h: Update to new handler interface storage/heap/hp_extra.c: Added heap_reset() (Required by new handler interface) storage/heap/hp_test2.c: Use heap_reset() storage/myisam/ft_boolean_search.c: Fixed compiler warning storage/myisam/mi_extra.c: Added mi_reset() (Required by new handler interface) storage/myisam/mi_search.c: Fixed DBUG_PRINT messages to use 0x%lx instead of %lx storage/myisam/mi_test2.c: Use mi_reset() storage/myisam/myisampack.c: Use mi_reset() storage/myisammrg/myrg_extra.c: Added myrg_reset() (Required by new handler interface) unittest/mysys/base64.t.c: Include my_global.h Don't include implictely include file 'stdlib.h'	20 years ago
unknown	a82d5e01ed	second patch for make distcheck	20 years ago
unknown	600b9f1d70	fixing make distcheck again. fix 1.	20 years ago
unknown	740077bdc5	unittest: rename .t to -t to be automake-friendly simplify Makefiles test_atomic.c: move to unittest, add GPL comment, fix warnings, convert to tap framework. configure: remove custom tests for available types, use AC_CHECK_TYPE instead x86-gcc.h: fix gcc -ansi errors while maintaining readability ignore: added -t unittest/mysys/base64-t.c: Rename: unittest/mysys/base64.t.c -> unittest/mysys/base64-t.c unittest/mysys/bitmap-t.c: Rename: unittest/mysys/bitmap.t.c -> unittest/mysys/bitmap-t.c unittest/mytap/t/basic-t.c: Rename: unittest/mytap/t/basic.t.c -> unittest/mytap/t/basic-t.c unittest/examples/no_plan-t.c: Rename: unittest/examples/no_plan.t.c -> unittest/examples/no_plan-t.c unittest/examples/simple-t.c: Rename: unittest/examples/simple.t.c -> unittest/examples/simple-t.c unittest/examples/skip-t.c: Rename: unittest/examples/skip.t.c -> unittest/examples/skip-t.c unittest/examples/skip_all-t.c: Rename: unittest/examples/skip_all.t.c -> unittest/examples/skip_all-t.c unittest/examples/todo-t.c: Rename: unittest/examples/todo.t.c -> unittest/examples/todo-t.c BitKeeper/etc/ignore: added -t config/ac-macros/misc.m4: remove custom AC_TRY_RUN tests for available types, use AC_CHECK_TYPE instead configure.in: remove custom tests for available types, use AC_CHECK_TYPE instead include/atomic/x86-gcc.h: fix gcc -ansi errors while maintaining readability include/my_global.h: remove custom tests for available types, use AC_CHECK_TYPE instead include/my_sys.h: add missing declaration mysys/Makefile.am: move test_atomic to unittest unittest/Makefile.am: simplifications, correct permissions in chmod unittest/README.txt: rename .t to -t to be automake-friendly unittest/examples/Makefile.am: rename .t to -t to be automake-friendly simplify Makefile unittest/mysys/Makefile.am: rename .t to -t to be automake-friendly simplify Makefile unittest/mysys/my_atomic-t.c: move mysys/test_atomic.c to unittest, add GPL comment, fix warnings, convert to tap framework. unittest/mytap/t/Makefile.am: rename .t to -t to be automake-friendly simplify Makefile unittest/unit.pl: rename .t to -t to be automake-friendly	20 years ago
unknown	f04b7da96f	fix for BSD make	20 years ago
unknown	61bd3fa055	mysql.spec.sh: Removed Berkeley DB configure.in: Adjusted Netware support basic.t.c: Change for Netware Makefile.am: Use thread safe libmysqlclient_r if it was built valgrind.supp: Hide report about strlen/_dl_init_paths ha_tina.cc: Temporarely disable CSV engine on Netware, as the engine depends on mmap() net_serv.cc: Include <sys/select.h> for Netware sql/net_serv.cc: Include <sys/select.h> for Netware storage/csv/ha_tina.cc: Temporarely disable CSV engine on Netware, as the engine depends on mmap() mysql-test/valgrind.supp: Hide report about strlen/_dl_init_paths tests/Makefile.am: Use thread safe libmysqlclient_r if it was built unittest/mytap/t/basic.t.c: Change for Netware configure.in: Adjusted Netware support support-files/mysql.spec.sh: Removed Berkeley DB	20 years ago
unknown	f543e65564	Several "unittest" files : Ensure that the configure result is used when compiling them. unittest/examples/no_plan.t.c: Ensure that the "configure" result is used when compiling this module. unittest/examples/skip_all.t.c: Ensure that the configure result is used when compiling this module. unittest/examples/todo.t.c: Ensure that the configure result is used when compiling this module. unittest/mytap/t/basic.t.c: Ensure that the configure result is used when compiling this module.	20 years ago
unknown	dc3e7bdc87	fix for make distcheck	20 years ago
unknown	6b44b419c5	Fixing HP-UX and AIX builds. unittest/mytap/tap.h: Handle __attribute__ more portably, fixing builds for HP-UX and AIX.	20 years ago
unknown	eb485ecedc	Makefile.am: Move -lmystrings after -ldbug, to define strmov() on HP-UX unittest/mysys/Makefile.am: Move -lmystrings after -ldbug, to define strmov() on HP-UX	20 years ago
unknown	3d185d7935	base64.t.c: Moved declarations to beginning of block unittest/mysys/base64.t.c: Moved declarations to beginning of block	20 years ago
unknown	17283aa5c3	add a file to EXTRA_DIST. Should fix broken bootstrap. unittest/Makefile.am: add unit.pl to the list of extra files, so that "make dist" picks it up.	20 years ago
unknown	78224d023a	Remove gcc-specific additions to AM_CFLAGS in unittest Makefile.am files unittest/examples/Makefile.am: Don't add gcc-specific flags to AM_CFLAGS unittest/mytap/t/Makefile.am: Don't add gcc-specific flags to AM_CFLAGS	20 years ago
unknown	d23064a668	Fix 'make distcheck' problems with new unittest code, and a small portability problem. BitKeeper/etc/ignore: Use a wildcard to ignore all unittest *.t files unittest/Makefile.am: Add unit to DISTCLEANFILES, and make sure to copy it from srcdir unittest/examples/Makefile.am: Use srcdir to find mytap header unittest/mysys/Makefile.am: Use srcdir to find mytap header unittest/mytap/t/Makefile.am: Use builddir for finding mytap library unittest/mytap/tap.c: Fix portability problem (declarations after code in C code)	20 years ago
unknown	24f672c003	WL#3208 (Adding TAP support): Making it portable to non-gcc compilers by defining __attribute__ macro for non-gcc compilers. unittest/mytap/Doxyfile: Expanding macros while generating documentation. unittest/mytap/tap.h: Defining __attribute__ macro for non-gcc builds.	20 years ago
unknown	a14de3b2db	WL#3206 (Add unit tests): More changes according to review comments. unittest/README.txt: Changes to manifest. unittest/mysys/bitmap.t.c: Removed unused functions and variables. Marked unused parameters as unused. No need to test every size up to 4096 bits, testing to 1024, but I think this is too much as well. unittest/unit.pl: Added test for version-specific function.	20 years ago
unknown	4f99f11e9c	WL#3206 (Adding unit tests): Added 'test' target to build and run tests. Added documentation. Added README.txt files. Fixing problem with initialization of the Test::Harness::Straps replacement. Added code to filter out non- test directories. unittest/Makefile.am: Adding 'test' target to build and run tests. unittest/examples/skip.t.c: Changing text for skip reason. unittest/examples/skip_all.t.c: Changing text for skip reason. unittest/mytap/tap.c: Adding copyright. Adding documentation. Minor code changes. unittest/mytap/tap.h: Adding copyright. Adding documentation. unittest/unit.pl: Initializing replacement Test::Harness::Straps properly. Adding code to filter non-test directories from default directories to use. unittest/README.txt: New BitKeeper file ``unittest/README.txt''	20 years ago

1 2

65 Commits (e3c8fb4a1cf2984cf1aa1fe31ba828de550f619c)