- Adds time and delay units
- Adds time domain tuning parameters entry and storage
- Adds pad-to-die delay property
- Adds time domain parameter interface for length / delay calculations
- Adds unit tracking for numerical constants through LIBEVAL
- Will need future work to truly propagate through binary expressions
- Adds time domain tuning to meander placers
- Adds time delay display to net inspector panel
- Modifies DRC to handle time domain constraints
This adds a toggle between outward ( |<--->| ) and inward
( -->|----|<-- ) dimensions.
The original merge request for this feature had more nice
features to it: automatic switching and an 'outward' version of the
radial dimension. However, both of these are very tricky problems, and
need more thought: for example, if the radial dimension is overloaded
into a diameter dimension based on the arrow direction, then you have
implement the fiddly concept of a prefix override, and it also make
the point editor much harder to make seamless.
So, rather then delay the very good and useful upgrade of
the "normal" ortho/aligned dimensions, just sidestep the
issue by not doing the radial lines or auto detection right now.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5819
CHANGED: PCB file format now supports saving/loading complex padstacks
CHANGED: PTH pads are now rendered per copper layer in the copper color;
the PTH pad color is no longer used.
ADDED: support for importing complex pad stacks from Altium PCBs
Enforce padstack-aware access to pad properties across KiCad
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8182
- Adds Component Class field to SCH_DIRECTIVE_LABEL
- Adds SCH_SYMBOLs to SCH_RULE_AREA item lists
- SCH_SYMBOLs resolve Component Class directives
- Netlist exporter / importer handles Component Class names
- Adds DRC expressions and functions
- Adds QA check for component class netlist export
Schematics, symbols, boards and footprints all get the ability to store
files inside their file structures. File lookups now have a
kicad-embed:// URI to allow various parts of KiCad to refer to files
stored in this manner.
kicad-embed://datasheet.pdf references the file named "datasheet.pdf"
embedded in the document. Embeds are allowed in schematics, boards,
symbols and footprints. Currently supported embeddings are Datasheets,
3D Models and drawingsheets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6918
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2376
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17827
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
the new attribute is:
"(attr (teardrop type padvia)))" or "(attr (teardrop (type track_end)))"
However (Work in Progress) writing this attribute in file is temporarily disabled.
1) Unify metrics between stroke and outline fonts
2) Unify handling of rotation and mirroring
3) Bug fixes in collision handling
4) Use of VECTOR2I (instead of VECTOR2D) for world-coordinates
5) Generate outline font overbar with rounded ends and fix rotation
bugs
6) Generate wxEVT_CHOICE events from FONT_CHOICE::SetFontSelection
7) Change text-item PNS SOLIDs to use compound shapes
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)
CHANGED: stitching vias can be placed on footprint pads and pick up their nets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
This allows the parser to properly interpret the sexpr version
of the footprint so that it can throw future format errors or
do version specific parsing properly.
Previously the fill for shapes inside a footprint was not being
properly imported from older versions becase the default of no
flag changed from representing filled to representing no fill.
Introduce explicit filling information, and continue to treat no
flag on a polygon as meaning it is filled (which is the legacy
behavior).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6393
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6390
JamesJCode
Jon Evans
Daniel Treffenstädt
Jeff Young
Hasan Jaafar
Fabien Corona
Tomasz Wlostowski
Seth Hillbrand
Alex Shvartzkop
Marek Roszko
Mike Williams
Roberto Fernandez Bautista
jean-pierre charras
Ola Rinta-Koski
Ian McInerney