@ -50,7 +50,7 @@
# include <dialog_gen_module_position_file_base.h>
/*
* The format of the kicad place file is :
* The ASCII format of the kicad place file is :
* # # # Module positions - created on 04 / 12 / 2012 15 : 24 : 24 # # #
* # # # Printed by Pcbnew version pcbnew ( 2012 - 11 - 30 BZR 3828 ) - testing
* # # Unit = inches , Angle = deg .
@ -68,8 +68,9 @@
* # # End
*/
# define PLACEFILE_UNITS_KEY wxT( "PlaceFileUnits" )
# define PLACEFILE_OPT_KEY wxT( "PlaceFileOpts" )
# define PLACEFILE_UNITS_KEY wxT( "PlaceFileUnits" )
# define PLACEFILE_OPT_KEY wxT( "PlaceFileOpts" )
# define PLACEFILE_FORMAT_KEY wxT( "PlaceFileFormat" )
# define PCB_BACK_SIDE 0
@ -113,6 +114,7 @@ private:
static int m_unitsOpt ;
static int m_fileOpt ;
static int m_fileFormat ;
void initDialog ( ) ;
void OnOutputDirectoryBrowseClicked ( wxCommandEvent & event ) ;
@ -146,6 +148,7 @@ private:
// Static members to remember choices
int DIALOG_GEN_MODULE_POSITION : : m_unitsOpt = 0 ;
int DIALOG_GEN_MODULE_POSITION : : m_fileOpt = 0 ;
int DIALOG_GEN_MODULE_POSITION : : m_fileFormat = 0 ;
// Use standard board side name. do not translate them,
// they are keywords in place file
@ -157,11 +160,13 @@ void DIALOG_GEN_MODULE_POSITION::initDialog()
m_config = Kiface ( ) . KifaceSettings ( ) ;
m_config - > Read ( PLACEFILE_UNITS_KEY , & m_unitsOpt , 1 ) ;
m_config - > Read ( PLACEFILE_OPT_KEY , & m_fileOpt , 0 ) ;
m_config - > Read ( PLACEFILE_FORMAT_KEY , & m_fileFormat , 0 ) ;
// Output directory
m_outputDirectoryName - > SetValue ( m_plotOpts . GetOutputDirectory ( ) ) ;
m_radioBoxUnits - > SetSelection ( m_unitsOpt ) ;
m_radioBoxFilesCount - > SetSelection ( m_fileOpt ) ;
m_rbFormat - > SetSelection ( m_fileFormat ) ;
m_sdbSizerButtonsOK - > SetDefault ( ) ;
}
@ -199,9 +204,12 @@ void DIALOG_GEN_MODULE_POSITION::OnOKButton( wxCommandEvent& event )
{
m_unitsOpt = m_radioBoxUnits - > GetSelection ( ) ;
m_fileOpt = m_radioBoxFilesCount - > GetSelection ( ) ;
m_fileFormat = m_rbFormat - > GetSelection ( ) ;
m_config - > Write ( PLACEFILE_UNITS_KEY , m_unitsOpt ) ;
m_config - > Write ( PLACEFILE_OPT_KEY , m_fileOpt ) ;
m_config - > Write ( PLACEFILE_FORMAT_KEY , m_fileFormat ) ;
// Set output directory and replace backslashes with forward ones
// (Keep unix convention in cfg files)
@ -210,10 +218,11 @@ void DIALOG_GEN_MODULE_POSITION::OnOKButton( wxCommandEvent& event )
dirStr . Replace ( wxT ( " \\ " ) , wxT ( " / " ) ) ;
m_plotOpts . SetOutputDirectory ( dirStr ) ;
m_parent - > SetPlotSettings ( m_plotOpts ) ;
CreateFiles ( ) ;
// the dialog is not closed here.
}
@ -223,11 +232,13 @@ bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
wxFileName fn ;
wxString msg ;
bool singleFile = OneFileOnly ( ) ;
bool useCSVfmt = m_fileFormat = = 1 ;
int fullcount = 0 ;
// Count the footprints to place, do not yet create a file
int fpcount = m_parent - > DoGenFootprintsPositionFile ( wxEmptyString , UnitsMM ( ) ,
ForceAllSmd ( ) , PCB_BOTH_SIDES ) ;
ForceAllSmd ( ) , PCB_BOTH_SIDES ,
useCSVfmt ) ;
if ( fpcount = = 0 )
{
wxMessageBox ( _ ( " No footprint for automated placement. " ) ) ;
@ -235,7 +246,7 @@ bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
}
// Create output directory if it does not exist (also transform it in
// absolute form ). Bail if it fails
// absolute path ). Bail if it fails
wxFileName outputDir = wxFileName : : DirName ( m_plotOpts . GetOutputDirectory ( ) ) ;
wxString boardFilename = m_parent - > GetBoard ( ) - > GetFileName ( ) ;
@ -264,10 +275,17 @@ bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
else
fn . SetName ( fn . GetName ( ) + wxT ( " - " ) + frontSideName ) ;
fn . SetExt ( FootprintPlaceFileExtension ) ;
if ( useCSVfmt )
{
fn . SetName ( fn . GetName ( ) + wxT ( " - " ) + FootprintPlaceFileExtension ) ;
fn . SetExt ( wxT ( " csv " ) ) ;
}
else
fn . SetExt ( FootprintPlaceFileExtension ) ;
fpcount = m_parent - > DoGenFootprintsPositionFile ( fn . GetFullPath ( ) , UnitsMM ( ) ,
ForceAllSmd ( ) , side ) ;
ForceAllSmd ( ) , side , useCSVfmt ) ;
if ( fpcount < 0 )
{
msg . Printf ( _ ( " Unable to create '%s'. " ) , GetChars ( fn . GetFullPath ( ) ) ) ;
@ -298,10 +316,17 @@ bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
fn = brd - > GetFileName ( ) ;
fn . SetPath ( outputDir . GetPath ( ) ) ;
fn . SetName ( fn . GetName ( ) + wxT ( " - " ) + backSideName ) ;
fn . SetExt ( wxT ( " pos " ) ) ;
if ( useCSVfmt )
{
fn . SetName ( fn . GetName ( ) + wxT ( " - " ) + FootprintPlaceFileExtension ) ;
fn . SetExt ( wxT ( " csv " ) ) ;
}
else
fn . SetExt ( FootprintPlaceFileExtension ) ;
fpcount = m_parent - > DoGenFootprintsPositionFile ( fn . GetFullPath ( ) , UnitsMM ( ) ,
ForceAllSmd ( ) , side ) ;
ForceAllSmd ( ) , side , useCSVfmt ) ;
if ( fpcount < 0 )
{
@ -390,7 +415,8 @@ void PCB_EDIT_FRAME::GenFootprintsPositionFile( wxCommandEvent& event )
*/
int PCB_EDIT_FRAME : : DoGenFootprintsPositionFile ( const wxString & aFullFileName ,
bool aUnitsMM ,
bool aForceSmdItems , int aSide )
bool aForceSmdItems , int aSide ,
bool aFormatCSV )
{
MODULE * footprint ;
@ -477,58 +503,99 @@ int PCB_EDIT_FRAME::DoGenFootprintsPositionFile( const wxString& aFullFileName,
// Switch the locale to standard C (needed to print floating point numbers)
LOCALE_IO toggle ;
// Write file header
fprintf ( file , " ### Module positions - created on %s ### \n " , TO_UTF8 ( DateAndTime ( ) ) ) ;
if ( aFormatCSV )
{
wxChar csv_sep = ' , ' ;
wxString Title = Pgm ( ) . App ( ) . GetAppName ( ) + wxT ( " " ) + GetBuildVersion ( ) ;
fprintf ( file , " ### Printed by Pcbnew version %s \n " , TO_UTF8 ( Title ) ) ;
// Set first line:;
fprintf ( file , " Ref%cVal%cPackage%cPosX%cPosY%cRot%cSide \n " ,
csv_sep , csv_sep , csv_sep , csv_sep , csv_sep , csv_sep ) ;
fputs ( unit_text , file ) ;
for ( int ii = 0 ; ii < footprintCount ; ii + + )
{
wxPoint footprint_pos ;
footprint_pos = list [ ii ] . m_Module - > GetPosition ( ) ;
footprint_pos - = File_Place_Offset ;
LAYER_NUM layer = list [ ii ] . m_Module - > GetLayer ( ) ;
wxASSERT ( layer = = F_Cu | | layer = = B_Cu ) ;
wxString line = list [ ii ] . m_Reference ;
line < < csv_sep ;
line < < list [ ii ] . m_Value ;
line < < csv_sep ;
line < < wxString ( list [ ii ] . m_Module - > GetFPID ( ) . GetFootprintName ( ) ) ;
line < < csv_sep ;
line < < wxString : : Format ( " %f%c%f%c%f " ,
footprint_pos . x * conv_unit , csv_sep ,
// Keep the Y axis oriented from bottom to top,
// ( change y coordinate sign )
- footprint_pos . y * conv_unit , csv_sep ,
list [ ii ] . m_Module - > GetOrientation ( ) / 10.0 ) ;
line < < csv_sep ;
line < < ( ( layer = = F_Cu ) ? frontSideName : backSideName ) ;
line < < ' \n ' ;
fputs ( TO_UTF8 ( line ) , file ) ;
}
}
else
{
// Write file header
fprintf ( file , " ### Module positions - created on %s ### \n " , TO_UTF8 ( DateAndTime ( ) ) ) ;
fputs ( " ## Side : " , file ) ;
wxString Title = Pgm ( ) . App ( ) . GetAppName ( ) + wxT ( " " ) + GetBuildVersion ( ) ;
fprintf ( file , " ### Printed by Pcbnew version %s \n " , TO_UTF8 ( Title ) ) ;
if ( aSide = = PCB_BACK_SIDE )
fputs ( TO_UTF8 ( backSideName ) , file ) ;
else if ( aSide = = PCB_FRONT_SIDE )
fputs ( TO_UTF8 ( frontSideName ) , file ) ;
else
fputs ( " All " , file ) ;
fputs ( unit_text , file ) ;
fputs ( " \n " , file ) ;
fputs ( " ## Side : " , file ) ;
fprintf ( file , " %-*s %-*s %-*s %9.9s %9.9s %8.8s %s \n " ,
int ( lenRefText ) , " # Ref " ,
int ( lenValText ) , " Val " ,
int ( lenPkgText ) , " Package " ,
" PosX " , " PosY " , " Rot " , " Side " ) ;
if ( aSide = = PCB_BACK_SIDE )
fputs ( TO_UTF8 ( backSideName ) , file ) ;
else if ( aSide = = PCB_FRONT_SIDE )
fputs ( TO_UTF8 ( frontSideName ) , file ) ;
else
fputs ( " All " , file ) ;
for ( int ii = 0 ; ii < footprintCount ; ii + + )
{
wxPoint footprint_pos ;
footprint_pos = list [ ii ] . m_Module - > GetPosition ( ) ;
footprint_pos - = File_Place_Offset ;
LAYER_NUM layer = list [ ii ] . m_Module - > GetLayer ( ) ;
wxASSERT ( layer = = F_Cu | | layer = = B_Cu ) ;
const wxString & ref = list [ ii ] . m_Reference ;
const wxString & val = list [ ii ] . m_Value ;
const wxString & pkg = list [ ii ] . m_Module - > GetFPID ( ) . GetFootprintName ( ) ;
fprintf ( file , " %-*s %-*s %-*s %9.4f %9.4f %8.4f %s \n " ,
lenRefText , TO_UTF8 ( ref ) ,
lenValText , TO_UTF8 ( val ) ,
lenPkgText , TO_UTF8 ( pkg ) ,
footprint_pos . x * conv_unit ,
// Keep the coordinates in the first quadrant,
// (i.e. change y sign
- footprint_pos . y * conv_unit ,
list [ ii ] . m_Module - > GetOrientation ( ) / 10.0 ,
( layer = = F_Cu ) ? TO_UTF8 ( frontSideName ) : TO_UTF8 ( backSideName ) ) ;
}
fputs ( " \n " , file ) ;
fprintf ( file , " %-*s %-*s %-*s %9.9s %9.9s %8.8s %s \n " ,
int ( lenRefText ) , " # Ref " ,
int ( lenValText ) , " Val " ,
int ( lenPkgText ) , " Package " ,
" PosX " , " PosY " , " Rot " , " Side " ) ;
for ( int ii = 0 ; ii < footprintCount ; ii + + )
{
wxPoint footprint_pos ;
footprint_pos = list [ ii ] . m_Module - > GetPosition ( ) ;
footprint_pos - = File_Place_Offset ;
LAYER_NUM layer = list [ ii ] . m_Module - > GetLayer ( ) ;
wxASSERT ( layer = = F_Cu | | layer = = B_Cu ) ;
const wxString & ref = list [ ii ] . m_Reference ;
const wxString & val = list [ ii ] . m_Value ;
const wxString & pkg = list [ ii ] . m_Module - > GetFPID ( ) . GetFootprintName ( ) ;
fprintf ( file , " %-*s %-*s %-*s %9.4f %9.4f %8.4f %s \n " ,
lenRefText , TO_UTF8 ( ref ) ,
lenValText , TO_UTF8 ( val ) ,
lenPkgText , TO_UTF8 ( pkg ) ,
footprint_pos . x * conv_unit ,
// Keep the coordinates in the first quadrant,
// (i.e. change y sign
- footprint_pos . y * conv_unit ,
list [ ii ] . m_Module - > GetOrientation ( ) / 10.0 ,
( layer = = F_Cu ) ? TO_UTF8 ( frontSideName ) : TO_UTF8 ( backSideName ) ) ;
}
// Write EOF
fputs ( " ## End \n " , file ) ;
// Write EOF
fputs ( " ## End \n " , file ) ;
}
fclose ( file ) ;
return footprintCount ;
jean-pierre charras
10 years ago