@ -95,7 +95,7 @@ static const wxString GenCADLayerNameFlipped[32] =
// These are the export origin (the auxiliary axis)
static int GencadOffsetX , GencadOffsetY ;
/* GerbTool chokes on units different than INCH so this is the conversion
/* GerbTool chokes on units different than INCH so this is the conversion
factor */
const static double SCALE_FACTOR = 10000.0 ;
@ -186,7 +186,7 @@ void PCB_EDIT_FRAME::ExportToGenCAD( wxCommandEvent& aEvent )
CreateComponentsSection ( file , pcb ) ;
CreateDevicesSection ( file , pcb ) ;
// In a similar way the netlist is split in net, track and route
// In a similar way the netlist is split in net, track and route
CreateSignalsSection ( file , pcb ) ;
CreateTracksInfoData ( file , pcb ) ;
CreateRoutesSection ( file , pcb ) ;
@ -194,7 +194,7 @@ void PCB_EDIT_FRAME::ExportToGenCAD( wxCommandEvent& aEvent )
fclose ( file ) ;
SetLocaleTo_Default ( ) ; // revert to the current locale
// Undo the footprints modifications (flipped footprints)
// Undo the footprints modifications (flipped footprints)
for ( module = pcb - > m_Modules ; module ! = NULL ; module = module - > Next ( ) )
{
if ( module - > flag )
@ -221,13 +221,13 @@ static int ViaSort(const void* aRefptr, const void* aObjptr )
TRACK * padcmp = * ( TRACK * * ) aObjptr ;
if ( padref - > m_Width ! = padcmp - > m_Width )
return padref - > m_Width - padcmp - > m_Width ;
return padref - > m_Width - padcmp - > m_Width ;
if ( padref - > GetDrillValue ( ) ! = padcmp - > GetDrillValue ( ) )
return padref - > GetDrillValue ( ) - padcmp - > GetDrillValue ( ) ;
return padref - > GetDrillValue ( ) - padcmp - > GetDrillValue ( ) ;
if ( padref - > ReturnMaskLayer ( ) ! = padcmp - > ReturnMaskLayer ( ) )
return padref - > ReturnMaskLayer ( ) - padcmp - > ReturnMaskLayer ( ) ;
return padref - > ReturnMaskLayer ( ) - padcmp - > ReturnMaskLayer ( ) ;
return 0 ;
}
@ -240,7 +240,7 @@ static void CreateArtworksSection( FILE* aFile )
fputs ( " $ENDARTWORKS \n \n " , aFile ) ;
}
// Emit PADS and PADSTACKS. They are sorted and emitted uniquely.
// Emit PADS and PADSTACKS. They are sorted and emitted uniquely.
// Via name is synthesized from their attributes, pads are numbered
static void CreatePadsShapesSection ( FILE * aFile , BOARD * aPcb )
{
@ -251,7 +251,7 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
padstacks . resize ( 1 ) ; // We count pads from 1
// The master layermask (i.e. the enabled layers) for padstack generation
unsigned master_layermask = aPcb - > GetBoard DesignSettings ( ) - > GetEnabledLayers ( ) ;
unsigned master_layermask = aPcb - > GetDesignSettings ( ) . GetEnabledLayers ( ) ;
fputs ( " $PADS \n " , aFile ) ;
@ -261,35 +261,35 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
pads . insert ( pads . end ( ) ,
aPcb - > m_NetInfo - > m_PadsFullList . begin ( ) ,
aPcb - > m_NetInfo - > m_PadsFullList . end ( ) ) ;
qsort ( & pads [ 0 ] , aPcb - > GetPadsCount ( ) , sizeof ( D_PAD * ) ,
PadListSortByShape ) ;
qsort ( & pads [ 0 ] , aPcb - > GetPadsCount ( ) , sizeof ( D_PAD * ) ,
PadListSortByShape ) ;
}
// The same for vias
for ( TRACK * track = aPcb - > m_Track ; track ! = NULL ; track = track - > Next ( ) )
for ( TRACK * track = aPcb - > m_Track ; track ! = NULL ; track = track - > Next ( ) )
{
if ( track - > Type ( ) = = PCB_VIA_T )
{
if ( track - > Type ( ) = = PCB_VIA_T )
{
vias . push_back ( track ) ;
}
vias . push_back ( track ) ;
}
}
qsort ( & vias [ 0 ] , vias . size ( ) , sizeof ( TRACK * ) , ViaSort ) ;
// Emit vias pads
TRACK * old_via = 0 ;
for ( unsigned i = 0 ; i < vias . size ( ) ; i + + )
for ( unsigned i = 0 ; i < vias . size ( ) ; i + + )
{
TRACK * via = vias [ i ] ;
if ( old_via & & 0 = = ViaSort ( & old_via , & via ) )
continue ;
old_via = via ;
viastacks . push_back ( via ) ;
fprintf ( aFile , " PAD V%d.%d.%X ROUND %g \n CIRCLE 0 0 %g \n " ,
via - > m_Width , via - > GetDrillValue ( ) ,
via - > ReturnMaskLayer ( ) ,
via - > GetDrillValue ( ) / SCALE_FACTOR ,
via - > m_Width / ( SCALE_FACTOR * 2 ) ) ;
TRACK * via = vias [ i ] ;
if ( old_via & & 0 = = ViaSort ( & old_via , & via ) )
continue ;
old_via = via ;
viastacks . push_back ( via ) ;
fprintf ( aFile , " PAD V%d.%d.%X ROUND %g \n CIRCLE 0 0 %g \n " ,
via - > m_Width , via - > GetDrillValue ( ) ,
via - > ReturnMaskLayer ( ) ,
via - > GetDrillValue ( ) / SCALE_FACTOR ,
via - > m_Width / ( SCALE_FACTOR * 2 ) ) ;
}
// Emit component pads
@ -311,7 +311,7 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
fprintf ( aFile , " PAD P%d " , pad - > GetSubRatsnest ( ) ) ;
padstacks . push_back ( pad ) ; // Will have its own padstack later
padstacks . push_back ( pad ) ; // Will have its own padstack later
int dx = pad - > m_Size . x / 2 ;
int dy = pad - > m_Size . y / 2 ;
@ -319,29 +319,29 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
{
default :
case PAD_CIRCLE :
fprintf ( aFile , " ROUND %g \n " ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
/* Circle is center, radius */
fprintf ( aFile , " ROUND %g \n " ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
/* Circle is center, radius */
fprintf ( aFile , " CIRCLE %g %g %g \n " ,
pad - > m_Offset . x / SCALE_FACTOR ,
- pad - > m_Offset . y / SCALE_FACTOR ,
pad - > m_Size . x / ( SCALE_FACTOR * 2 ) ) ;
pad - > m_Offset . x / SCALE_FACTOR ,
- pad - > m_Offset . y / SCALE_FACTOR ,
pad - > m_Size . x / ( SCALE_FACTOR * 2 ) ) ;
break ;
case PAD_RECT :
fprintf ( aFile , " RECTANGULAR %g \n " ,
fprintf ( aFile , " RECTANGULAR %g \n " ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
// Rectangle is begin, size *not* begin, end!
// Rectangle is begin, size *not* begin, end!
fprintf ( aFile , " RECTANGLE %g %g %g %g \n " ,
( - dx + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - dx + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - dy - pad - > m_Offset . y ) / SCALE_FACTOR ,
dx / ( SCALE_FACTOR / 2 ) , dy / ( SCALE_FACTOR / 2 ) ) ;
break ;
case PAD_OVAL : // Create outline by 2 lines and 2 arcs
case PAD_OVAL : // Create outline by 2 lines and 2 arcs
{
// OrCAD Layout call them OVAL or OBLONG - GenCAD call them FINGERs
fprintf ( aFile , " FINGER %g \n " ,
// OrCAD Layout call them OVAL or OBLONG - GenCAD call them FINGERs
fprintf ( aFile , " FINGER %g \n " ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
int dr = dx - dy ;
@ -349,30 +349,30 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
{
int radius = dy ;
fprintf ( aFile , " LINE %g %g %g %g \n " ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - radius ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - radius ) / SCALE_FACTOR ) ;
// GenCAD arcs are (start, end, center)
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - radius ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - radius ) / SCALE_FACTOR ) ;
// GenCAD arcs are (start, end, center)
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - radius ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + radius ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
- pad - > m_Offset . y / SCALE_FACTOR ) ;
fprintf ( aFile , " LINE %g %g %g %g \n " ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + radius ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + radius ) / SCALE_FACTOR ) ;
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + radius ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - radius ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - dr + pad - > m_Offset . x ) / SCALE_FACTOR ,
- pad - > m_Offset . y / SCALE_FACTOR ) ;
}
else // Vertical oval
@ -380,38 +380,38 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
dr = - dr ;
int radius = dx ;
fprintf ( aFile , " LINE %g %g %g %g \n " ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + dr ) / SCALE_FACTOR ) ;
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + dr ) / SCALE_FACTOR ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + dr ) / SCALE_FACTOR ,
pad - > m_Offset . x / SCALE_FACTOR ,
pad - > m_Offset . x / SCALE_FACTOR ,
( - pad - > m_Offset . y + dr ) / SCALE_FACTOR ) ;
fprintf ( aFile , " LINE %g %g %g %g \n " ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y + dr ) / SCALE_FACTOR ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ) ;
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ,
( radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ,
( - radius + pad - > m_Offset . x ) / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ,
pad - > m_Offset . x / SCALE_FACTOR ,
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ) ;
( - pad - > m_Offset . y - dr ) / SCALE_FACTOR ) ;
}
break ;
}
case PAD_TRAPEZOID :
fprintf ( aFile , " POLYGON %g \n " ,
fprintf ( aFile , " POLYGON %g \n " ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
// XXX TO BE IMPLEMENTED! and I don't know if it could be actually imported by something
// XXX TO BE IMPLEMENTED! and I don't know if it could be actually imported by something
break ;
}
}
@ -423,55 +423,55 @@ static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
// Via padstacks
for ( unsigned i = 0 ; i < viastacks . size ( ) ; i + + )
{
TRACK * via = viastacks [ i ] ;
unsigned mask = via - > ReturnMaskLayer ( ) & master_layermask ;
fprintf ( aFile , " PADSTACK VIA%d.%d.%X %g \n " ,
via - > m_Width , via - > GetDrillValue ( ) , mask ,
via - > GetDrillValue ( ) / SCALE_FACTOR ) ;
for ( int layer = 0 ; layer < 32 ; layer + + )
{
if ( mask & ( 1 < < layer ) )
{
fprintf ( aFile , " PAD V%d.%d.%X %s 0 0 \n " ,
via - > m_Width , via - > GetDrillValue ( ) ,
mask ,
TO_UTF8 ( GenCADLayerName [ layer ] ) ) ;
}
TRACK * via = viastacks [ i ] ;
unsigned mask = via - > ReturnMaskLayer ( ) & master_layermask ;
fprintf ( aFile , " PADSTACK VIA%d.%d.%X %g \n " ,
via - > m_Width , via - > GetDrillValue ( ) , mask ,
via - > GetDrillValue ( ) / SCALE_FACTOR ) ;
for ( int layer = 0 ; layer < 32 ; layer + + )
{
if ( mask & ( 1 < < layer ) )
{
fprintf ( aFile , " PAD V%d.%d.%X %s 0 0 \n " ,
via - > m_Width , via - > GetDrillValue ( ) ,
mask ,
TO_UTF8 ( GenCADLayerName [ layer ] ) ) ;
}
}
}
/* Component padstacks
CAM350 don ' t apply correctly the FLIP semantics for padstacks , i . e . doesn ' t
swap the top and bottom layers . . . so I need to define the shape as MIRRORX
/* Component padstacks
CAM350 don ' t apply correctly the FLIP semantics for padstacks , i . e . doesn ' t
swap the top and bottom layers . . . so I need to define the shape as MIRRORX
and define a separate ' flipped ' padstack . . . until it appears yet another
noncompliant importer */
for ( unsigned i = 1 ; i < padstacks . size ( ) ; i + + )
{
D_PAD * pad = padstacks [ i ] ;
D_PAD * pad = padstacks [ i ] ;
// Straight padstack
fprintf ( aFile , " PADSTACK PAD%d %g \n " , i ,
// Straight padstack
fprintf ( aFile , " PADSTACK PAD%d %g \n " , i ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
for ( int layer = 0 ; layer < 32 ; layer + + )
{
if ( pad - > m_layerMask & ( 1 < < layer ) & master_layermask )
{
fprintf ( aFile , " PAD P%d %s 0 0 \n " , i ,
TO_UTF8 ( GenCADLayerName [ layer ] ) ) ;
}
}
// Flipped padstack
fprintf ( aFile , " PADSTACK PAD%dF %g \n " , i ,
for ( int layer = 0 ; layer < 32 ; layer + + )
{
if ( pad - > m_layerMask & ( 1 < < layer ) & master_layermask )
{
fprintf ( aFile , " PAD P%d %s 0 0 \n " , i ,
TO_UTF8 ( GenCADLayerName [ layer ] ) ) ;
}
}
// Flipped padstack
fprintf ( aFile , " PADSTACK PAD%dF %g \n " , i ,
pad - > m_Drill . x / SCALE_FACTOR ) ;
for ( int layer = 0 ; layer < 32 ; layer + + )
{
if ( pad - > m_layerMask & ( 1 < < layer ) & master_layermask )
for ( int layer = 0 ; layer < 32 ; layer + + )
{
if ( pad - > m_layerMask & ( 1 < < layer ) & master_layermask )
{
fprintf ( aFile , " PAD P%d %s 0 0 \n " , i ,
TO_UTF8 ( GenCADLayerNameFlipped [ layer ] ) ) ;
}
}
fprintf ( aFile , " PAD P%d %s 0 0 \n " , i ,
TO_UTF8 ( GenCADLayerNameFlipped [ layer ] ) ) ;
}
}
}
fputs ( " $ENDPADSTACKS \n \n " , aFile ) ;
}
@ -498,20 +498,20 @@ static void CreateShapesSection( FILE* aFile, BOARD* aPcb )
for ( pad = module - > m_Pads ; pad ! = NULL ; pad = pad - > Next ( ) )
{
/* Funny thing: GenCAD requires the pad side even if you use
padstacks ( which are theorically optional but gerbtools
* requires * them ) . Now the trouble thing is that ' BOTTOM '
is interpreted by someone as a padstack flip even
if the spec explicitly says it ' s not . . . */
/* Funny thing: GenCAD requires the pad side even if you use
padstacks ( which are theorically optional but gerbtools
* requires * them ) . Now the trouble thing is that ' BOTTOM '
is interpreted by someone as a padstack flip even
if the spec explicitly says it ' s not . . . */
layer = " ALL " ;
if ( ( pad - > m_layerMask & ALL_CU_LAYERS ) = = LAYER_BACK )
{
layer = ( module - > flag ) ? " TOP " : " BOTTOM " ;
layer = ( module - > flag ) ? " TOP " : " BOTTOM " ;
}
else if ( ( pad - > m_layerMask & ALL_CU_LAYERS ) = = LAYER_FRONT )
{
layer = ( module - > flag ) ? " BOTTOM " : " TOP " ;
layer = ( module - > flag ) ? " BOTTOM " : " TOP " ;
}
pad - > ReturnStringPadName ( pinname ) ;
@ -522,12 +522,12 @@ static void CreateShapesSection( FILE* aFile, BOARD* aPcb )
orient = pad - > m_Orient - module - > m_Orient ;
NORMALIZE_ANGLE_POS ( orient ) ;
// Bottom side modules use the flipped padstack
fprintf ( aFile , ( module - > flag ) ?
" PIN %s PAD%dF %g %g %s %g %s \n " :
" PIN %s PAD%d %g %g %s %g %s \n " ,
// Bottom side modules use the flipped padstack
fprintf ( aFile , ( module - > flag ) ?
" PIN %s PAD%dF %g %g %s %g %s \n " :
" PIN %s PAD%d %g %g %s %g %s \n " ,
TO_UTF8 ( pinname ) , pad - > GetSubRatsnest ( ) ,
pad - > m_Pos0 . x / SCALE_FACTOR ,
pad - > m_Pos0 . x / SCALE_FACTOR ,
- pad - > m_Pos0 . y / SCALE_FACTOR ,
layer , orient / 10.0 , mirror ) ;
}
@ -548,15 +548,15 @@ static void CreateComponentsSection( FILE* aFile, BOARD* aPcb )
for ( MODULE * module = aPcb - > m_Modules ; module ! = NULL ; module = module - > Next ( ) )
{
TEXTE_MODULE * textmod ;
const char * mirror ;
const char * flip ;
TEXTE_MODULE * textmod ;
const char * mirror ;
const char * flip ;
int orient = module - > m_Orient ;
if ( module - > flag )
{
mirror = " 0 " ;
flip = " FLIP " ;
mirror = " 0 " ;
flip = " FLIP " ;
NEGATE_AND_NORMALIZE_ANGLE_POS ( orient ) ;
}
else
@ -565,21 +565,21 @@ static void CreateComponentsSection( FILE* aFile, BOARD* aPcb )
flip = " 0 " ;
}
fprintf ( aFile , " \n COMPONENT %s \n " ,
TO_UTF8 ( module - > m_Reference - > m_Text ) ) ;
fprintf ( aFile , " DEVICE %s_%s \n " ,
TO_UTF8 ( module - > m_Reference - > m_Text ) ,
TO_UTF8 ( module - > m_Value - > m_Text ) ) ;
fprintf ( aFile , " PLACE %g %g \n " ,
MapXTo ( module - > m_Pos . x ) ,
MapYTo ( module - > m_Pos . y ) ) ;
fprintf ( aFile , " LAYER %s \n " ,
( module - > flag ) ? " BOTTOM " : " TOP " ) ;
fprintf ( aFile , " ROTATION %g \n " ,
orient / 10.0 ) ;
fprintf ( aFile , " SHAPE %s %s %s \n " ,
TO_UTF8 ( module - > m_Reference - > m_Text ) ,
mirror , flip ) ;
fprintf ( aFile , " \n COMPONENT %s \n " ,
TO_UTF8 ( module - > m_Reference - > m_Text ) ) ;
fprintf ( aFile , " DEVICE %s_%s \n " ,
TO_UTF8 ( module - > m_Reference - > m_Text ) ,
TO_UTF8 ( module - > m_Value - > m_Text ) ) ;
fprintf ( aFile , " PLACE %g %g \n " ,
MapXTo ( module - > m_Pos . x ) ,
MapYTo ( module - > m_Pos . y ) ) ;
fprintf ( aFile , " LAYER %s \n " ,
( module - > flag ) ? " BOTTOM " : " TOP " ) ;
fprintf ( aFile , " ROTATION %g \n " ,
orient / 10.0 ) ;
fprintf ( aFile , " SHAPE %s %s %s \n " ,
TO_UTF8 ( module - > m_Reference - > m_Text ) ,
mirror , flip ) ;
// Text on silk layer: RefDes and value (are they actually useful?)
textmod = module - > m_Reference ;
@ -587,11 +587,11 @@ static void CreateComponentsSection( FILE* aFile, BOARD* aPcb )
for ( int ii = 0 ; ii < 2 ; ii + + )
{
int orient = textmod - > m_Orient ;
wxString layer = GenCADLayerName [ ( module - > flag ) ?
SILKSCREEN_N_BACK : SILKSCREEN_N_FRONT ] ;
wxString layer = GenCADLayerName [ ( module - > flag ) ?
SILKSCREEN_N_BACK : SILKSCREEN_N_FRONT ] ;
fprintf ( aFile , " TEXT %g %g %g %g %s %s \" %s \" " ,
textmod - > m_Pos0 . x / SCALE_FACTOR ,
textmod - > m_Pos0 . x / SCALE_FACTOR ,
- textmod - > m_Pos0 . y / SCALE_FACTOR ,
textmod - > m_Size . x / SCALE_FACTOR ,
orient / 10.0 ,
@ -599,10 +599,10 @@ static void CreateComponentsSection( FILE* aFile, BOARD* aPcb )
TO_UTF8 ( layer ) ,
TO_UTF8 ( textmod - > m_Text ) ) ;
// Please note, the width is approx
// Please note, the width is approx
fprintf ( aFile , " 0 0 %g %g \n " ,
( textmod - > m_Size . x * textmod - > m_Text . Len ( ) )
/ SCALE_FACTOR ,
( textmod - > m_Size . x * textmod - > m_Text . Len ( ) )
/ SCALE_FACTOR ,
textmod - > m_Size . y / SCALE_FACTOR ) ;
textmod = module - > m_Value ; // Dirty trick for the second iteration
@ -671,7 +671,7 @@ static void CreateSignalsSection( FILE* aFile, BOARD* aPcb )
}
/* Creates the header section; some of the data come from the frame
/* Creates the header section; some of the data come from the frame
* ( actually the screen ) , not from the pcb */
static bool CreateHeaderInfoData ( FILE * aFile , PCB_EDIT_FRAME * aFrame )
{
@ -683,18 +683,18 @@ static bool CreateHeaderInfoData( FILE* aFile, PCB_EDIT_FRAME* aFrame )
// Please note: GenCAD syntax requires quoted strings if they can contain spaces
msg . Printf ( wxT ( " USER \" %s %s \" \n " ) ,
GetChars ( wxGetApp ( ) . GetAppName ( ) ) ,
GetChars ( GetBuildVersion ( ) ) ) ;
fputs ( TO_UTF8 ( msg ) , aFile ) ;
GetChars ( wxGetApp ( ) . GetAppName ( ) ) ,
GetChars ( GetBuildVersion ( ) ) ) ;
fputs ( TO_UTF8 ( msg ) , aFile ) ;
msg = wxT ( " DRAWING \" " ) + screen - > GetFileName ( ) + wxT ( " \" \n " ) ;
fputs ( TO_UTF8 ( msg ) , aFile ) ;
msg = wxT ( " REVISION \" " ) + screen - > m_Revision + wxT ( " " ) +
screen - > m_Date + wxT ( " \" \n " ) ;
fputs ( TO_UTF8 ( msg ) , aFile ) ;
msg = wxT ( " REVISION \" " ) + screen - > m_Revision + wxT ( " " ) +
screen - > m_Date + wxT ( " \" \n " ) ;
fputs ( TO_UTF8 ( msg ) , aFile ) ;
fputs ( " UNITS INCH \n " , aFile ) ;
msg . Printf ( wxT ( " ORIGIN %g %g \n " ) ,
MapXTo ( aFrame - > m_Auxiliary_Axis_Position . x ) ,
MapYTo ( aFrame - > m_Auxiliary_Axis_Position . y ) ) ;
msg . Printf ( wxT ( " ORIGIN %g %g \n " ) ,
MapXTo ( aFrame - > m_Auxiliary_Axis_Position . x ) ,
MapYTo ( aFrame - > m_Auxiliary_Axis_Position . y ) ) ;
fputs ( TO_UTF8 ( msg ) , aFile ) ;
fputs ( " INTERTRACK 0 \n " , aFile ) ;
fputs ( " $ENDHEADER \n \n " , aFile ) ;
@ -742,7 +742,7 @@ static void CreateRoutesSection( FILE* aFile, BOARD* aPcb )
int vianum = 1 ;
int old_netcode , old_width , old_layer ;
int nbitems , ii ;
unsigned master_layermask = aPcb - > GetBoard DesignSettings ( ) - > GetEnabledLayers ( ) ;
unsigned master_layermask = aPcb - > GetDesignSettings ( ) . GetEnabledLayers ( ) ;
// Count items
nbitems = 0 ;
@ -817,7 +817,7 @@ static void CreateRoutesSection( FILE* aFile, BOARD* aPcb )
if ( track - > Type ( ) = = PCB_VIA_T )
{
fprintf ( aFile , " VIA VIA%d.%d.%X %g %g ALL %g via%d \n " ,
track - > m_Width , track - > GetDrillValue ( ) ,
track - > m_Width , track - > GetDrillValue ( ) ,
track - > ReturnMaskLayer ( ) & master_layermask ,
MapXTo ( track - > m_Start . x ) , MapYTo ( track - > m_Start . y ) ,
track - > GetDrillValue ( ) / SCALE_FACTOR , vianum + + ) ;
@ -844,9 +844,9 @@ static void CreateDevicesSection( FILE* aFile, BOARD* aPcb )
{
fprintf ( aFile , " DEVICE \" %s \" \n " , TO_UTF8 ( module - > m_Reference - > m_Text ) ) ;
fprintf ( aFile , " PART \" %s \" \n " , TO_UTF8 ( module - > m_Value - > m_Text ) ) ;
fprintf ( aFile , " PACKAGE \" %s \" \n " , TO_UTF8 ( module - > m_LibRef ) ) ;
// The TYPE attribute is almost freeform
const char * ty = " TH " ;
fprintf ( aFile , " PACKAGE \" %s \" \n " , TO_UTF8 ( module - > m_LibRef ) ) ;
// The TYPE attribute is almost freeform
const char * ty = " TH " ;
if ( module - > m_Attributs & MOD_CMS )
ty = " SMD " ;
if ( module - > m_Attributs & MOD_VIRTUAL )
@ -864,22 +864,22 @@ static void CreateDevicesSection( FILE* aFile, BOARD* aPcb )
static void CreateBoardSection ( FILE * aFile , BOARD * aPcb )
{
fputs ( " $BOARD \n " , aFile ) ;
// Extract the board edges
// Extract the board edges
for ( EDA_ITEM * drawing = aPcb - > m_Drawings ;
drawing ! = 0 ;
drawing = drawing - > Next ( ) )
drawing ! = 0 ;
drawing = drawing - > Next ( ) )
{
if ( drawing - > Type ( ) = = PCB_LINE_T )
{
DRAWSEGMENT * drawseg = dynamic_cast < DRAWSEGMENT * > ( drawing ) ;
if ( drawseg - > GetLayer ( ) = = EDGE_N )
{
// XXX GenCAD supports arc boundaries but I've seen nothing that reads them
fprintf ( aFile , " LINE %g %g %g %g \n " ,
MapXTo ( drawseg - > m_Start . x ) , MapYTo ( drawseg - > m_Start . y ) ,
MapXTo ( drawseg - > m_End . x ) , MapYTo ( drawseg - > m_End . y ) ) ;
}
}
if ( drawing - > Type ( ) = = PCB_LINE_T )
{
DRAWSEGMENT * drawseg = dynamic_cast < DRAWSEGMENT * > ( drawing ) ;
if ( drawseg - > GetLayer ( ) = = EDGE_N )
{
// XXX GenCAD supports arc boundaries but I've seen nothing that reads them
fprintf ( aFile , " LINE %g %g %g %g \n " ,
MapXTo ( drawseg - > m_Start . x ) , MapYTo ( drawseg - > m_Start . y ) ,
MapXTo ( drawseg - > m_End . x ) , MapYTo ( drawseg - > m_End . y ) ) ;
}
}
}
fputs ( " $ENDBOARD \n \n " , aFile ) ;
}
@ -946,8 +946,8 @@ static void CreateTracksInfoData( FILE* aFile, BOARD* aPcb )
for ( ii = 0 ; ii < trackinfo . size ( ) ; ii + + )
{
fprintf ( aFile , " TRACK TRACK%d %g \n " , trackinfo [ ii ] ,
trackinfo [ ii ] / SCALE_FACTOR ) ;
fprintf ( aFile , " TRACK TRACK%d %g \n " , trackinfo [ ii ] ,
trackinfo [ ii ] / SCALE_FACTOR ) ;
}
fputs ( " $ENDTRACKS \n \n " , aFile ) ;
@ -964,23 +964,23 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
EDGE_MODULE * PtEdge ;
EDA_ITEM * PtStruct ;
// Control Y axis change sign for flipped modules
int Yaxis_sign = - 1 ;
int Yaxis_sign = - 1 ;
// Flip for bottom side components
// Flip for bottom side components
if ( module - > flag )
Yaxis_sign = 1 ;
/* creates header: */
fprintf ( aFile , " \n SHAPE %s \n " , TO_UTF8 ( module - > m_Reference - > m_Text ) ) ;
if ( module - > m_Attributs & MOD_VIRTUAL )
if ( module - > m_Attributs & MOD_VIRTUAL )
{
fprintf ( aFile , " INSERT SMD \n " ) ;
}
else
{
if ( module - > m_Attributs & MOD_CMS )
{
if ( module - > m_Attributs & MOD_CMS )
{
fprintf ( aFile , " INSERT SMD \n " ) ;
}
else
@ -1015,21 +1015,21 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
switch ( PtStruct - > Type ( ) )
{
case PCB_MODULE_TEXT_T :
// If we wanted to export text, this is not the correct section
// If we wanted to export text, this is not the correct section
break ;
case PCB_MODULE_EDGE_T :
PtEdge = ( EDGE_MODULE * ) PtStruct ;
if ( PtEdge - > GetLayer ( ) = = SILKSCREEN_N_FRONT
| | PtEdge - > GetLayer ( ) = = SILKSCREEN_N_BACK )
if ( PtEdge - > GetLayer ( ) = = SILKSCREEN_N_FRONT
| | PtEdge - > GetLayer ( ) = = SILKSCREEN_N_BACK )
{
switch ( PtEdge - > m_Shape )
{
case S_SEGMENT :
fprintf ( aFile , " LINE %g %g %g %g \n " ,
( PtEdge - > m_Start0 . x ) / SCALE_FACTOR ,
( PtEdge - > m_Start0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_Start0 . y ) / SCALE_FACTOR ,
( PtEdge - > m_End0 . x ) / SCALE_FACTOR ,
( PtEdge - > m_End0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_End0 . y ) / SCALE_FACTOR ) ;
break ;
@ -1039,13 +1039,13 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
( double ) ( PtEdge - > m_End0 . x - PtEdge - > m_Start0 . x ) ,
( double ) ( PtEdge - > m_End0 . y - PtEdge - > m_Start0 . y ) ) ;
fprintf ( aFile , " CIRCLE %g %g %g \n " ,
PtEdge - > m_Start0 . x / SCALE_FACTOR ,
PtEdge - > m_Start0 . x / SCALE_FACTOR ,
Yaxis_sign * PtEdge - > m_Start0 . y / SCALE_FACTOR ,
radius / SCALE_FACTOR ) ;
break ;
}
case S_ARC :
case S_ARC :
{
int arcendx , arcendy ;
arcendx = PtEdge - > m_End0 . x - PtEdge - > m_Start0 . x ;
@ -1053,36 +1053,36 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
RotatePoint ( & arcendx , & arcendy , - PtEdge - > m_Angle ) ;
arcendx + = PtEdge - > m_Start0 . x ;
arcendy + = PtEdge - > m_Start0 . y ;
if ( Yaxis_sign = = - 1 ) {
// Flipping Y flips the arc direction too
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( arcendx ) / SCALE_FACTOR ,
( Yaxis_sign * arcendy ) / SCALE_FACTOR ,
( PtEdge - > m_End0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_End0 . y ) / SCALE_FACTOR ,
( PtEdge - > m_Start0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_Start0 . y ) / SCALE_FACTOR ) ;
} else {
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( PtEdge - > m_End0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_End0 . y ) / SCALE_FACTOR ,
( arcendx ) / SCALE_FACTOR ,
( Yaxis_sign * arcendy ) / SCALE_FACTOR ,
( PtEdge - > m_Start0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_Start0 . y ) / SCALE_FACTOR ) ;
}
if ( Yaxis_sign = = - 1 ) {
// Flipping Y flips the arc direction too
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( arcendx ) / SCALE_FACTOR ,
( Yaxis_sign * arcendy ) / SCALE_FACTOR ,
( PtEdge - > m_End0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_End0 . y ) / SCALE_FACTOR ,
( PtEdge - > m_Start0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_Start0 . y ) / SCALE_FACTOR ) ;
} else {
fprintf ( aFile , " ARC %g %g %g %g %g %g \n " ,
( PtEdge - > m_End0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_End0 . y ) / SCALE_FACTOR ,
( arcendx ) / SCALE_FACTOR ,
( Yaxis_sign * arcendy ) / SCALE_FACTOR ,
( PtEdge - > m_Start0 . x ) / SCALE_FACTOR ,
( Yaxis_sign * PtEdge - > m_Start0 . y ) / SCALE_FACTOR ) ;
}
break ;
}
default :
DisplayError ( NULL , wxT ( " Type Edge Module invalid. " ) ) ;
break ;
}
}
}
break ;
default :
break ;
}
}
}
}
Dick Hollenbeck
14 years ago