* _PyPreConfig_Read() now sets temporarily LC_CTYPE to the user
preferred locale, as _PyPreConfig_Write() will do permanentely.
* Fix _PyCoreConfig_Clear(): clear run_xxx attributes
* _Py_SetArgcArgv() doesn't have to be exported
* _PyCoreConfig_SetGlobalConfig() no longer applies preconfig
* _PyPreConfig_Write() now reallocates the pre-configuration with the
new memory allocator.
* It is no longer needed to force the "default raw memory allocator"
to clear pre-configuration and core configuration. Simplify the
code.
* _PyPreConfig_Write() now does nothing if called after
Py_Initialize(): no longer check if the allocator is the same.
* Remove _PyMem_GetDebugAllocatorsName(): dev mode sets again
allocator to "debug".
* _PyPreConfig_Write() now sets the memory allocator.
* _PyPreConfig_Write() gets a return type: _PyInitError.
* _Py_InitializeCore() now reads and writes the pre-configuration
(set the memory allocator, configure the locale) before reading and
writing the core configuration.
* Move 'allocator' and 'dev_mode' fields from _PyCoreConfig
to _PyPreConfig.
* Fix InitConfigTests of test_embed: dev_mode sets allocator to
"debug", add a new tests for env vars with dev mode enabled.
* Move following fields from _PyCoreConfig to _PyPreConfig:
* coerce_c_locale
* coerce_c_locale_warn
* legacy_windows_stdio
* utf8_mode
* _PyPreConfig_ReadFromArgv() is now responsible to choose the
filesystem encoding
* _PyPreConfig_Write() now sets the LC_CTYPE locale
* Revert "bpo-36097: Use only public C-API in the_xxsubinterpreters module (adding as necessary). (#12003)"
This reverts commit bcfa450f21.
* Revert "bpo-33608: Simplify ceval's DISPATCH by hoisting eval_breaker ahead of time. (gh-12062)"
This reverts commit bda918bf65.
* Revert "bpo-33608: Use _Py_AddPendingCall() in _PyCrossInterpreterData_Release(). (gh-12024)"
This reverts commit b05b711a2c.
* Revert "bpo-33608: Factor out a private, per-interpreter _Py_AddPendingCall(). (GH-11617)"
This reverts commit ef4ac967e2.
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
* bpo-1054041: Exit properly by a signal after a ^C.
An uncaught KeyboardInterrupt exception means the user pressed ^C and
our code did not handle it. Programs that install SIGINT handlers are
supposed to reraise the SIGINT signal to the SIG_DFL handler in order
to exit in a manner that their calling process can detect that they
died due to a Ctrl-C. https://www.cons.org/cracauer/sigint.html
After this change on POSIX systems
while true; do python -c 'import time; time.sleep(23)'; done
can be stopped via a simple Ctrl-C instead of the shell infinitely
restarting a new python process.
What to do on Windows, or if anything needs to be done there has not
yet been determined. That belongs in its own PR.
TODO(gpshead): A unittest for this behavior is still needed.
* Do the unhandled ^C check after pymain_free.
* Return STATUS_CONTROL_C_EXIT on Windows.
* Fix ifdef around unistd.h include.
* 📜🤖 Added by blurb_it.
* Add STATUS_CTRL_C_EXIT to the os module on Windows
* Add unittests.
* Don't send CTRL_C_EVENT in the Windows test.
It was causing CI systems to bail out of the entire test suite.
See https://dev.azure.com/Python/cpython/_build/results?buildId=37980
for example.
* Correct posix test (fail on macOS?) check.
* STATUS_CONTROL_C_EXIT must be unsigned.
* Improve the error message.
* test typo :)
* Skip if the bash version is too old.
...and rename the windows test to reflect what it does.
* min bash version is 4.4, detect no bash.
* restore a blank line i didn't mean to delete.
* PyErr_Occurred() before the Py_DECREF(co);
* Don't add os.STATUS_CONTROL_C_EXIT as a constant.
* Update the Windows test comment.
* Refactor common logic into a run_eval_code_obj fn.
* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
Py_FatalError().
* Misc code cleanup
* The PyByteArray_Init() and PyByteArray_Fini() functions have been
removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
excluded from the limited API (stable ABI), and were not
documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
Include/cpython/pylifecycle.h to
Include/internal/pycore_pylifecycle.h. Replace
"PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
when done. Rewrite macros to make them look more like statement:
add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
calling Py_FatalError().
bpo-34523, bpo-35290: C locale coercion now resets the Python
internal "force ASCII" mode. This change fix the filesystem encoding
on FreeBSD CURRENT, which has a new "C.UTF-8" locale, when
the UTF-8 mode is disabled.
Add _Py_ResetForceASCII(): _Py_SetLocaleFromEnv() now calls it.
* The _PySys_EndInit() function now copies the
config->module_search_path list, so config is longer modified when
sys.path is updated.
* config->warnoptions list and config->xoptions dict are also copied
* test_embed: InitConfigTests now also tests
main_config['module_search_path']
* Fix _Py_InitializeMainInterpreter(): don't use config->warnoptions
but sys.warnoptions to decide if the warnings module should
be imported at startup.
* ast.h now includes Python-ast.h and node.h
* parsetok.h now includes node.h and grammar.h
* symtable.h now includes Python-ast.h
* Modify asdl_c.py to enhance Python-ast.h:
* Add #ifndef/#define Py_PYTHON_AST_H to be able to include the header
twice
* Add "extern { ... }" for C++
* Undefine "Yield" macro conflicting with winbase.h
* Remove "#undef Yield" from C files, it's now done in Python-ast.h
* Remove now useless includes in C files
* And pycore_lifecycle.h and pycore_pathconfig.h headers to
Include/internal/
* Move Py_BUILD_CORE specific code from coreconfig.h and
pylifecycle.h to pycore_pathconfig.h and pycore_lifecycle.h
* Move _Py_wstrlist_XXX() definitions and _PyPathConfig code
from pycore_state.h to pycore_pathconfig.h
* Move "Init" and "Fini" function definitions from pylifecycle.c to
pycore_lifecycle.h.
If Py_BUILD_CORE is defined, the PyThreadState_GET() macro access
_PyRuntime which comes from the internal pycore_state.h header.
Public headers must not require internal headers.
Move PyThreadState_GET() and _PyInterpreterState_GET_UNSAFE() from
Include/pystate.h to Include/internal/pycore_state.h, and rename
PyThreadState_GET() to _PyThreadState_GET() there.
The PyThreadState_GET() macro of pystate.h is now redefined when
pycore_state.h is included, to use the fast _PyThreadState_GET().
Changes:
* Add _PyThreadState_GET() macro
* Replace "PyThreadState_GET()->interp" with
_PyInterpreterState_GET_UNSAFE()
* Replace PyThreadState_GET() with _PyThreadState_GET() in internal C
files (compiled with Py_BUILD_CORE defined), but keep
PyThreadState_GET() in the public header files.
* _testcapimodule.c: replace PyThreadState_GET() with
PyThreadState_Get(); the module is not compiled with Py_BUILD_CORE
defined.
* pycore_state.h now requires Py_BUILD_CORE to be defined.
Don't call _Py_FatalError_PrintExc() nor flush_std_files() if the
current thread doesn't hold the GIL, or if the current thread
has no Python state thread.
Configuring python with ./configure --with-pydebug CFLAGS="-D COUNT_ALLOCS -O0"
makes "make smelly" fail as some symbols were being exported without the "Py_" or
"_Py" prefixes.
* Revert "bpo-34589: Add -X coerce_c_locale command line option (GH-9378)"
This reverts commit dbdee0073c.
* Revert "bpo-34589: C locale coercion off by default (GH-9073)"
This reverts commit 7a0791b699.
* Revert "bpo-34589: Make _PyCoreConfig.coerce_c_locale private (GH-9371)"
This reverts commit 188ebfa475.
_PyCoreConfig:
* Rename coerce_c_locale to _coerce_c_locale
* Rename coerce_c_locale_warn to _coerce_c_locale_warn
These fields are now private (name prefixed by "_").
GCC complains:
Python/pylifecycle.c: In function ‘_Py_InitializeFromConfig’:
Python/pylifecycle.c:900:13: warning: ‘interp’ may be used uninitialized in this function [-Wmaybe-uninitialized]
err = _Py_InitializeMainInterpreter(interp, &main_config);
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This seems spurious since &interp is passed to _Py_InitializeCore. Anyway, we
can easily initialize to quiet the warning.
Use the core configuration of the interpreter, rather
than using global configuration variables. For example, replace
Py_QuietFlag with core_config->quiet.
_PyCoreConfig_Read() is now responsible to choose the filesystem
encoding and error handler. Using Py_Main(), the encoding is now
chosen even before calling Py_Initialize().
_PyCoreConfig.filesystem_encoding is now the reference, instead of
Py_FileSystemDefaultEncoding, for the Python filesystem encoding.
Changes:
* Add filesystem_encoding and filesystem_errors to _PyCoreConfig
* _PyCoreConfig_Read() now reads the locale encoding for the file
system encoding.
* PyUnicode_EncodeFSDefault() and PyUnicode_DecodeFSDefaultAndSize()
now use the interpreter configuration rather than
Py_FileSystemDefaultEncoding and Py_FileSystemDefaultEncodeErrors
global configuration variables.
* Add _Py_SetFileSystemEncoding() and _Py_ClearFileSystemEncoding()
private functions to only modify Py_FileSystemDefaultEncoding and
Py_FileSystemDefaultEncodeErrors in coreconfig.c.
* _Py_CoerceLegacyLocale() now takes an int rather than
_PyCoreConfig for the warning.
On Windows, the LC_CTYPE is now set to the user preferred locale at
startup: _Py_SetLocaleFromEnv(LC_CTYPE) is now called during the
Python initialization. Previously, the LC_CTYPE locale was "C" at
startup, but changed when calling setlocale(LC_CTYPE, "") or
setlocale(LC_ALL, "").
pymain_read_conf() now also calls _Py_SetLocaleFromEnv(LC_CTYPE) to
behave as _Py_InitializeCore(). Moreover, it doesn't save/restore the
LC_ALL anymore.
On Windows, standard streams like sys.stdout now always use
surrogateescape error handler by default (ignore the locale).
Standard streams like sys.stdout now use the "surrogateescape" error
handler, instead of "strict", on the POSIX locale (when the C locale is not
coerced and the UTF-8 Mode is disabled).
Add tests on sys.stdout.errors with LC_ALL=POSIX.
* _Py_InitializeCore() now sets the LC_CTYPE locale to the user
preferred locale before checking if the C locale should be coerced
or not in _PyCoreConfig_Read().
* Fix pymain_read_conf(): remember if the C locale has been coerced
when the configuration should be read again if the encoding has
changed.
Python now gets the locale encoding with C code to initialize the encoding
of standard streams like sys.stdout. Moreover, the encoding is now
initialized to the Python codec name to get a normalized encoding name and
to ensure that the codec is loaded. The change avoids importing
_bootlocale and _locale modules at startup by default.
When the PYTHONIOENCODING environment variable only contains an encoding,
the error handler is now is now set explicitly to "strict".
Rename also get_default_standard_stream_error_handler() to
get_stdio_errors().
Reduce the buffer to format the "cpXXX" string (Windows locale encoding).
On HP-UX with C or POSIX locale, sys.getfilesystemencoding() now returns
"ascii" instead of "roman8" (when the UTF-8 Mode is disabled and the C locale
is not coerced).
nl_langinfo(CODESET) announces "roman8" whereas it uses the Latin1
encoding in practice.
* Add Include/coreconfig.h
* Move config_*() and _PyCoreConfig_*() functions from Modules/main.c
to a new Python/coreconfig.c file.
* Inline _Py_ReadHashSeed() into config_init_hash_seed()
* Move global configuration variables to coreconfig.c
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Eric Snow
Victor Stinner
Gregory P. Smith
Serhiy Storchaka
Pablo Galindo
Benjamin Peterson