_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Changes:
* _PyPathConfig_Fini() cannot be called in Py_FinalizeEx().
Py_Initialize() and Py_Finalize() can be called multiple times, but
it must not "forget" parameters set by Py_SetProgramName(),
Py_SetPath() or Py_SetPythonHome(), whereas _PyPathConfig_Fini()
clear all these parameters.
* config_get_program_name() and calculate_program_full_path() now
also decode paths using Py_DecodeLocale() to use the
surrogateescape error handler, rather than decoding using
mbstowcs() which is strict.
* Change _Py_CheckPython3() prototype: () => (void)
* Truncate a few lines which were too long
The current behaviour of yield expressions inside comprehensions and
generator expressions is essentially an accident of implementation - it
arises implicitly from the way the compiler handles yield expressions inside
nested functions and generators.
Since the current behaviour wasn't deliberately designed, and is inherently
confusing, we're deprecating it, with no current plans to reintroduce it.
Instead, our advice will be to use a named nested generator definition
for cases where this behaviour is desired.
When PyGILState_Ensure() is called in a non-Python thread before
PyEval_InitThreads(), only call PyEval_InitThreads() after calling
PyThreadState_New() to fix a crash.
Add an unit test in test_embed.
_Py_InitializeEx_Private() now calls
_PyMainInterpreterConfig_ReadEnv() to read environment variables
PYTHONHOME and PYTHONPATH, and set the program name.
* bpo-32101: Add sys.flags.dev_mode flag
Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
Mention it in the development chapiter.
* Fix _PyMem_SetupAllocators("debug"): always restore allocators to
the defaults, rather than only caling _PyMem_SetupDebugHooks().
* Add _PyMem_SetDefaultAllocator() helper to set the "default"
allocator.
* Add _PyMem_GetAllocatorsName(): get the name of the allocators
* main() now uses debug hooks on memory allocators if Py_DEBUG is
defined, rather than calling directly malloc()
* Document default memory allocators in C API documentation
* _Py_InitializeCore() now fails with a fatal user error if
PYTHONMALLOC value is an unknown memory allocator, instead of
failing with a fatal internal error.
* Add new tests on the PYTHONMALLOC environment variable
* Add support.with_pymalloc()
* Add the _testcapi.WITH_PYMALLOC constant and expose it as
support.with_pymalloc().
* sysconfig.get_config_var('WITH_PYMALLOC') doesn't work on Windows, so
replace it with support.with_pymalloc().
* pythoninfo: add _testcapi collector for pymem
The warnings module doesn't leak memory anymore in the hidden
warnings registry for the "ignore" action of warnings filters.
The warn_explicit() function doesn't add the warning key to the
registry anymore for the "ignore" action.
clang can't figure out that fatal_error is noreturn itself and emits warnings:
../cpython/Python/pylifecycle.c:2116:1: warning: function declared 'noreturn' should not return [-Winvalid-noreturn]
}
^
../cpython/Python/pylifecycle.c:2125:1: warning: function declared 'noreturn' should not return [-Winvalid-noreturn]
}
^
* Py_Main() now calls Py_SetProgramName() earlier to be able to get
the program name in _PyMainInterpreterConfig_ReadEnv().
* Rename prog to program_name
* Rename progpath to program_name
Py_GetPath() and Py_Main() now call
_PyMainInterpreterConfig_ReadEnv() to share the same code to get
environment variables.
Changes:
* Add _PyMainInterpreterConfig_ReadEnv()
* Add _PyMainInterpreterConfig_Clear()
* Add _PyMem_RawWcsdup()
* _PyMainInterpreterConfig: rename pythonhome to home
* Rename _Py_ReadMainInterpreterConfig() to
_PyMainInterpreterConfig_Read()
* Use _Py_INIT_USER_ERR(), instead of _Py_INIT_ERR(), for decoding
errors: the user is able to fix the issue, it's not a bug in
Python. Same change was made in _Py_INIT_NO_MEMORY().
* Remove _Py_GetPythonHomeWithConfig()
bpo-32096, bpo-30860: Partially revert the commit
2ebc5ce42a8a9e047e790aefbf9a94811569b2b6:
* Move structures back from Include/internal/mem.h to
Objects/obmalloc.c
* Remove _PyObject_Initialize() and _PyMem_Initialize()
* Remove Include/internal/pymalloc.h
* Add test_capi.test_pre_initialization_api():
Make sure that it's possible to call Py_DecodeLocale(), and then call
Py_SetProgramName() with the decoded string, before Py_Initialize().
PyMem_RawMalloc() and Py_DecodeLocale() can be called again before
_PyRuntimeState_Init().
Co-Authored-By: Eric Snow <ericsnowcurrently@gmail.com>
create_filter() now expects the action as a _Py_Identifier which
avoids string comparison, and more important, to avoid handling the
"unknown action" annoying case.
* calculate_path() rewritten in Modules/getpath.c and PC/getpathp.c
* Move global variables into a new PyPathConfig structure.
* calculate_path():
* Split the huge calculate_path() function into subfunctions.
* Add PyCalculatePath structure to pass data between subfunctions.
* Document PyCalculatePath fields.
* Move cleanup code into a new calculate_free() subfunction
* calculate_init() now handles Py_DecodeLocale() failures properly
* calculate_path() is now atomic: only replace PyPathConfig
(path_config) at once on success.
* _Py_GetPythonHomeWithConfig() now returns an error on failure
* Add _Py_INIT_NO_MEMORY() helper: report a memory allocation failure
* Coding style fixes (PEP 7)
* Py_Main() now reads the PYTHONHOME environment variable
* Add _Py_GetPythonHomeWithConfig() private function
* Add _PyWarnings_InitWithConfig()
* init_filters() doesn't get the current core configuration from the
current interpreter or Python thread anymore. Pass explicitly the
configuration to _PyWarnings_InitWithConfig().
* _Py_InitializeCore() now fails on _PyWarnings_InitWithConfig()
failure.
* Pass configuration as constant
Changes:
* Py_Main() initializes _PyCoreConfig.module_search_path_env from
the PYTHONPATH environment variable.
* PyInterpreterState_New() now initializes core_config and config
fields
* Compute sys.path a little bit ealier in
_Py_InitializeMainInterpreter() and new_interpreter()
* Add _Py_GetPathWithConfig() private function.
* Optimize warnings.filterwarnings(). Replace re.compile('') with
None to avoid the cost of calling a regex.match() method, whereas
it always matchs.
* Optimize get_warnings_attr(): replace PyObject_GetAttrString() with
_PyObject_GetAttrId().
Cleanup also create_filter():
* Use _Py_IDENTIFIER() to allow to cleanup strings at Python
finalization
* Replace Py_FatalError() with a regular exceptions
Py_Main() now handles two more -X options:
* -X showrefcount: new _PyCoreConfig.show_ref_count field
* -X showalloccount: new _PyCoreConfig.show_alloc_count field
The developer mode (-X dev) now creates all default warnings filters
to order filters in the correct order to always show ResourceWarning
and make BytesWarning depend on the -b option.
Write a functional test to make sure that ResourceWarning is logged
twice at the same location in the developer mode.
Add a new 'dev_mode' field to _PyCoreConfig.
When Python is build is debug mode (Py_DEBUG), DeprecationWarning,
PendingDeprecationWarning and ImportWarning warnings are now
displayed by default.
test_venv: run "-m pip" and "-m ensurepip._uninstall" with -W
ignore::DeprecationWarning since pip code is not part of Python.
Add a new "developer mode": new "-X dev" command line option to
enable debug checks at runtime.
Changes:
* Add unit tests for -X dev
* test_cmd_line: replace test.support with support.
* Fix _PyRuntimeState_Fini(): Use the same memory allocator
than _PyRuntimeState_Init().
* Fix _PyMem_GetDefaultRawAllocator()
Parse more env vars in Py_Main():
* Add more options to _PyCoreConfig:
* faulthandler
* tracemalloc
* importtime
* Move code to parse environment variables from _Py_InitializeCore()
to Py_Main(). This change fixes a regression from Python 3.6:
PYTHONUNBUFFERED is now read before calling pymain_init_stdio().
* _PyFaulthandler_Init() and _PyTraceMalloc_Init() now take an
argument to decide if the module has to be enabled at startup.
* tracemalloc_start() is now responsible to check the maximum number
of frames.
Other changes:
* Cleanup Py_Main():
* Rename some pymain_xxx() subfunctions
* Add pymain_run_python() subfunction
* Cleanup Py_NewInterpreter()
* _PyInterpreterState_Enable() now reports failure
* init_hash_secret() now considers pyurandom() failure as an "user
error": don't fail with abort().
* pymain_optlist_append() and pymain_strdup() now sets err on memory
allocation failure.
* Don't use "Python runtime" anymore to parse command line options or
to get environment variables: pymain_init() is now a strict
separation.
* Use an error message rather than "crashing" directly with
Py_FatalError(). Limit the number of calls to Py_FatalError(). It
prepares the code to handle errors more nicely later.
* Warnings options (-W, PYTHONWARNINGS) and "XOptions" (-X) are now
only added to the sys module once Python core is properly
initialized.
* _PyMain is now the well identified owner of some important strings
like: warnings options, XOptions, and the "program name". The
program name string is now properly freed at exit.
pymain_free() is now responsible to free the "command" string.
* Rename most methods in Modules/main.c to use a "pymain_" prefix to
avoid conflits and ease debug.
* Replace _Py_CommandLineDetails_INIT with memset(0)
* Reorder a lot of code to fix the initialization ordering. For
example, initializing standard streams now comes before parsing
PYTHONWARNINGS.
* Py_Main() now handles errors when adding warnings options and
XOptions.
* Add _PyMem_GetDefaultRawAllocator() private function.
* Cleanup _PyMem_Initialize(): remove useless global constants: move
them into _PyMem_Initialize().
* Call _PyRuntime_Initialize() as soon as possible:
_PyRuntime_Initialize() now returns an error message on failure.
* Add _PyInitError structure and following macros:
* _Py_INIT_OK()
* _Py_INIT_ERR(msg)
* _Py_INIT_USER_ERR(msg): "user" error, don't abort() in that case
* _Py_INIT_FAILED(err)
* Setting sys.tracebacklimit to 0 or less now suppresses printing tracebacks.
* Setting sys.tracebacklimit to None now causes using the default limit.
* Setting sys.tracebacklimit to an integer larger than LONG_MAX now means using
the limit LONG_MAX rather than the default limit.
* Fixed integer overflows in the case of more than 2**31 traceback items on
Windows.
* Fixed output errors handling.
Get rid of _PyObject_HasAttrId() and PyDict_GetItemString().
Silence only expected AttributeError, KeyError and ImportError when
get an attribute, look up in a dict or import a module.
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.
Same change for MB and GB which become MiB and GiB.
Change the output of Tools/iobench/iobench.py.
Round also the size of the documentation from 5.5 MB to 5 MiB.
Add new time functions:
* time.clock_gettime_ns()
* time.clock_settime_ns()
* time.monotonic_ns()
* time.perf_counter_ns()
* time.process_time_ns()
* time.time_ns()
Add new _PyTime functions:
* _PyTime_FromTimespec()
* _PyTime_FromNanosecondsObject()
* _PyTime_FromTimeval()
Other changes:
* Add also os.times() tests to test_os.
* pytime_fromtimeval() and pytime_fromtimeval() now return
_PyTime_MAX or _PyTime_MIN on overflow, rather than undefined
behaviour
* _PyTime_FromNanoseconds() parameter type changes from long long to
_PyTime_t
Serhiy Storchaka
Victor Stinner
Benjamin Peterson
xdegaye
luzpaz
Barry Warsaw
Ivan Levkivskyi